CAN-AM Spyder Service Bulletins (2014)
39 manufacturer communications on file.
- October 3, 2014•Document ID: 10088501Service Bulletin/Repair InstructionsFUEL SYSTEM, GASOLINE:STORAGE:TANK ASSEMBLY:FILLER PIPE AND CAP
- Mfr Comm. #:
- 2014-7
- Date Added:
- January 12, 2017
- Manufacturer:
- CAN-AM
SummaryARTICLE DISCUSSING WARRANTY BULLETIN 2014-7 FOR UNREGISTERED VEHICLE ONLY ADDRESSING THE PROBLEM OF THE GAS CAP THAT MAY BE IMPOSSIBLE TO REMOVE. THE RATCHING MECHANICAL INSIDE DE GAS CAP CAN FAIL. THE SOLUTION IS TO REPLACE THE GAS CAP DURING PREDELIVERY INSPECTION.
Associated Products (1)Associated Documents - October 3, 2014•Document ID: 10088486Service Bulletin/Repair InstructionsFUEL SYSTEM, GASOLINE:STORAGE:TANK ASSEMBLY:FILLER PIPE AND CAP
- Mfr Comm. #:
- 2014-7
- Date Added:
- January 12, 2017
- Manufacturer:
- CAN-AM
SummaryARTICLE DISCUSSING WARRANTY BULLETIN 2014-7 FOR UNREGISTERED VEHICLE ONLY ADDRESSING THE PROBLEM OF THE GAS CAP THAT MAY BE IMPOSSIBLE TO REMOVE. THE RATCHING MECHANICAL INSIDE DE GAS CAP CAN FAIL. THE SOLUTION IS TO REPLACE THE GAS CAP DURING PREDELIVERY INSPECTION.
Associated Products (1)Associated Documents - September 5, 2014•Document ID: 10088484Service Bulletin/Repair InstructionsVISIBILITY:WINDSHIELD
- Mfr Comm. #:
- ARTICLE 64634
- Date Added:
- January 12, 2017
- Manufacturer:
- CAN-AM
SummaryTECHNICAL SERVICE TIP (TST) THAT ADDRESSES THE ISSUE THAT SOME CUSTOMERS HAVE REPORTED THAT WITH THE INSTALLATION OF THE HIGH WINDSHIELD FOR PAC THAT IN SOME CERTAIN DRIVING CONDITIONS THE WINDSHIELD DROPS. THE SOLUTION IS THE INSTALLATION OF THE HIGH WINDSHIELD REFURBISH KIT.
Associated Products (1)Associated Documents - July 18, 2014•Document ID: 10088483Service Bulletin/Repair InstructionsVISIBILITY:WINDSHIELD
- Mfr Comm. #:
- 2014-6
- Date Added:
- January 12, 2017
- Manufacturer:
- CAN-AM
SummaryWARRANTY BULLETIN 2014-6 CONCERNING THE PROBLEM OF ONE OR MORE OF THE SCREWS HOLDING THE WINDSHIELD ASSEMBLY MAY BRAKE. THE SOLUTION IS TO REPLACE THE WINDSHIELD ASSEMBLY SLEEVES AND SCREWS AS DESCRIBED IN THE PROCEDURE.
Associated Products (1)Associated Documents - July 18, 2014•Document ID: 10088482Service Bulletin/Repair InstructionsFUEL SYSTEM, GASOLINE:STORAGE:TANK ASSEMBLY:FILLER PIPE AND CAP; VISIBILITY:WINDSHIELD
- Mfr Comm. #:
- BULLETIN 2014-5
- Date Added:
- January 12, 2017
- Manufacturer:
- CAN-AM
SummaryWARRANTY BULLETIN 2014-5 THAT ADDRESSED THE FOLLOWING PROBLEMS: A) ONE OR MORE OF THE SCREWS HOLDING THE WINDSHIELD ASSEMBLY MAY BRAKE. THE SOLUTION IS TO REPLACE THE WINDSHIELD ASSEMBLY SLEEVES AND SCREWS AS DESCRIBED IN THE PROCEDURE; B) THE RATCHETING MECHANISM INSIDE THE GAS CAP CAN FAIL. THE SOLUTION IS TO REPLACE THE GAS CAP.
