Dodge Ram Recalls (1997)

13 recalls on file.

• Recall09E025000May 11, 2009
  EXTERIOR LIGHTING:HEADLIGHTS

  DOPE, INC. IS RECALLING 42,540 COMBINATION CORNER AND BUMPER LAMP ASSEMBLIES OF VARIOUS PART NUMBERS SOLD FOR USE AS AFTERMARKET EQUIPMENT FOR VARIOUS PASSENGER VEHICLES. THESE HEADLAMPS FAIL TO CONFORM TO THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 108, "LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT." THESE LAMPS DO NOT CONTAIN THE REQUIRED AMBER SIDE REFLECTORS.

  Remedy

  DOPE, INC. WILL NOTIFY OWNERS AND OFFER A FULL REFUND FOR THE NONCOMPLIANT COMBINATION LAMPS. THE SAFETY RECALL BEGAN ON JULY 28, 2009. OWNERS MAY CONTACT DOPE, INC. AT 1-626-272-1798.

• Recall09E012000April 7, 2009
  EXTERIOR LIGHTING

  SABERSPORT IS RECALLING 16,270 COMBINATION CORNER AND BUMPER LAMP ASSEMBLIES OF VARIOUS PART NUMBERS SOLD FOR USE AS AFTERMARKET EQUIPMENT FOR VARIOUS PASSENGER VEHICLES. THESE HEADLAMPS FAIL TO CONFORM TO THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 108, "LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT." THESE LAMPS DO NOT CONTAIN THE REQUIRED AMBER SIDE REFLECTORS.

  Remedy

  SABERSPORT WILL NOTIFY OWNERS AND OFFER A FULL REFUND FOR THE NONCOMPLIANT COMBINATION LAMPS. THE SAFETY RECALL BEGAN ON MAY 11, 2009. OWNERS MAY CONTACT SABERSPORT AT 1-909-598-7589.

• Recall08E050000August 11, 2008
  EXTERIOR LIGHTING:HEADLIGHTS

  K2 MOTOR IS RECALLING 1,921 AFTERMARKET HEADLAMPS OF VARIOUS MODELS SOLD FOR USE ON THE ABOVE LISTED VEHICLES. THESE HEADLAMPS ARE MISSING THE AMBER SIDE REFLEX REFLECTOR WHICH FAILS TO CONFORM WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 108, "LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT."

  Remedy

  K2 MOTOR WILL NOTIFY OWNERS AND OFFER A FULL REFUND. THE RECALL BEGAN ON DECEMEBER 17, 2008. OWNERS MAY CONTACT K2 MOTOR AT 1-909-839-2992.

• Recall06E060000June 29, 2006
  EXTERIOR LIGHTING

  CERTAIN AAI MOTORSPORTS COMBINATION LAMPS SOLD AS REPLACEMENT LAMPS FOR USE ON THE ABOVE LIST PASSENGER VEHICLES. COMBINATION LAMPS NOT EQUIPPED WITH AMBER SIDE REFLECTORS FAIL TO CONFORM WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 108, "LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT."

  Remedy

  AAI MOTORSPORTS WILL NOTIFY OWNERS AND REPLACE THE LAMPS FREE OF CHARGE. THE RECALL BEGAN ON AUGUST 1, 2006. OWNERS MAY CONTACT AAI MOTORSPORTS AT 909-923-9188.

• Recall06E024000March 15, 2006
  ENGINE AND ENGINE COOLING

  CERTAIN REPLACEMENT K&N FUEL PERFORMANCE KITS, P/NOS. 57-1509, 57-1511, 57-1511-1, 57-1517, 57-1517-1, 57-1527, AND 57-1530. ALSO, A SMALL PERCENTAGE OF THESE KITS WERE SOLD UNDER THE MOPAR PERFORMANCE PARTS BRAND NAME (P/NOS. P5007069 AND P5007070). ALL KITS WERE MANUFACTURED FROM APRIL 20, 1999, THROUGH SEPTEMBER 23, 2004. THESE ASSEMBLIES WERE MANUFACTURED AS REPLACEMENT EQUIPMENT FOR CERTAIN DODGE PICKUP TRUCKS AND SUVS. A SMALL PIECE OF MATERIAL FROM THE TUBE WALL COULD BE SUCKED INTO THE ENGINE THROTTLE BODY, WHICH COULD CAUSE THE THROTTLE TO BECOME JAMMED IN THE OPEN POSITION.

