BMW 750Li Service Bulletins (2016)
596 manufacturer communications on file.
- April 14, 2016•Document ID: 10216791Service Bulletin/Repair InstructionsEQUIPMENT
- Mfr Comm. #:
- TEC24
- Date Added:
- August 1, 2022
- Manufacturer:
- BMW
SummaryTech24 Snap-in Adapter Return
Associated Products (59)Associated Documents - April 1, 2016•Document ID: 10216793Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- TEC26
- Date Added:
- August 1, 2022
- Manufacturer:
- BMW
SummaryTEC26 Turbo Charger Return
Associated Products (59)Associated Documents - April 1, 2016•Document ID: 10151270Service Bulletin/Repair InstructionsEQUIPMENT:APPLIANCE:AIR CONDITIONER; ELECTRICAL SYSTEM:SOFTWARE
- Mfr Comm. #:
- B640616
- Date Added:
- December 10, 2018
- Manufacturer:
- BMW
Summary"Automatic Rear A/C System Resets to Default at Engine Start. The temperature setting of the automatic rear air-conditioning system is always reset to the ""DEFAULT"" value after the engine starts or after a terminal change. Software in the control panel of the automatic rear air-conditioning system"
Associated Products (2)Associated Documents - April 1, 2016•Document ID: 10151261Service Bulletin/Repair InstructionsSTEERING
- Mfr Comm. #:
- B320516
- Date Added:
- December 10, 2018
- Manufacturer:
- BMW
SummaryErroneous Electric Power Steering (EPS) Fault. INFORMATION This is an erroneous fault! After a terminal status change, the fault disappears until the next diagnostic session. Do not replace any parts as this will not provide a resolution. This erroneous fault will be eliminated with ISTA/P 3.59 (I-Level S15A 16-07-501). WARRANTY INFORMATION Not applicable.
Associated Products (2)Associated Documents - April 1, 2016•Document ID: 10151251Service Bulletin/Repair InstructionsENGINE
- Mfr Comm. #:
- B120616
- Date Added:
- December 10, 2018
- Manufacturer:
- BMW
Summary"N63R - Engine Malfunction Warning Due to Vapor Forming in the Fuel System. The ""Drivetrain Malfunction"" Check Control warning is displayed and the Service Engine Soon (MIL) Lamp may also be on. In areas where winterized fuel is used, this situation may occur after hot engine soak restart. Any of the following fault codes can be stored in the DME. 110001 - Cylinder cutout: Fuel high pressure too low 11B213 - Low pressure fuel system: Pressure too low 11A002 - Fuel high pressure, plausibility: Pressure too low 11A102 - Fuel high pressure 2: Pressure too low In addition, various misfire faults may also be stored in some cases. With high engine compartment temperatures, vapor can form in the fuel system due to the fuel quality characteristics of certain winter fuel blends."
Associated Products (1)Associated Documents - April 1, 2016•Document ID: 10151245Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- B110316
- Date Added:
- December 10, 2018
- Manufacturer:
- BMW
Summary"N63R DME Fault Code 20A508 Turbocharger Coolant Pump Blocked. A Check Control message is active for ""Drive Faulty"". The following fault code is stored in the DME: - 20A508 - Engine cooler system: Shut down turbocharger coolant pump due to blockage Auxiliary coolant pump for the turbocharger becomes blocked as a result of its failure."
Associated Products (1)Associated Documents - March 21, 2016•Document ID: 10216792Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- TEC25
- Date Added:
- August 1, 2022
- Manufacturer:
- BMW
SummaryTec25 Wishbone Return
Associated Products (59)Associated Documents - March 1, 2016•Document ID: 10216758Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- SIM110115
- Date Added:
- August 1, 2022
- Manufacturer:
- BMW
SummaryMINI engine oil part number transition and model year 2016 engine oils
Associated Products (59)Associated Documents - March 1, 2016•Document ID: 10216757Service Bulletin/Repair InstructionsEQUIPMENT
- Mfr Comm. #:
- SIM010603
- Date Added:
- August 1, 2022
- Manufacturer:
- BMW
SummaryMINI "Enhanced" dealer self authorized (DSA)K goodwill program
Associated Products (59)Associated Documents - March 1, 2016•Document ID: 10151207Service Bulletin/Repair InstructionsEQUIPMENT:ELECTRICAL
- Mfr Comm. #:
- B840815
- Date Added:
- December 10, 2018
- Manufacturer:
- BMW
Summary"During the QC1 the BMW Assist Test Call Fails. After the transport mode is deleted (during the QC1), a BMW Assist (SOS) test call is made by pressing the SOS/ E-Call button. However, the call only connects via voice (no data is transmitted). The operator indicates that a crash call has been sent. ATM fault code ""B7F348 - Provisioning without signature OTA"" is stored. The provisioning of the ATM (Advanced Telematics Module) has failed."