Associated Products (1)Associated Documents - June 4, 2014•Document ID: 10084725Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- BULLETIN 2014-3
- Date Added:
- November 23, 2016
- Manufacturer:
- CAN-AM
SummaryWARRANTY PAC BULLETIN 2014-3 ADDRESSING A POSSIBLE LIMP HOME MODE TRIGGERED BY CB WHILE TRANSMITTING DUE TO INCORRECTLY SHIELDED CAN WIRES IN ENTERTAINMENT AND CB HARNESS. BRP SUGGEST TO RETURN ALL AFFECTED KITS IF IN DEALER'S INVENTORY OR REPLACE ENTERTAINMENT HARNESS AND CB COMMUNICATION KIT IF IT IS INSTALLED ON VEHICLES AND ONLY ON VEHICLES THAT EXPERIENCE THE PROBLEM.
Associated Products (2)Associated Documents - May 29, 2014•Document ID: 10084724Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:IGNITION:SWITCH; EXTERIOR LIGHTING:TURN SIGNAL
- Mfr Comm. #:
- 2014-2 -RV2
- Date Added:
- November 23, 2016
- Manufacturer:
- CAN-AM
SummaryREVISION 2 OF WARRANTY BULLETIN 2014-2 ADRESSING TWO PROBLEMS: A) POSSIBLE DEFFECTIVE IGNITION SWITCH. THE FAILURE MAY INCLUDE UNABLE TO TURN KEY IN IGNITION SWITCH OR UNABLE TO REMOVE KEY FROM IGNITION SWITCH. NEW PROCEDURE FO THE REPLACEMENT OF THE IGNITION SWITCH IS DESCRIBED; B) FAST FLASHER BLINK RATE. THE MULTIFUNCTION GAUGE CLUSTER REQUIRES RE-CALIBRATION.
Associated Products (1)Associated Documents - May 29, 2014•Document ID: 10055933Service Bulletin/Repair InstructionsEXTERIOR LIGHTING:TURN SIGNAL:FLASHER UNIT; ELECTRICAL SYSTEM:IGNITION:SWITCH
- Mfr Comm. #:
- WB-2014-2
- Date Added:
- August 6, 2014
- Manufacturer:
- CAN-AM
SummaryBRP MC: MOTORCYCLE EXPERIENCING A DEFECTIVE IGNITION KEY, RATE OF FAST FLASHER BLINK, THE COVER OF SEAT AND/OR FRONT STORAGE FAILS TO OPEN. *PE
Associated Products (1)Associated Documents - April 12, 2014•Document ID: 10186274Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- D109338
- Date Added:
- February 1, 2021
- Manufacturer:
- CAN-AM
SummaryTrailer module may fail.
Associated Products (13)Associated Documents - March 31, 2014•Document ID: 10083537Service Bulletin/Repair InstructionsEXTERIOR LIGHTING:TURN SIGNAL:FLASHER UNIT
- Mfr Comm. #:
- ARTICLE 66269
- Date Added:
- October 26, 2016
- Manufacturer:
- CAN-AM
SummaryTECHNICAL SERVICE TIP (TST): ON 2014 MODELS ONLY THE FLASHER BLINK MAY BE FASTER THAN NORMAL FOR A CERTAIN TIME. THIS SITUATION IS CAUSED BY A CALIBRATION ISSUE THAT IS EASY TO RESOLVE. THE SOLUTION IS THE RECALIBRATE THE CLUSTER FOLLOWING THE STEPS MENTIONED IN THE ARTICLE.
