Ford Fiesta Service Bulletins (2018)
56 manufacturer communications on file.
- December 14, 2018•Document ID: 10153948Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- SSM 47711
- Date Added:
- March 4, 2019
- Manufacturer:
- FORD
SummarySome 2016-2019 Ford and Lincoln vehicles equipped with SYNC 3 and a 6, 8 or 10 inch screen may show a pop-up message every key cycle that states 'SYNC can check for updates when connected to a WiFi network'. To remove the inconvenience of the pop-up the customer can either connect to a trusted WiFi network to complete the setup process or turn off WiFi in the WiFi settings located under the Settings menu. Adjusting the setting for the customer is not a warrantable defect.
Associated Products (95)2019 Ford Edge2019 Ford Escape2019 Ford Explorer2019 Ford F-1502019 Ford F-2502019 Ford F-3502019 Ford F-4502019 Ford F-5502019 Ford F-6502019 Ford F-7502019 Ford Fiesta2019 Ford Flex2019 Ford Fusion2019 Ford Mustang2019 Ford Taurus2019 Ford Transit2019 Ford Transit Connect2019 Lincoln Continental2019 Lincoln MKC2019 Lincoln MKT+ 75 moreAssociated Documents - October 25, 2018•Document ID: 10148737Service Bulletin/Repair InstructionsEQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC.
- Mfr Comm. #:
- SSM 47617
- Date Added:
- November 19, 2018
- Manufacturer:
- FORD
SummarySome 2017 F-Super Duty, 2016-2017 Expedition/Navigator and 2016-2018 Focus/Fiesta vehicles may exhibit a concern where the radio reverts to an AM or FM station after shutting the vehicle off, leaving it off for at least 20 minutes, and then starting it back up. Do not perform any repairs for this concern. If a vehicle exhibits this concern, please use the Report a Vehicle Concern link at the bottom of the OASIS tab and submit a report. Engineering is investigating. Monitor OASIS for updates.
Associated Products (16)Associated Documents - September 21, 2018•Document ID: 10149770Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- SSM 47538
- Date Added:
- December 3, 2018
- Manufacturer:
- FORD
SummarySome 2016-2018 Ford and Lincoln vehicles equipped with SYNC 3 may exhibit the Android Auto Preference menu selection is not present after an update to version 3.0 software. In prior versions of SYNC 3 software this menu was present, however in version 3.0 software the Android Auto Preference menu will only show up once an Android Phone has been initially connected to SYNC. This an operating characteristic of the Android Auto application after the SYNC 3.0 update and no repairs should be attempted.
Associated Products (61)2018 Ford C-Max2018 Ford Edge2018 Ford Escape2018 Ford Explorer2018 Ford F-1502018 Ford F-2502018 Ford F-3502018 Ford Fiesta2018 Ford Flex2018 Ford Focus2018 Ford Mustang2018 Ford Taurus2018 Ford Transit2018 Ford Transit Connect2018 Lincoln Continental2018 Lincoln MKC2018 Lincoln MKT2018 Lincoln MKX2018 Lincoln MKZ2017 Ford C-Max+ 41 moreAssociated Documents - August 14, 2018•Document ID: 10144938Service Bulletin/Repair InstructionsSERVICE BRAKES
- Mfr Comm. #:
- SSM 47466
- Date Added:
- September 24, 2018
- Manufacturer:
- LINCOLN
SummarySome 2018 F-Superduty/F-150/Explorer/Taurus/Flex/MKT/Fiesta vehicles built on 8-Mar-2018 and through 18-Jun-2018 may exhibit a soft brake pedal and/or long brake pedal travel. Bleed the brake system per Workshop Manual (WSM), Section 206-00. For claiming, use causal part BRAKE and applicable labor operations in Section 02 of the Service Labor Time Standards (SLTS) Manual.
Associated Products (6)Associated Documents - August 2, 2018•Document ID: 10144930Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- SSM 47444
- Date Added:
- September 24, 2018
- Manufacturer:
- FORD
SummarySome 2016-2018 Ford and Lincoln vehicles equipped with SYNC 3 not at the latest software level may exhibit Various Performance Related concerns such as Display Operation, Navigation, Voice Recognition, Phone Pairing, Applink, Travel Link, Slow System Response, etc. Check for SYNC software update under the OASIS Tab SYNC selection. If an update is available refer to WSM, Section 415-00 and update the APIM software. After Installation, complete pop-up appears, remove USB flash drive and install into IDS tool to update Ford database. Perform a complete ignition cycle by turning the key off for 5 minutes which is critical for a successful installation. If no updates are available or a blue or black screen is present after an update refer to WSM, Section 415-00 for diagnosis or SYNC 3 intermittent blank screen GSB for tips. For claiming, use causal part 14G371 and applicable labor operations in section 10 of the SLTS manual.