Associated Products (52)Associated Documents - March 1, 2016•Document ID: 10151205Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- B660616
- Date Added:
- December 10, 2018
- Manufacturer:
- BMW
Summary"Error Patterns with BMW Display Key. One or more of the following error patterns occurred while using the BMW display key; these error patterns only occur with the BMW display key: Comfort Access does not work while opening and closing. The BMW display key cannot be charged (USB cable or wirelessly). The BMW display key screen is locked and cannot display vehicle information. Sporadically, the engine will not start with BMW display key and one of the following CCM ""Check Control messages"" is displayed: Remote control, remote control not present or faulty. Not possible to start engine. Hold the remote near the steering column and then press the START-STOP button. see ""Owner's Handbook"". NOTE: The BMW display key continues to be able to lock/unlock the vehicle with the buttons, and/or the engine started, by emergency detection procedure (placing the BMW display key on the marked area of the steering column). Data lost during the communication between the BMW display key and FBD receiver"
Associated Products (2)Associated Documents - March 1, 2016•Document ID: 10151204Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- B660516
- Date Added:
- December 10, 2018
- Manufacturer:
- BMW
SummaryBMW Display Key Battery is Completely Discharged at Vehicle Delivery. The battery of the BMW display key is completely discharged during transport and is almost empty at the time of vehicle delivery. Extended vehicle storage.
Associated Products (2)Associated Documents - March 1, 2016•Document ID: 10151202Service Bulletin/Repair InstructionsLANE DEPARTURE: SENSING SYSTEM: CAMERA
- Mfr Comm. #:
- B660316
- Date Added:
- December 10, 2018
- Manufacturer:
- BMW
Summary"Driver Assistance System Limited Support CCM. A Check Control Message (CCM) is displayed advising the customer that ""Support provided by the driver assistance system is limited"". You can continue to drive. One or more of the following faults codes may be stored: KAFAS Control unit: 0x800A01 - Camera field of view disturbed by weather conditions 0x800ABE - Camera blindness SAS control unit: 0xD1AD88 - Signal fault invalid Software error in the KAFAS control unit"
Associated Products (2)Associated Documents - March 1, 2016•Document ID: 10151200Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; EQUIPMENT
- Mfr Comm. #:
- B651316
- Date Added:
- December 10, 2018
- Manufacturer:
- BMW
Summary"NBT-EVO Head Unit Cannot Be Swapped Between Vehicles for Testing. If an NBT-EVO head unit is swapped into a different vehicle it will enter a locked mode once it recognizes a different VIN. This will require REPLACEMENT of the head unit to restore operation. To prevent easy re-use of stolen Head units additional features are introduced with 11/15 ISTA/P software to bring NBT-EVO to a higher security level. In NBT-EVO the mechanism is called ""Trusted VIN"""
Associated Products (79)Associated Documents - March 1, 2016•Document ID: 10151196Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC.
- Mfr Comm. #:
- B650616
- Date Added:
- December 10, 2018
- Manufacturer:
- BMW
SummaryNBT Head Unit Aborts Import of CD. While importing a CD to the internal music collection of an NBT head unit the process aborts. You will see 'import error' on the radio display when this occurs. NBT Head Unit software
Associated Products (159)Associated Documents - March 1, 2016•Document ID: 10151195Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; EQUIPMENT:ELECTRICAL:ANTI-THEFT DEVICES
- Mfr Comm. #:
- B650516
- Date Added:
- December 10, 2018
- Manufacturer:
- BMW
Summary"False Alarms of the Anti-Theft Alarm System. The alarm (DWA) siren continues to activate after locking vehicle An ""unapproved"" device is connected to the On-Board Diagnostics (OBD) port of the vehicle. This keeps the Ethernet communication line active which triggers the alarm when the vehicle tries to enter sleep mode."