  Remedy

  K&N WILL PROVIDE OWNERS WITH A FREE REPAIR KIT ALONG WITH REPAIR INSTRUCTIONS. THE RECALL BEGAN ON APRIL 20, 2006.

• Recall02V161000June 14, 2002
  VEHICLE SPEED CONTROL

  ON CERTAIN PICKUP TRUCKS EQUIPPED WITH DIESEL ENGINES ONLY, THE THROTTLE LINKAGE JOINTS CAN CORRODE AND CAUSE THE THROTTLE TO BIND OR STICK.

  Remedy

  DEALERS WILL REPLACE THE ROD ENDS AND BALL STUDS. OWNER NOTIFICATION BEGAN JULY 29, 2002. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT DAIMLERCHRYSLER AT 1-800-853-1403.

• Recall01V153000May 8, 2001
  AIR BAGS

  VEHICLE DESCRIPTION: PICKUP TRUCKS. SOUND DEADENER MATERIAL INSIDE THE STEERING WHEEL COULD BECOME DETACHED FROM THE COVER AND HOUSING. NOTE: THE RAM PICKUP TRUCKS WERE BUILT AT THE WARREN ASSEMBLY PLANT ("S" IN THE 11TH VIN POSITION) FROM MAY 16, 2000 THROUGH OCTOBER 23, 2000; ST. LOUIS NORTH ASSEMBLY PLANT ("J" IN THE 11TH VIN POSITION) FROM MAY 19, 2000 THROUGH OCTOBER 23, 2000; LAGO ALBERTO ASSEMBLY PLANT ("M" IN THE 11TH VIN POSITION) FROM MAY 23, 2000 THROUGH OCTOBER 23, 2000; AND SALTILLO ASSEMBLY PLANT ("G" IN THE 11TH VIN POSITION) FROM MAY 23, 2000 THROUGH OCTOBER 23, 2000. IMPORTANT: VEHICLES THAT HAVE ALREADY HAD THE PROPER CLOCKSPRING INSTALLED, ACCORDING TO WARRANTY RECORDS, HAVE BEEN EXCLUDED FROM THIS RECALL. IN ADDITION, 1997-2000 MODEL YEAR VEHICLES THAT HAVE HAD A SUSPECT REPLACEMENT CLOCKSPRING INSTALLED, ACCORDING TO WARRANTY RECORDS, HAVE BEEN ADDED TO THIS RECALL.

  Remedy

  DEALERS WILL REPLACE THE CLOCKSPRING ASSEMBLY. OWNER NOTIFICATION BEGAN JUNE 18, 2001. ALSO SOME 1997-200 MODEL YEAR VEHICLES THAT, ACCORDING TO WARRANTY RECORDS, HAVE HAD A SUSPECT REPLACEMENT CLOCKSPRING INSTALLED, WILL ALSO BE INCLUDED IN THIS CAMPAIGN. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT DAIMLERCHRYSLER AT 1-800-853-1403.

• Recall01V040000February 12, 2001
  LATCHES/LOCKS/LINKAGES:HOOD:LATCH

  ON CERTAIN PICKUP TRUCKS ORIGINALLY SOLD IN OR CURRENTLY REGISTERED IN THE FOLLOWING "SALT BELT" STATES: MAINE, NEW HAMPSHIRE, VERMONT, MASSACHUSETTS, RHODE ISLAND, CONNECTICUT, NEW YORK, NEW JERSEY, PENNSYLVANIA, DELAWARE, MARYLAND, THE DISTRICT OF COLUMBIA, WEST VIRGINIA, OHIO, INDIANA, MICHIGAN, ILLINOIS, WISCONSIN, MINNESOTA, IOWA, AND MISSOURI. CORROSION OF THE RETURN SPRING ON THE HOOD SECONDARY LATCH COULD CAUSE THE MECHANISM TO BIND IN THE "RELEASE POSITION."

