BMW R 1300 GS Adventure Service Bulletins (2025)
18 manufacturer communications on file.
- June 17, 2026•Document ID: 11034484Service Bulletin/Repair InstructionsSUSPENSION
- Mfr Comm. #:
- MC330226
- Date Added:
- July 3, 2026
- Manufacturer:
- BMW
SummaryIn order to help with technician diagnostic time and help with a speedy repair. It has been found that the AIRin the hydraulic suspension system may arise.
Associated Products (2)Associated Documents - February 18, 2026•Document ID: 11028991Service CampaignENGINE
- Mfr Comm. #:
- MC110125
- Date Added:
- February 24, 2026
- Manufacturer:
- BMW
SummaryAfter a quality inspection it was found that due to improper machining, the right-side chain tensioner screw plug doesn’t meet the specifications over the service life of the motorcycle. As a result, over increased mileage accrued noise and engine damage may occur.
Associated Products (5)Associated Documents - February 10, 2026•Document ID: 11029027OtherSTRUCTURE:BODY
- Mfr Comm. #:
- MCAS1626
- Date Added:
- February 25, 2026
- Manufacturer:
- BMW
SummaryReturn Cockpit Fairing, Right
Associated Products (1)Associated Documents - January 23, 2026•Document ID: 11028202OtherPOWER TRAIN
- Mfr Comm. #:
- MCAS0926
- Date Added:
- February 4, 2026
- Manufacturer:
- BMW
SummaryReturn Clutch Cover
Associated Products (2)Associated Documents - December 30, 2025•Document ID: 11026996Service CampaignENGINE
- Mfr Comm. #:
- MC110125
- Date Added:
- January 5, 2026
- Manufacturer:
- BMW
SummaryAfter a quality inspection it was found that due to improper machining, the right-side chain tensioner screwplug doesn’t meet the specifications over the service life of the motorcycle. As a result, over increased mileage accrued noise and engine damage may occur.
Associated Products (5)Associated Documents - November 20, 2025•Document ID: 11025690Service Bulletin/Repair InstructionsUNKNOWN OR OTHER
- Mfr Comm. #:
- MC770525
- Date Added:
- November 25, 2025
- Manufacturer:
- BMW
SummaryThere is perceivable play between the case and the case holder and can be annoying to customers. The aluminum cases of the R1300GS are hooked into the case holders that are mounted on the vehicle and are locked in place with a lock. In contrast to the aluminum case of the R1250GS, they are not braced together with the luggage rack. This hook-in concept makes it easy to mount and remove the cases from the vehicle. This ensures that the cases can be securely locked to the vehicle in all possible tolerance positions.
Associated Products (1)Associated Documents - October 24, 2025•Document ID: 11024719Service CampaignPOWER TRAIN
- Mfr Comm. #:
- MC230125
- Date Added:
- November 3, 2025
- Manufacturer:
- BMW
SummaryIn affected vehicles, an incorrect bolt may be installed in the clutch release lever of the ASA (AutomatedShift Assistant, SA 022A) transmission. This may result in premature wear to the bolt. At an advanced stage,this wear typically leads to noise concerns and may also cause clutch malfunctions. The affected vehicles have been placed under the delivery stop STOP230007 associated with campaign number 0023220000, which will be lifted upon completion of this technical campaign.
Associated Products (2)Associated Documents - October 14, 2025•Document ID: 11024738OtherPOWER TRAIN
- Mfr Comm. #:
- MCAS7825
- Date Added:
- November 3, 2025
- Manufacturer:
- BMW
SummaryPropeller Shaft Return
Associated Products (4)Associated Documents - August 14, 2025•Document ID: 11022848Service Bulletin/Repair InstructionsSTRUCTURE:BODY; SUSPENSION
- Mfr Comm. #:
- MC330524
- Date Added:
- September 5, 2025
- Manufacturer:
- BMW
SummaryIn some R 1300 model motorcycles, it has been detected that the rear wheel swingarm has play in theaxial direction. The mounting of the swingarm to the frame is comparable to the F and S model motorcycles. During the mounting of the swingarm axle, this creates different tensions from motorcycle to motorcycle pulling the frame together. Resulting in little to no axial play allowing axial movement on the swingarm axle.
Associated Products (4)Associated Documents - July 30, 2025•Document ID: 11021114Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- MC460224
- Date Added:
- July 31, 2025
- Manufacturer:
- BMW
SummaryCalibration of one or both ride height sensors fail due to the ride height sensor/s are not positioned correctly.
