Ford Bronco Service Bulletins (2022)
281 manufacturer communications on file.
- November 17, 2022•Document ID: 10226937Service Bulletin/Repair InstructionsUNKNOWN OR OTHER; STRUCTURE:BODY:ROOF AND PILLARS
- Mfr Comm. #:
- TSB 22-2436
- Date Added:
- December 2, 2022
- Manufacturer:
- FORD
SummaryThis article supersedes TSB 22-2073 to update the Service Procedure. Some 2021-2022 Bronco vehicles equipped with a hard top may exhibit a loose and/or sagging headliner. This may be due to the factory installation process. To correct the condition, follow the Service Procedure to re-adhere the headliner.
Associated Products (2)Associated Documents - November 15, 2022•Document ID: 10226759Service Bulletin/Repair InstructionsBACK OVER PREVENTION: WARNINGS
- Mfr Comm. #:
- SSM 51201
- Date Added:
- November 30, 2022
- Manufacturer:
- FORD
SummarySome 2021-2022 Bronco vehicles equipped with the 2.3L engine may exhibit a red brake warning lamp and brake system warning message in the instrument panel cluster (IPC) with a diagnostic trouble code (DTC) P050F in the anti-lock brake system (ABS) module. This may be accompanied by an intermittent firm brake pedal after driving for long periods at highway speeds. This may be due to improper sealing of an internal diaphragm within a brake booster vacuum line. To correct this condition, replace the vehicle's vacuum line with the latest version service part number MB3Z-2420-H or later. Refer to Workshop Manual (WSM), Section 206-09 for installation instructions. For claiming, use casual part 2420.
Associated Products (2)Associated Documents - November 10, 2022•Document ID: 10227496Service Bulletin/Repair InstructionsEQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
- Mfr Comm. #:
- 2122OT22PU1010SQ
- Date Added:
- December 8, 2022
- Manufacturer:
- FORD
SummaryPriority Update 22-PU1010-SFT-QL for 2021-2022 Model Year Bronco vehicles is now available. Quality Improvements Include: Improvements to upshift hesitation under certain tip in scenarios, improvements to shift quality, update to prevent misfire codes, updates to the Universal Exhaust Gas Oxygen sensor GHG Parameter identification reporting and Catalyst Monitor Sensor.
Associated Products (2)Associated Documents - November 4, 2022•Document ID: 10227495Service Bulletin/Repair InstructionsEQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
- Mfr Comm. #:
- 2122OTAPU1007DOR
- Date Added:
- December 8, 2022
- Manufacturer:
- FORD
SummaryPriority Update 22-PU1007-DOR-UP for 2021-2022 Model Year Bronco vehicles is now available. Quality Improvements Include: improvement to short window drop, improvement to window bounceback.
Associated Products (2)Associated Documents - November 4, 2022•Document ID: 10226751Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- SSM 51179
- Date Added:
- November 29, 2022
- Manufacturer:
- FORD
SummarySome 2021-2022 Bronco vehicles may experience multiple warning indicators/messages displayed in the instrument panel cluster including but is not limited to Pre-Collision Assist Not Available, Hill Start Assist Not Available and/or Front Camera Malfunction. The vehicle may also have multiple communication fault diagnostic trouble codes (DTC) setting in and/or related to the high speed control area network 2 (HS-CAN2) modules. This may be due to a loose and/or improperly seated connector C210. If the vehicle exhibits the above conditions, access and inspect connector C210 for proper attachment and/or damage and repair as necessary. If this fault persists, refer to Workshop Manual, Section 418-00A and continue with normal diagnostics. For claiming, use causal part 14290 and applicable labor operations in Section 10 of the Service Labor Time Standards (SLTS) Manual.
Associated Products (2)Associated Documents - October 31, 2022•Document ID: 10225437Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:BODY CONTROL MODULE/BCM
- Mfr Comm. #:
- SSM 51166
- Date Added:
- October 31, 2022
- Manufacturer:
- FORD
SummarySome 2021-2022 Bronco vehicles may exhibit a condition of intermittent headlamp operation while the vehicle is OFF and have diagnostic trouble code (DTC) B1533 stored in the body control module (BCM). This may be due to the internal logic within the headlamp switch. To correct this condition, replace the headlamp switch (service base PN: 11654). Refer Workshop Manual, Section 417-01.
Associated Products (2)Associated Documents - October 28, 2022•Document ID: 10225438Service Bulletin/Repair InstructionsSTRUCTURE
- Mfr Comm. #:
- SSM 51164
- Date Added:
- October 31, 2022
- Manufacturer:
- FORD
SummarySome 2021-2022 Bronco vehicles equipped with a soft top roof may experience a broken window buckle on the rear quarter or rear window assemblies. It is no longer required to replace the window assembly to repair this condition. Order the following buckle parts as needed: male side of the buckle (M2DZ-00817-C), which is located on the soft top window assemblies and the female side of the buckle (M2DZ-00817-A), which is located on the soft top cover. To install the male buckle, cut and remove the old plastic clip leaving the fabric loop (on the window assembly) fully intact. The service replacement male buckle includes an open slot that is used to slide the fabric loop through for installation. Sewing is not required for installation.