Associated Products (1)Associated Documents - March 31, 2014•Document ID: 10083533Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:IGNITION:SWITCH
- Mfr Comm. #:
- 77572
- Date Added:
- October 26, 2016
- Manufacturer:
- CAN-AM
SummaryTECHNICAL SERVICE TIP (TST): 2014 ROADSTERS MAY HAVE A PROBLEM WITH THE IGNITION SWITCH: 1) THE ONES DETAILLED IN THE WARRANTY BULLETIN 2014-2 (UNABLE TO TURN KEY IN IGNITION SWITCH OR UNABLE TO REMOVE KEY FROM IGNITION SWITCH); OR 2) OTHERS SUCH AS UNABLE TO OPEN SEAT, UNABLE TO OPEN FRONT CARGO AND POSITION LIGHTS INTERMITTENTLY TURNING OFF WHEN MOVING THE KEY IN THE IGNITION SWITCH.
Associated Products (1)Associated Documents - March 31, 2014•Document ID: 10118136Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:STARTER ASSEMBLY:SOLENOID
- Mfr Comm. #:
- Article 77592
- Date Added:
- September 27, 2017
- Manufacturer:
- CAN-AM
SummaryArticle: The bracket retaining the clutch and line pressure solenoids may be incorrectly installed on certains models. This condition will cause the clutch to slip under load when the engine has reached the normal operating temperature. The solution is to remove the clutch cover and reinstall correctly the retaining bracket.
Associated Products (1)Associated Documents - March 27, 2014•Document ID: 10118137Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:IGNITION:SWITCH
- Mfr Comm. #:
- Bulletin 2014-2
- Date Added:
- September 27, 2017
- Manufacturer:
- CAN-AM
SummaryWarranty bulletin 2014-2 adressing two problems: a) Possible deffective ignition switch. The failure may include unable to turn key in ignition switch or unable to remove key from ignition switch. The solution is to replace the ignition switch if the number of the key tag is found on the list; b) Fast flasher blink rate. The multifunction gauge cluster requires re-calibration.
Associated Products (1)Associated Documents - March 24, 2014•Document ID: 10118135Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:SOFTWARE
- Mfr Comm. #:
- Article 77579
- Date Added:
- September 27, 2017
- Manufacturer:
- CAN-AM
SummaryTechnical Service Tip (TST): BRP has received reports of SE6 1330 engines stalling when being shifted after being restarted. This situation is caused by a software issue.
Associated Products (1)Associated Documents - January 31, 2014•Document ID: 10185872Service Bulletin/Repair InstructionsEQUIPMENT
- Mfr Comm. #:
- E01-10-14
- Date Added:
- January 25, 2021
- Manufacturer:
- CAN-AM
SummarySpecial repair needed at PDI
Associated Products (1)Associated Documents - January 23, 2014•Document ID: 10185881Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; ENGINE AND ENGINE COOLING:ENGINE:ENGINE CONTROL MODULE (ECU/ECM):SOFTWARE
- Mfr Comm. #:
- A71523
- Date Added:
- January 25, 2021
- Manufacturer:
- CAN-AM
SummaryFront fuse box covers replacement. Update ECM software.
Associated Products (1)Associated Documents - October 22, 2013•Document ID: 10191376Service Bulletin/Repair InstructionsEQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC.
- Mfr Comm. #:
- Article Radio 10
- Date Added:
- May 3, 2021
- Manufacturer:
- CAN-AM
SummaryIf a customer wants to change the radio pre-set channel number and is unable to do so, here is the reason this is happening.
Associated Products (14)Associated Documents - August 13, 2013•Document ID: 10057374Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 000030994
- Date Added:
- May 22, 2015
- Manufacturer:
- CAN-AM
SummaryBRP ROADSTER : COMPLAINT REGARDING VEHICLE ACCLERATION/ SURGE ON DOWN SHIFT, WHICH MAY BE CAUSED BY THE CLUTCH PACK NOT TOTALLY DISENGAGING. *LJ
Associated Products (1)Associated Documents - February 27, 2012•Document ID: 10185854Service Bulletin/Repair InstructionsFUEL SYSTEM, OTHER:KINETIC:CLUTCH
- Mfr Comm. #:
- PRE-02-27-2012
- Date Added:
- January 25, 2021
- Manufacturer:
- CAN-AM
SummaryCentrifungal clutch vibration.
Associated Products (14)Associated Documents