Associated Products (59)2018 Ford C-Max2018 Ford Ecosport2018 Ford Edge2018 Ford Escape2018 Ford Explorer2018 Ford F-1502018 Ford Fiesta2018 Ford Flex2018 Ford Focus2018 Ford Fusion2018 Ford Mustang2018 Ford Taurus2018 Ford Transit2018 Ford Transit Connect2018 Lincoln Continental2018 Lincoln MKC2018 Lincoln MKT2018 Lincoln MKX2018 Lincoln MKZ2017 Ford C-Max+ 39 moreAssociated Documents - July 12, 2018•Document ID: 10144207Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- SSM 47409
- Date Added:
- September 10, 2018
- Manufacturer:
- FORD
SummarySome 2011-2018 Fiesta vehicles may exhibit various concerns following IPC replacement. Symptoms may include: no crank, Contact Hotline message, odometer displaying incorrect English or Metric units and/or diagnostic trouble code (DTC) U2101 in multiple modules. If programmable module installation (PMI) has been performed on the replacement IPC, disconnect the IPC, start a new session using the appropriate Ford scan tool and perform a PMI on the IPC. Do not reconnect the IPC until after the scan tool states it is unable to communicate with the IPC, then allow the PMI process to complete. This will automatically load the correct configuration and address any related DTCs or symptoms.
Associated Products (8)Associated Documents - July 11, 2018•Document ID: 10144204Service Bulletin/Repair InstructionsSERVICE BRAKES, AIR:DISC:CALIPER; SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:DISC:CALIPER
- Mfr Comm. #:
- SSM 47405
- Date Added:
- September 10, 2018
- Manufacturer:
- FORD
SummarySome 2018 Fiesta vehicles equipped with rear drum brakes built on 8-Mar-2018 and through and through 06-Jun-2018 may exhibit a soft brake pedal feel and/or long brake pedal travel. Replace both front brake caliper. Refer to the Workshop Manual (WSM) Section, 206-06. For claiming, use causal part 2B121 and applicable labor operations in Section 02 of the Service Labor Time Standards (SLTS) Manual.
Associated Products (1)Associated Documents - July 3, 2018•Document ID: 10144182Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING; ELECTRICAL SYSTEM; EQUIPMENT:APPLIANCE:AIR CONDITIONER
- Mfr Comm. #:
- tsb18-2185
- Date Added:
- September 10, 2018
- Manufacturer:
- FORD
SummaryThis article supersedes TSB 18-2024 to update the model years. Some 2011-2018 Fiesta vehicles may exhibit a lack of heat resulting from a frozen blower motor. This may be caused by snow entering through the cowl panel grille and screen assemblies. Snow may melt in the heating, ventilation and air conditioning (HVAC) case allowing water to enter the blower motor and freeze during a below freezing overnight soak. Blower motor fuse F4 in the battery junction box (BJB) may also be open and the cabin air filter may be saturated. Follow the Service Procedure steps to correct the condition.
Associated Products (8)Associated Documents - June 22, 2018•Document ID: 10143103Service Bulletin/Repair InstructionsEQUIPMENT; EQUIPMENT ADAPTIVE/MOBILITY; ELECTRICAL SYSTEM
- Mfr Comm. #:
- SSM 47380
- Date Added:
- July 23, 2018
- Manufacturer:
- LINCOLN
SummarySome 2016-2018 Ford and Lincoln vehicles with SYNC 3 may exhibit an intermittent blue or black screen. Check for SYNC software update under the OASIS Tab SYNC selection. If update is available refer to WSM, Section 415-00 and update APIM software. After Installation Complete pop-up appears, remove USB flash drive and install into IDS tool to update Ford database. Perform a complete ignition cycle by turning the key off for 5 minutes which is critical for a successful installation. If no updates are available or a blue or black screen is present after an update refer to WSM, Section 415-00 for diagnosis or SYNC 3 intermittent blank screen GSB for tips. For claiming, use causal part 14G371 and applicable labor operations in section 10 of the SLTS manual.
Associated Products (55)2018 Ford C-Max2018 Ford Ecosport2018 Ford Edge2018 Ford Escape2018 Ford Explorer2018 Ford F-1502018 Ford Fiesta2018 Ford Flex2018 Ford Focus2018 Ford Fusion2018 Ford Mustang2018 Ford Taurus2018 Ford Transit2018 Lincoln Continental2018 Lincoln MKC2018 Lincoln MKT2018 Lincoln MKX2018 Lincoln MKZ2017 Ford C-Max2017 Ford Edge+ 35 moreAssociated Documents - June 22, 2018•Document ID: 10143102Service Bulletin/Repair InstructionsEQUIPMENT; ELECTRICAL SYSTEM
- Mfr Comm. #:
- SSM 47379
- Date Added:
- July 23, 2018
- Manufacturer:
- FORD
SummaryVarious 2016-2018 vehicles with SYNC 3 may experience a touch screen that does not respond to any input. Using the Professional Technician Society (PTS) website > OASIS tab > SYNC version, verify the vehicle SYNC software version. If the vehicle is at version 2.2 please update the module to the latest software level. After the software is updated make sure you shut the vehicle off, open the door for 2 minutes, then turn the key back on before testing the touch screen. If the software is at a later version than 2.2, proceed with normal diagnostics in Workshop Manual (WSM), Section 415-00. For claiming, use causal part 14G371 and applicable labor operations in section 10 of the Service Labor Times Standards (SLTS) manual.