Associated Products (2)Associated Documents - October 24, 2022•Document ID: 10225509Service Bulletin/Repair InstructionsSTRUCTURE:BODY
- Mfr Comm. #:
- TSB 22-2403
- Date Added:
- November 1, 2022
- Manufacturer:
- FORD
SummarySome 2021-2022 Bronco vehicles may exhibit water leaks located at the A-pillars, overhead console/upfitter switches and/or sun visors. To correct the condition, follow the Service Procedure to diagnose and repair the water leak.
Associated Products (2)Associated Documents - October 18, 2022•Document ID: 10224796Service Bulletin/Repair InstructionsEQUIPMENT
- Mfr Comm. #:
- TSB 22-2274
- Date Added:
- October 25, 2022
- Manufacturer:
- FORD
SummarySome 2021-2022 Bronco vehicles equipped with a soft top may exhibit exterior wear on the sides of the top above the B-pillar. This may be due to contact and rubbing between the soft top frame and fabric. To correct the condition, follow the Service Procedure to replace both right and left deflectors attached to the soft top frame and soft top cover.
Associated Products (2)Associated Documents - October 6, 2022•Document ID: 10222788Service Bulletin/Repair InstructionsSERVICE BRAKES, HYDRAULIC
- Mfr Comm. #:
- SSM 51120
- Date Added:
- October 11, 2022
- Manufacturer:
- FORD
SummarySome Ford and Lincoln vehicles may exhibit noise when the brakes are applied. When diagnosing and repairing brake noise conditions, use the Workshop Manual (WSM) and the appropriate pinpoint test in section 206-00. The brake rotors should only be machined if directed by the WSM because one or more of the following conditions are present on the braking surface: scoring, excessive corrosion/rust or pitting, bluing/discoloration and/or heat spots. For additional information, refer to WSM section 206-00.
Associated Products (124)2022 Ford Bronco2022 Ford Bronco Sport2022 Ford E-1502022 Ford E-2502022 Ford E-3502022 Ford E-4502022 Ford Edge2022 Ford Escape2022 Ford Expedition2022 Ford Explorer2022 Ford F-1502022 Ford F-2502022 Ford F-3502022 Ford F-4502022 Ford F-5502022 Ford F-6502022 Ford F-7502022 Ford GT2022 Ford Maverick2022 Ford Mustang+ 104 moreAssociated Documents - October 4, 2022•Document ID: 10222787Service Bulletin/Repair InstructionsSTRUCTURE:BODY
- Mfr Comm. #:
- SSM 51118
- Date Added:
- October 11, 2022
- Manufacturer:
- FORD
SummarySome 2022 Bronco vehicles built on 01-Feb-2022 and through 10-Mar-2022 may exhibit rusted fasteners on the front fender trail sights (base part number 9920038). This may be due to a lack of protective e-coating applied to the bolts during the manufacturing process. Replacement of the exterior bodyside grab handle assembly will no longer be required. Trail sight fasteners are now available on their own as SPN: M2DZ-18D654-A. This kit comes with two bolts and two nuts, enough to replace all fasteners on one trail sight assembly. These fasteners work on both the left and right trail sights.
Associated Products (2)Associated Documents - September 29, 2022•Document ID: 10222313Service Bulletin/Repair InstructionsBACK OVER PREVENTION: SENSING SYSTEM: CAMERA; BACK OVER PREVENTION
- Mfr Comm. #:
- OTASU3 P2 Bronco
- Date Added:
- October 4, 2022
- Manufacturer:
- FORD
SummarySoftware Update 3 Part 2 for 2021-2022 Model Year Bronco vehicles is now available. Quality Improvements Include: Functionality of rear view camera is improved.
Associated Products (2)Associated Documents - September 20, 2022•Document ID: 10222195Service Bulletin/Repair InstructionsSERVICE BRAKES, AIR:ANTILOCK
- Mfr Comm. #:
- TSB 22-2360
- Date Added:
- September 30, 2022
- Manufacturer:
- FORD
SummaryThis article supersedes TSB 22-2210 to update the expected release date of the revised ABS module software. Customers who neutral (4-wheel flat) tow 2021-2022 Broncos equipped with an electronic brake booster (EBB) may report an inconsistent brake assist when a supplemental braking system has been installed. This may result from supplemental brake system set-up that does not account for the Broncos EBB system entering sleep mode (via the ABS module) after a pre-determined period of time following vehicle shut-down. This functionality is necessary to prevent battery drain. Enhanced software is under development to address this condition when the vehicle enters Neutral Tow mode. The new software is expected to be available in December 2022. Monitor OASIS for updates. Until the software becomes available, customers who meet this criteria may perform the procedures below to address this condition when neutral (4-wheel flat) towing their vehicle.
