BMW M760i Service Bulletins (2017)
360 manufacturer communications on file.
- January 1, 2017•Document ID: 10150983Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:SOFTWARE
- Mfr Comm. #:
- B840117
- Date Added:
- December 10, 2018
- Manufacturer:
- BMW
Summary?E-Call system activates on its own without customer interaction. Software error in Telematic Control unit.
Associated Products (2)Associated Documents - January 1, 2017•Document ID: 10150982Service Bulletin/Repair InstructionsLANE DEPARTURE: SENSING SYSTEM: CAMERA; ELECTRICAL SYSTEM:SOFTWARE
- Mfr Comm. #:
- B662616
- Date Added:
- December 10, 2018
- Manufacturer:
- BMW
SummaryLOSS OF DRIVERS ASSISTANCE FUNCTION AFTER PROGRAMMING. An enabling code for various KAFAS (Camera Assisted Drivers Assistance System) functions is not present in control unit software.
Associated Products (2)Associated Documents - January 1, 2017•Document ID: 10150981Service Bulletin/Repair InstructionsVISIBILITY; LANE DEPARTURE
- Mfr Comm. #:
- B662416
- Date Added:
- December 10, 2018
- Manufacturer:
- BMW
SummaryIncorrect detection of Blind Spot Warning sensor (HC2-sensor). The radar waves are incorrectly scattered.
Associated Products (2)Associated Documents - January 1, 2017•Document ID: 10150980Service Bulletin/Repair InstructionsELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL; ELECTRICAL SYSTEM:SOFTWARE; FUEL SYSTEM, OTHER:STORAGE:FUEL GAUGE SYSTEM
- Mfr Comm. #:
- B621716
- Date Added:
- December 10, 2018
- Manufacturer:
- BMW
Summary?FUEL GAUGE AND RANGE DISPLAY FAILURE.
Associated Products (2)Associated Documents - June 1, 2016•Document ID: 10151379Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- B661216
- Date Added:
- December 10, 2018
- Manufacturer:
- BMW
SummaryDRIVER PROFILE NOT SET PROPERLY. Driver settings revert to an alternate driver profile upon entry into vehicle. Body Domain Controller (BDC) software error
Associated Products (2)Associated Documents - May 1, 2016•Document ID: 10151327Service Bulletin/Repair InstructionsEXTERIOR LIGHTING:HEADLIGHTS
- Mfr Comm. #:
- B630316
- Date Added:
- December 10, 2018
- Manufacturer:
- BMW
Summary"G12 Faulty LED Headlight. One of the following situations exists: A. One of the following lights fail to operate (with no CCM and no fault codes in either FLM (Front Light Module): The cornering light The inner low-beam headlight The side marker light B. The headlights cannot be turned on and the following additional conditions may exist: CCM (Check Control Message) of ""The lighting system at the front (left and / or right) is faulty"" The battery may be discharged. One or more fault code(s) may be present in FLM (left right side(s)): - 8059BA Internal control unit fault / left - 43012E Controller cannot be switched off / left - 43010C Watchdog has triggered a reset / left - 805B34 Internal control unit fault / right - 44012E Controller cannot be switched off / right - 44010C Watchdog has triggered a reset / right Software error in FLM."
Associated Products (2)Associated Documents - May 1, 2016•Document ID: 10151326Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL
- Mfr Comm. #:
- B620916
- Date Added:
- December 10, 2018
- Manufacturer:
- BMW
SummaryInstrument Cluster Clock Loses Time. The time displayed in the KOMBI (instrument cluster) may lose a few minutes each week Internal KOMBI calculation error.
Associated Products (2)Associated Documents - May 1, 2016•Document ID: 10151320Service Bulletin/Repair InstructionsVISIBILITY:WINDSHIELD WIPER/WASHER
- Mfr Comm. #:
- B610716
- Date Added:
- December 10, 2018
- Manufacturer:
- BMW
SummaryAn Erroneous CCM is displayed for Low Washer Fluid Level. At low outside ambient temperatures (approximately 18 F or lower), an erroneous CCM (Check Control Message) is displayed for Low Washer Fluid. The washer fluid reservoir is full. Incorrect coding for washer fluid level detection.