Associated Products (58)2018 Ford C-Max2018 Ford Ecosport2018 Ford Edge2018 Ford Escape2018 Ford Explorer2018 Ford F-1502018 Ford Fiesta2018 Ford Flex2018 Ford Focus2018 Ford Fusion2018 Ford Mustang2018 Ford Taurus2018 Ford Transit2018 Lincoln Continental2018 Lincoln MKC2018 Lincoln MKT2018 Lincoln MKX2018 Lincoln MKZ2017 Ford C-Max2017 Ford Edge+ 38 moreAssociated Documents - March 30, 2018•Document ID: 10137113Service Bulletin/Repair InstructionsEQUIPMENT
- Mfr Comm. #:
- SSM 47201
- Date Added:
- May 21, 2018
- Manufacturer:
- FORD
SummaryReplacing the original equipment SYNC/Navigation system with either an aftermarket SYNC/Navigation kit or modifying original SYNC/Navigation parts to provide additional features is not recommended nor supported on any Ford, Mercury or Lincoln vehicle. Only approved Genuine Ford accessories or originally installed systems are supported and certified to function correctly with other vehicle systems. If you suspect a system has been modified, the following resources can be used to verify original equipment: Monroney Label (Window Sticker), Professional Technician Society (PTS) OASIS tab select SYNC or HVBOM. For Genuine Ford accessories use: PTS Workshop Tab select Dealer Installed Accessory or Accessory Installation.
Associated Products (234)2018 Ford C-Max2018 Ford Ecosport2018 Ford Edge2018 Ford Escape2018 Ford Explorer2018 Ford F-1502018 Ford Fiesta2018 Ford Flex2018 Ford Fusion2018 Ford Mustang2018 Ford Taurus2018 Ford Transit2018 Lincoln Continental2018 Lincoln MKC2018 Lincoln MKT2018 Lincoln MKX2018 Lincoln MKZ2017 Ford C-Max2017 Ford Edge2017 Ford Escape+ 214 moreAssociated Documents - March 21, 2018•Document ID: 10137101Service Bulletin/Repair InstructionsPOWER TRAIN:AUTOMATIC TRANSMISSION
- Mfr Comm. #:
- SSM 47170
- Date Added:
- May 21, 2018
- Manufacturer:
- FORD
SummarySome vehicles may exhibit an illuminated MIL with diagnostic trouble codes (DTCs) P0011, P0012, P0014, P0015, P0016, P0017, P0018, P0019, P0021, P0022, P0024 and/or P0025. This may be due to small debris causing the VCT solenoid to stick. Before attempting any component diagnosis or replacement of the VCT solenoid, refer to Powertrain Control and Emissions Diagnosis (PC/ED) pinpoint test HK11 to cycle the affected VCT solenoid 10 times to attempt to clear the debris. For claiming, use causal part 6M280 and applicable labor operations in section 10 of the Service Labor Time Standards (SLTS) Manual.
Associated Products (47)2018 Ford C-Max2018 Ford Edge2018 Ford Escape2018 Ford Explorer2018 Ford F-1502018 Ford F-2502018 Ford F-3502018 Ford F-6502018 Ford F-7502018 Ford Fiesta2018 Ford Flex2018 Ford Focus2018 Ford Fusion2018 Ford Mustang2018 Ford Taurus2018 Ford Transit2018 Lincoln Continental2018 Lincoln MKC2018 Lincoln MKT2018 Lincoln MKX+ 27 moreAssociated Documents - February 14, 2018•Document ID: 10136597Service Bulletin/Repair InstructionsEQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC.
- Mfr Comm. #:
- SSM 47080
- Date Added:
- May 14, 2018
- Manufacturer:
- FORD
Summary2010-2018 various vehicles equipped with SYNC or SYNC 3 may not function when attempting to find or use the Spotify app via AppLink. As of an update released on 1/15/2018 Spotify will no longer be supporting their AppLink integration. No repair attempts should be attempted to correct this concern.