  Remedy

  DEALERS WILL REPLACE THE SECONDARY HOOD LATCH. OWNER NOTIFICATION BEGAN SEPTEMBER 17, 2001. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT DAIMLERCHRYSLER AT 1-800-853-1403.

• Recall99V115000May 6, 1999
  POWER TRAIN:CLUTCH ASSEMBLY

  VEHICLE DESCRIPTION: PICKUP TRUCKS EQUIPPED WITH MANUAL TRANSMISSION, V10 ENGINES AND FOUR-WHEEL-DRIVE TRANSFER CASES. UNDER SUSTAINED MAXIMUM RATED VEHICLE LOAD, WHILE DRIVING UP A STEEP GRADE IN FOUR-WHEEL-DRIVE LOW RANGE IN HOT AMBIENT CONDITIONS, THE LOCAL EXHAUST TEMPERATURE PROXIMATE TO THE HYDRAULIC CLUTCH LINE CAN GENERATE LINE TEMPERATURES THAT EXCEED THE TEMPERATURE LIMIT OF THE CLUTCH LINE MATERIAL. IF THIS CONDITION OCCURS AND THE CLUTCH IS DEPRESSED, THE LINE COULD RUPTURE.

  Remedy

  DEALERS WILL REPLACE THE HYDRAULIC CLUTCH ASSEMBLY.

• Recall99V023000February 5, 1999
  AIR BAGS:FRONTAL

  VEHICLE DESCRIPTION: VAN AND WAGON MODEL PASSENGER VEHICLES. IF WATER/ROAD SALT GETS ON THE INTERIOR FLOOR OF THE VEHICLE IN THE PROXIMITY OF THE AIR BAG ELECTRONIC CONTROL MODULE (AECM), THE AECM CAN CORRODE. THE RESULTING CORROSION CAN CAUSE THE DRIVER SIDE AIR BAG TO DEPLOY INADVERTENTLY.

  Remedy

  DEALERS WIL REPLACE THE AECM WITH AN AECM THAT IS SEALED FROM MOISTURE INTRUSION.

• Recall99V024000February 5, 1999
  EXTERIOR LIGHTING:HEADLIGHTS:SWITCH

  VEHICLE DESCRIPTION: MODEL 3500 LIGHT DUTY TRUCKS ONLY. OPERATION OF THE HEADLAMPS OVER AN EXTENDED PERIOD OF TIME CAN RESULT IN HEADLAMP SWITCH FAILURE, CAUSING THE HEADLAMPS OR PARK LAMPS TO GO OUT.

  Remedy

  DEALERS WILL REPLACE THE HEADLAMP SWITCH INCLUDING A RELAY IN THE PARK LAMP WIRING CIRCUIT.

• Recall97V126000August 18, 1997
  UNKNOWN OR OTHER

  VEHICLE DESCRIPTION: LIGHT DUTY TRUCKS EQUIPPED WITH DIESEL ENGINES. THE EXHAUST PIPE CONTACTS OR IS IN CLOSE PROXIMITY TO THE OUTER DASH PANEL SILENCER PAD.

  Remedy

  DEALERS WILL REMOVE THE DASH SILENCER PAD ADJACENT TO THE EXHAUST PIPE AND REPLACE THIS PAD WITH A THERMAL HEAT SHIELD ON THE EXHAUST PIPE.

• Recall97V084000May 5, 1997
  POWER TRAIN:AUTOMATIC TRANSMISSION:COOLING UNIT AND LINES

  UNDER CERTAIN HIGH LOAD OPERATING CONDITIONS, THE TRANSMISSION FLUID TEMPERATURE CAN EXCEED THE MELTING POINT OF THE MATERIAL USED IN THE CONNECTOR TO RETAIN THE FLUID LINE TO THE TRANSMISSION.

  Remedy

  DEALERS WILL REPLACE THE HIGH TEMPERATURE SIDE OF THE TRANSMISSION FLUID COOLER LINE CONNECTOR FITTINGS WITH CONNECTORS THAT INCORPORATE A STAINLESS STEEL RETAINER.