Associated Products (2)Associated Documents - May 1, 2016•Document ID: 10151305Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING; ENGINE
- Mfr Comm. #:
- B121316
- Date Added:
- December 10, 2018
- Manufacturer:
- BMW
SummaryN63R Map Thermostat Faults. The Service Engine Soon light is on with one or more of the following fault codes: 1D2009 - characteristic map thermostat: clamped closed 10921B - characteristic map thermostat, stroke sensor: short circuit to ground 1D2008 - characteristic map thermostat: clamped open 1D2401 - characteristic map thermostat, actuation: short circuit to B+ 10921A - characteristic map thermostat, stroke sensor: short circuit to B+ 1FB201 - Check Control message (ID 257): Engine too hot! Drive gently 1FB301 - Check Control message (ID 39): Engine overheated. Stop carefully 1D2404 - characteristic map thermostat, actuation: line disconnection 1D2402 - characteristic map thermostat, actuation: short circuit to ground In severe cases there may be no communication with the DME (MASTER DME - control unit description file DME8FF_R) Coolant is leaking past the map thermostat electrical connector.
Associated Products (2)Associated Documents - May 1, 2016•Document ID: 10151299Service Bulletin/Repair InstructionsENGINE
- Mfr Comm. #:
- B110416
- Date Added:
- December 10, 2018
- Manufacturer:
- BMW
SummaryN63R Engine. Replace the Wastegate Actuators and Program the Vehicle This Service Information bulletin supersedes SI B111 04 16 dated May 2016.. An internal manufacturing defect in the electric wastegate actuator can lead to a reduction in the engine power, engine malfunction warning illuminated and various faults stored the DME for wastegate operation.
Associated Products (2)Associated Documents - April 1, 2016•Document ID: 10151270Service Bulletin/Repair InstructionsEQUIPMENT:APPLIANCE:AIR CONDITIONER; ELECTRICAL SYSTEM:SOFTWARE
- Mfr Comm. #:
- B640616
- Date Added:
- December 10, 2018
- Manufacturer:
- BMW
Summary"Automatic Rear A/C System Resets to Default at Engine Start. The temperature setting of the automatic rear air-conditioning system is always reset to the ""DEFAULT"" value after the engine starts or after a terminal change. Software in the control panel of the automatic rear air-conditioning system"
Associated Products (2)Associated Documents - April 1, 2016•Document ID: 10151261Service Bulletin/Repair InstructionsSTEERING
- Mfr Comm. #:
- B320516
- Date Added:
- December 10, 2018
- Manufacturer:
- BMW
SummaryErroneous Electric Power Steering (EPS) Fault. INFORMATION This is an erroneous fault! After a terminal status change, the fault disappears until the next diagnostic session. Do not replace any parts as this will not provide a resolution. This erroneous fault will be eliminated with ISTA/P 3.59 (I-Level S15A 16-07-501). WARRANTY INFORMATION Not applicable.
Associated Products (2)Associated Documents - March 1, 2016•Document ID: 10151207Service Bulletin/Repair InstructionsEQUIPMENT:ELECTRICAL
- Mfr Comm. #:
- B840815
- Date Added:
- December 10, 2018
- Manufacturer:
- BMW
Summary"During the QC1 the BMW Assist Test Call Fails. After the transport mode is deleted (during the QC1), a BMW Assist (SOS) test call is made by pressing the SOS/ E-Call button. However, the call only connects via voice (no data is transmitted). The operator indicates that a crash call has been sent. ATM fault code ""B7F348 - Provisioning without signature OTA"" is stored. The provisioning of the ATM (Advanced Telematics Module) has failed."