Associated Products (199)2018 Ford Edge2018 Ford Escape2018 Ford Explorer2018 Ford F-1502018 Ford F-2502018 Ford F-3502018 Ford Fiesta2018 Ford Flex2018 Ford Focus2018 Ford Fusion2018 Ford Mustang2018 Ford Taurus2018 Ford Transit2018 Lincoln Continental2018 Lincoln MKC2018 Lincoln MKT2018 Lincoln MKX2018 Lincoln MKZ2017 Ford C-Max2017 Ford Edge+ 179 moreAssociated Documents - January 10, 2018•Document ID: 10140323Service Bulletin/Repair InstructionsEQUIPMENT:ELECTRICAL; EQUIPMENT
- Mfr Comm. #:
- SSM 47009
- Date Added:
- June 11, 2018
- Manufacturer:
- FORD
SummaryThe Accessory (Wireless) Keyless Entry Keypad can only be used with vehicles that are factory built with Remote Keyless Entry (RKE). The master code for the Accessory (Wireless) Keyless Entry Keypad can be retrieved from FMCDealer - Parts and Service - Parts Product Line Information - Keys/Entry Devices - Aftermarket Keyless Entry Keypad Code Access. Access to this site is granted through Dealer Program Enrollment System (DPES) and Dealer Principal, General Manager or Parts and Service Director can authorize users. Once authorized the retrieval process for master code can be obtained. The master code for the Accessory Keyless Entry Keypad cannot be retrieved from the body control module(BCM) with a diagnostic tool.
Associated Products (180)2018 Ford C-Max2018 Ford Edge2018 Ford Escape2018 Ford Explorer2018 Ford F-1502018 Ford Fiesta2018 Ford Flex2018 Ford Focus2018 Ford Fusion2018 Ford Taurus2018 Ford Transit2017 Ford C-Max2017 Ford Edge2017 Ford Escape2017 Ford Expedition2017 Ford Explorer2017 Ford F-1502017 Ford Fiesta2017 Ford Flex2017 Ford Focus+ 160 moreAssociated Documents - January 10, 2018•Document ID: 10138524Service Bulletin/Repair InstructionsEQUIPMENT:ELECTRICAL
- Mfr Comm. #:
- SSM 47009
- Date Added:
- May 29, 2018
- Manufacturer:
- FORD
SummaryThe Accessory (Wireless) Keyless Entry Keypad can only be used with vehicles that are factory built with Remote Keyless Entry (RKE). The master code for the Accessory (Wireless) Keyless Entry Keypad can be retrieved from FMCDealer - Parts and Service - Parts Product Line Information - Keys/Entry Devices - Aftermarket Keyless Entry Keypad Code Access. Access to this site is granted through Dealer Program Enrollment System (DPES) and Dealer Principal, General Manager or Parts and Service Director can authorize users. Once authorized the retrieval process for master code can be obtained. The master code for the Accessory Keyless Entry Keypad cannot be retrieved from the body control module(BCM) with a diagnostic tool.
Associated Products (277)2018 Ford C-Max2018 Ford E-3502018 Ford E-4502018 Ford Edge2018 Ford Escape2018 Ford Explorer2018 Ford F-1502018 Ford F-2502018 Ford F-3502018 Ford F-6502018 Ford F-7502018 Ford Fiesta2018 Ford Flex2018 Ford Focus2018 Ford Fusion2018 Ford Taurus2018 Ford Transit2017 Ford C-Max2017 Ford E-2502017 Ford E-350+ 257 moreAssociated Documents - November 2, 2017•Document ID: 10127405Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM)
- Mfr Comm. #:
- SSM 46900
- Date Added:
- January 29, 2018
- Manufacturer:
- FORD
SummarySome vehicles may exhibit a no start condition with an illuminated malfunction indicator lamp (MIL) and a DTC P161A after PCM replacement. This may be due to the parameter reset procedure not being properly completed. To clear this DTC, use the Ford Integrated Diagnostic System (IDS) service tool or Ford J2534 Diagnostic Software, select - Toolbox - Body - Security - PATS Functions - Parameter Reset. Follow the on-screen instructions to complete the procedure. This procedure will transfer the existing Key ID information between the modules without the need of having 2 programmed PATS keys present. There is no need to program keys when the PCM is going to be replaced. Additional information can be found in the Workshop Manual (WSM), Section 419-01. Missing or lost keys are not warrantable.
Associated Products (202)2018 Ford Edge2018 Ford Escape2018 Ford Explorer2018 Ford F-1502018 Ford Fiesta2018 Ford Flex2018 Ford Focus2018 Ford Fusion2018 Ford Mustang2018 Ford Transit2018 Lincoln Continental2018 Lincoln MKC2018 Lincoln MKT2018 Lincoln MKZ2017 Ford C-Max2017 Ford E-2502017 Ford E-3502017 Ford E-4502017 Ford Edge2017 Ford Escape+ 182 moreAssociated Documents