Associated Products (18)Associated Documents - March 1, 2016•Document ID: 10151193Service Bulletin/Repair InstructionsEQUIPMENT:APPLIANCE:AIR CONDITIONER
- Mfr Comm. #:
- B641115
- Date Added:
- December 10, 2018
- Manufacturer:
- BMW
SummaryIonizer Faults are Stored in the Integrated Automatic Heating/Air Conditioning. Faults are stored in IHKA (Integrated Automatic Heating/Air Conditioning): FC 801230 - Ionizer: Internal Fault FC 801231 Ionizer: emitter not connected Ionizer does not work at all. Software error in the Ionizer control unit
Associated Products (1)Associated Documents - March 1, 2016•Document ID: 10151190Service Bulletin/Repair InstructionsEQUIPMENT
- Mfr Comm. #:
- B640316
- Date Added:
- December 10, 2018
- Manufacturer:
- BMW
Summary"Air Conditioning Refrigerant R1234yf Introduction. Highlights of R-1234yf Meets SAE J2888_201301 ""This SAE Standard covers fittings, couplers, and hoses intended for connecting service hoses from mobile air- conditioning Systems to service equipment such as charging, recovery and recycling equipment"" New tools and equipment are required. To service vehicles equipped with R-1234yf refer to SI B04 02 16. Air conditioning technician certification is required to work on system. Refer to your State Law. Unique low and high side fittings. Revised evaporator core as per SAE J2842. System will use about 5% more refrigerant than a comparable R134a system. System oil is a specific PAG oil. Refer to ISTA repair recommendation. Do not interchange components between systems using other refrigerants. Do not reuse Seals / O-ring material from another system. The system piping has internal heat exchangers (IHX or IWT) as introduced in the G12 (7 series). SAFETY INFORMATION Several precautions need to be observed when working on automotive air conditioning systems: Always wear eye protection and gloves while handling refrigerant or servicing air conditioning system. Avoid breathing R1234yf lubricant vapor or mist. Use only approved service equipment to discharge A/C systems. If refrigerant or compressor oil contacts the skin or eyes, large quantities of cool water should be used to flush the affected area. Never heat a refrigerant container with an open flame. Keep all refrigerant away from open flames. Under no circumstances should R1234yf service equipment or vehicle A/C systems be pressure tested or leak tested with air/R1234yf mixtures. NOTE: The use of compressed air (shop air) for leak detection in an R1234yf system can contaminate the system and/or refrigerant with moisture. Leak detection equipment that meets the SAE J2791 standard will work with R1234yf Never use fittings for an R12 or R134a system on an R1234yf system. Any difficulty in connecting service equipm
Associated Products (117)Associated Documents - March 1, 2016•Document ID: 10151161Service Bulletin/Repair InstructionsEQUIPMENT
- Mfr Comm. #:
- B010616
- Date Added:
- December 10, 2018
- Manufacturer:
- BMW
Summary"Supply and Retrofit an Additional Key Radio Remote Control (FOB) ""without"" Display. While mid-year model/equipment level changes to vehicles commonly occur within the automobile industry, as previously announced, BMW of North America, LLC (""BMW NA"") has decided to offer this ""newer equipment level"" to eligible early-adopter G12 (7 Series Sedan) owners/customers that qualify."
Associated Products (2)Associated Documents - February 1, 2016•Document ID: 10151119Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; EQUIPMENT ADAPTIVE/MOBILITY
- Mfr Comm. #:
- B840314
- Date Added:
- December 10, 2018
- Manufacturer:
- BMW
SummarySI B84 03 14 February 2016 Communication Systems Technical Service This Service Information bulletin supersedes SI B84 03 14 dated October 2014. SUBJECT Bluetooth Connection Failures. There are various connectivity failures with the following devices: Apple iPhones Samsung S6 and the S6 Edge. Connectivity failure examples are: Call disconnection - Call is transferred back to the handset. In some instances the call is then transferred back to the vehicle. Contact List incomplete General connection failures CAUSE Apple iOS software (issue started with iOS 8.3 continues with iOS 9.x and its variants) Samsung S6 and S6 Edge device firmware CORRECTOPM None available at this time. We are currently working with the device manufacturer on a solution.
Associated Products (267)Associated Documents