Associated Products (52)Associated Documents - March 1, 2016•Document ID: 10151205Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- B660616
- Date Added:
- December 10, 2018
- Manufacturer:
- BMW
Summary"Error Patterns with BMW Display Key. One or more of the following error patterns occurred while using the BMW display key; these error patterns only occur with the BMW display key: Comfort Access does not work while opening and closing. The BMW display key cannot be charged (USB cable or wirelessly). The BMW display key screen is locked and cannot display vehicle information. Sporadically, the engine will not start with BMW display key and one of the following CCM ""Check Control messages"" is displayed: Remote control, remote control not present or faulty. Not possible to start engine. Hold the remote near the steering column and then press the START-STOP button. see ""Owner's Handbook"". NOTE: The BMW display key continues to be able to lock/unlock the vehicle with the buttons, and/or the engine started, by emergency detection procedure (placing the BMW display key on the marked area of the steering column). Data lost during the communication between the BMW display key and FBD receiver"
Associated Products (2)Associated Documents - March 1, 2016•Document ID: 10151204Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- B660516
- Date Added:
- December 10, 2018
- Manufacturer:
- BMW
SummaryBMW Display Key Battery is Completely Discharged at Vehicle Delivery. The battery of the BMW display key is completely discharged during transport and is almost empty at the time of vehicle delivery. Extended vehicle storage.
Associated Products (2)Associated Documents - March 1, 2016•Document ID: 10151202Service Bulletin/Repair InstructionsLANE DEPARTURE: SENSING SYSTEM: CAMERA
- Mfr Comm. #:
- B660316
- Date Added:
- December 10, 2018
- Manufacturer:
- BMW
Summary"Driver Assistance System Limited Support CCM. A Check Control Message (CCM) is displayed advising the customer that ""Support provided by the driver assistance system is limited"". You can continue to drive. One or more of the following faults codes may be stored: KAFAS Control unit: 0x800A01 - Camera field of view disturbed by weather conditions 0x800ABE - Camera blindness SAS control unit: 0xD1AD88 - Signal fault invalid Software error in the KAFAS control unit"
Associated Products (2)Associated Documents - March 1, 2016•Document ID: 10151200Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; EQUIPMENT
- Mfr Comm. #:
- B651316
- Date Added:
- December 10, 2018
- Manufacturer:
- BMW
Summary"NBT-EVO Head Unit Cannot Be Swapped Between Vehicles for Testing. If an NBT-EVO head unit is swapped into a different vehicle it will enter a locked mode once it recognizes a different VIN. This will require REPLACEMENT of the head unit to restore operation. To prevent easy re-use of stolen Head units additional features are introduced with 11/15 ISTA/P software to bring NBT-EVO to a higher security level. In NBT-EVO the mechanism is called ""Trusted VIN"""
Associated Products (79)Associated Documents - March 1, 2016•Document ID: 10151161Service Bulletin/Repair InstructionsEQUIPMENT
- Mfr Comm. #:
- B010616
- Date Added:
- December 10, 2018
- Manufacturer:
- BMW
Summary"Supply and Retrofit an Additional Key Radio Remote Control (FOB) ""without"" Display. While mid-year model/equipment level changes to vehicles commonly occur within the automobile industry, as previously announced, BMW of North America, LLC (""BMW NA"") has decided to offer this ""newer equipment level"" to eligible early-adopter G12 (7 Series Sedan) owners/customers that qualify."
Associated Products (2)Associated Documents - February 1, 2016•Document ID: 10151110Service Bulletin/Repair InstructionsEQUIPMENT; ELECTRICAL SYSTEM
- Mfr Comm. #:
- B620416
- Date Added:
- December 10, 2018
- Manufacturer:
- BMW
SummaryHeadUp Display Does not Work After Programming. After programming the vehicle with ISTA/P 3.57.3 or 3.58.x; one, or more, of the following situations could exist: The LED display of the tachometer in the instrument cluster is blacked out when door is opened and engine is running (shown below, left). After closing the door, tachometer will display again (shown below, right). The Check Control message is not displayed. HUD (HeadUp Display) does not work. No fault memory is displayed in the final report from ISTA/P or during PDI. This affects vehicles with I-Level S15A-15-11-503 or S15A-16-03-50x. This will not occur in vehicles produced after June 29, 2016. A programming abort occured during programming of the instrument cluster causing a software error in the instrument cluster.
Associated Products (2)Associated Documents - February 1, 2016•Document ID: 10151095Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:SOFTWARE; SUSPENSION
- Mfr Comm. #:
- B340116
- Date Added:
- December 10, 2018
- Manufacturer:
- BMW
Summary"SUBJECT Dynamic Stability Control (DSC) Warning Lamp, Lights Up. Various ""DSC warning lamps lights up in the instrument cluster, including the display: ""Suspension control system failed"". DSC control unit"
Associated Products (2)Associated Documents