BMW CE 02 Service Bulletins (2024)
7 manufacturer communications on file.
- March 14, 2025•Document ID: 11015822Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- MC620425
- Date Added:
- March 21, 2025
- Manufacturer:
- BMW
SummaryThe motorcycle can no longer connect with the BMW Motorrad Connected app due to pairing issue.
Associated Products (3)Associated Documents - January 31, 2025•Document ID: 11013425Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- M120125
- Date Added:
- February 3, 2025
- Manufacturer:
- BMW
SummaryLow power and top speed reduced at low temperatures. The power reduction is due to low temperature of the drive battery cells. Summary of the available power: Between approx. 32 °F to 54 °F cell temperature: There will be limited power, the “turtle” symbol is visible in the instrument cluster until the drive battery has warmed up. Between approx. 14 °F to 32 °F cell temperature: When starting, only the drive battery with the higher State of Charge (SoC) is activated. As soon as both batteries have the same SoC, the second drive battery is switched on while driving. (As long as the SoC is not the same, the customer continues to drive with only one drive battery.) For approx. below 14 °F cell temperature: The vehicle cannot be driven because the drive batteries cannot provide enough electrical current. Note: Activation of the second drive battery at low temperatures has been improved with I level XS01-24-07-525 available with ISTA version 4.52.10 or newer. Charging power: The vehicle cannot be charged at below 32 °F cell temperature. (See owner’s manual.)
Associated Products (1)Associated Documents - January 2, 2025•Document ID: 11013067Service Bulletin/Repair InstructionsUNKNOWN OR OTHER
- Mfr Comm. #:
- MC620125
- Date Added:
- January 23, 2025
- Manufacturer:
- BMW
SummaryThe remaining range is calculated using the rider inputs (throttle position, rate of travel, mode of operation, etc.). During short, high load (frequent full throttle) test rides, the remaining range calculation can be come shorter.
Associated Products (1)Associated Documents - October 17, 2024•Document ID: 11009562Service CampaignUNKNOWN OR OTHER
- Mfr Comm. #:
- MC710124
- Date Added:
- November 1, 2024
- Manufacturer:
- BMW
SummaryAfter a quality inspection it was found that the “Tire” and “Emissions Control” labels contain incorrect data.
Associated Products (1)Associated Documents - September 2, 2024•Document ID: 11006764OtherUNKNOWN OR OTHER
- Mfr Comm. #:
- MS710015
- Date Added:
- September 2, 2024
- Manufacturer:
- BMW
SummaryDelivery Stop STOP710015 for the CE 02.
Associated Products (1)Associated Documents - July 23, 2024•Document ID: 11005282Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- MC610624
- Date Added:
- July 26, 2024
- Manufacturer:
- BMW
SummaryA drive battery is not recognized in the vehicle and does not respond when the charging status display key ispressed. This is because the state of charge of the battery drops to a low voltage, the battery is put into a deep sleepmode to protect itself. No other state can be established while in deep sleep mode.
Associated Products (1)Associated Documents - June 11, 2024•Document ID: 11002653Service Bulletin/Repair InstructionsENGINE
- Mfr Comm. #:
- MC610324
- Date Added:
- July 1, 2024
- Manufacturer:
- BMW
SummaryThe recuperation restriction warning is displayed in the instrument cluster. The following fault is stored in the engine control unit: 0x3A40D0 - Restriction of recuperation, available battery charging capacity The warning indicates that only limited recuperation is possible. It may be necessary to apply the brake toachieve a deceleration that is normally achieved with recuperation. When the warning is displayed: The warning is displayed when the possible recuperation is less than or equal to 30%. The warning is also displayed when the battery temperature is below 50°F (10 °C) or above 113°F (45 °C).
Associated Products (1)Associated Documents