Associated Products (2)Associated Documents - September 15, 2022•Document ID: 10220384Service Bulletin/Repair InstructionsELECTRONIC STABILITY CONTROL (ESC); SERVICE BRAKES, HYDRAULIC
- Mfr Comm. #:
- TSB 22-2354
- Date Added:
- September 23, 2022
- Manufacturer:
- FORD
SummarySome 2021-2022 Bronco vehicles equipped with a 2.7L or 3.0L EcoBoost engine may exhibit an illuminated anti-lock brake system (ABS) indicator and stability-traction control indicator, and diagnostic trouble code (DTC) C1013:09 stored in the ABS module. This may be due to ABS module software. To correct the condition, follow the Service Procedure to update the ABS module software.
Associated Products (2)Associated Documents - September 15, 2022•Document ID: 10220383Service Bulletin/Repair InstructionsPARKING BRAKE
- Mfr Comm. #:
- TSB 22-2353
- Date Added:
- September 23, 2022
- Manufacturer:
- FORD
SummarySome 2021-2022 Bronco vehicles equipped with a 2.7L or 3.0L EcoBoost engine may exhibit multiple error messages displayed in the IPC followed by automatic engagement of the parking brake immediately after starting the vehicle with the doors removed or after sitting in the vehicle for an extended period of time with the vehicle off. This may be due to the software within the anti-lock brake (ABS) module. To correct the condition, follow the Service Procedure to reprogram the ABS module.
Associated Products (2)Associated Documents - August 31, 2022•Document ID: 10218910Service Bulletin/Repair InstructionsBACK OVER PREVENTION:SOFTWARE
- Mfr Comm. #:
- OTASU3 P1 Bronco
- Date Added:
- September 1, 2022
- Manufacturer:
- FORD
SummarySoftware Update 3 Part 1 for 2021-2022 Model Year Bronco vehicles is now available. Quality Improvements Include: Fix for low power mode rearview camera distortion when the vehicle is shut off and restarted quickly.
Associated Products (2)Associated Documents - August 15, 2022•Document ID: 10218629Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- TSB 22-2325
- Date Added:
- August 23, 2022
- Manufacturer:
- FORD
SummarySome 2021-2022 Bronco vehicles equipped with a stabilizer bar disconnect system may exhibit an illuminated red and/or amber stabilizer bar disconnect indicator and diagnostic trouble code (DTC) C103A:74 stored in the chassis control module (CHCM). This may be due to the software in the CHCM. To correct the condition, follow the Service Procedure to reprogram the CHCM.
Associated Products (2)Associated Documents - August 11, 2022•Document ID: 10217841Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- SSM 51014
- Date Added:
- August 15, 2022
- Manufacturer:
- FORD
SummaryThe electronic parts catalog for the 2021-2022 Bronco equipped with a 2.7L GTDI engine had the incorrect engine oil dipstick assigned. This problem only existed for a few months and has since been corrected. The incorrect dipstick that showed in the catalog was SPN: MB3Z-6750-B/F (EPN: MB3E-6750-BB/BC). The 'MB3Z' dipstick (EPN: 'MB3E') is ONLY designed for use on the 2022 Bronco Raptor which is equipped with a 3.0L GTDI engine. The correct engine oil dipstick for the 2021-2022 Bronco 2.7L GTDI engine is SPN: FT4Z-6750-B/C (EPN: FT4E-6750-BF/BG).
Associated Products (2)Associated Documents - August 2, 2022•Document ID: 10218615Service Bulletin/Repair InstructionsSTRUCTURE
- Mfr Comm. #:
- TSB 22-2306
- Date Added:
- August 23, 2022
- Manufacturer:
- FORD
SummarySome 2022 Bronco vehicles may exhibit a whistle noise below the lower left windshield area at the bottom of the A-pillar. This may be due to a missed body sealer application at the factory. To correct this condition, follow the Service Procedure to reseal the affected body seam.
Associated Products (1)Associated Documents - July 29, 2022•Document ID: 10217028Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- SSM 50975
- Date Added:
- August 2, 2022
- Manufacturer:
- LINCOLN
SummarySome 2017-2022 Ford/Lincoln customers may experience a notification in the FordPassÃÂÃÂÃÂî/LincolnWayÃÂÃÂÃÂî app indicating Vehicle Has Entered Deep Sleep Mode. This occurs when the vehicle has not been started for 14 consecutive days, battery voltage is at/below 9.5 volts or the body control module (BCM) 12 volt battery state of charge (SOC) drops below 50%. A warning may also set if the telematic control unit (TCU) has received an over the air update. The TCU powers down all communication when in this mode and app features are disabled. Manually start the vehicle to wake if from mode. More information is located in the app under: Account > Help > search 'Deep Sleep' in the entry box. If the condition remains, check the BCM 12v SOC. If the SOC does not change after charging the battery or after BMS reset is performed, continue with normal battery and/or BMS sensor diagnostics.
Associated Products (119)2022 Ford Bronco2022 Ford Bronco Sport2022 Ford Edge2022 Ford Expedition2022 Ford Explorer2022 Ford F-1502022 Ford F-2502022 Ford F-3502022 Ford F-4502022 Ford GT2022 Ford Maverick2022 Ford Mustang2022 Ford Mustang Mach-E2022 Ford Ranger2022 Lincoln Aviator2022 Lincoln Corsair2022 Lincoln Nautilus2022 Lincoln Navigator2021 Ford Bronco2021 Ford Bronco Sport+ 99 moreAssociated Documents