Associated Products (2)Associated Documents - July 30, 2025•Document ID: 11021113Service Bulletin/Repair InstructionsPOWER TRAIN
- Mfr Comm. #:
- MC330524
- Date Added:
- July 31, 2025
- Manufacturer:
- BMW
SummaryIn some R 1300 model motorcycles, it has been detected that the rear wheel swingarm has play in theaxial direction. The mounting of the swingarm to the frame is comparable to the F and S model motorcycles. During the mounting of the swingarm axle, this creates different tensions from motorcycle to motorcycle pulling theframe together. Resulting in little to no axial play allowing axial movement on the swingarm axle.
Associated Products (6)Associated Documents - April 23, 2025•Document ID: 11017287Service Bulletin/Repair InstructionsSERVICE BRAKES
- Mfr Comm. #:
- MC340125
- Date Added:
- April 29, 2025
- Manufacturer:
- BMW
SummaryOne or both of the front brake caliper/s are leaking after sitting idle for long periods of time. They only leak atlow internal pressures.
Associated Products (2)Associated Documents - April 11, 2025•Document ID: 11017106Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- MC610625
- Date Added:
- April 18, 2025
- Manufacturer:
- BMW
SummaryThe comfort flashing function is deactivated in the instrument cluster settings, the function reactivatesautomatically after a few seconds. This means that comfort flashing cannot be deactivated. Due to a software error in I-level X001-25-03-505.
Associated Products (2)Associated Documents - April 3, 2025•Document ID: 11017104Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; STEERING
- Mfr Comm. #:
- MC510125
- Date Added:
- April 18, 2025
- Manufacturer:
- BMW
SummaryWhen the vehicle key is recognized; however, the steering lock will not unlock and the keyless ride controlunit hums briefly. Continued analysis is required.
Associated Products (3)Associated Documents - March 12, 2025•Document ID: 11015864OtherELECTRICAL SYSTEM
- Mfr Comm. #:
- MCAS2525
- Date Added:
- March 24, 2025
- Manufacturer:
- BMW
SummaryControl Module Return
Associated Products (2)Associated Documents - March 6, 2025•Document ID: 11015548Service Bulletin/Repair InstructionsSUSPENSION
- Mfr Comm. #:
- MC330124
- Date Added:
- March 11, 2025
- Manufacturer:
- BMW
SummaryThe Dynamic Suspension Adjustment (DSA) chassis cannot be calibrated . Various causes can lead to thisfault.
Associated Products (2)Associated Documents - February 21, 2025•Document ID: 11014674Service Bulletin/Repair InstructionsUNKNOWN OR OTHER
- Mfr Comm. #:
- B770225
- Date Added:
- March 3, 2025
- Manufacturer:
- BMW
SummaryThere are stains on the surface of the luggage caused by the heat treating and anodizing surfaces.
Associated Products (1)Associated Documents - January 29, 2025•Document ID: 11013432Service CampaignSERVICE BRAKES
- Mfr Comm. #:
- MC320224
- Date Added:
- February 3, 2025
- Manufacturer:
- BMW
SummaryThe Blow-By clearance tolerance at the handbrake lever fitting may be below than what is stated by the manufacturer, which can lead to slight braking pressure in the front brakes under certain settings (e.g. warm outside temp to warm breaks, etc…) with a slow release of pressure over time. Several conditions must be achieved for this to occur: 1.The FCW (Front Collision Warning) rider assistant system must be activated. 2.The FCW must trigger a warning based on the traffic condition. Moderate pressure must build up in the brake system during this warning trigger. 3.The handbrake lever fitting’s blow by clearance must be below the tolerance level specified by the manufacturer. In some instances, the brake pressure built up by the FCW will not release immediately because the sealing lip in the piston can become blocked by the insufficient blow by clearance and will slowly release the pressure over time. In the cases above, it is always the result of an incorrectly adjusted handbrake lever fitting as the FCW assistance system works correctly and reliably. Only in isolated cases the manufacturer had delivered handbrake lever fittings in which the blow by clearance is set too low. NOTE: The Standard setting of the handbrake lever fitting piston blow by clearance MUST NOT be adjusted, not even to adjust free travel or for assembly of aftermarket accessory levers!!!!! The seal on the locking screw is to prevent manipulation and MUST NOT BE BROKEN. Examples of untampered and tampers fittings are below with an example of the location.
Associated Products (2)Associated Documents