BMW 335i Service Bulletins (2012)
556 manufacturer communications on file.
- August 1, 2019•Document ID: 10165279Service Bulletin/Repair InstructionsENGINE
- Mfr Comm. #:
- B121318
- Date Added:
- September 23, 2019
- Manufacturer:
- BMW
SummaryDME FC 21A02D - COMBUSTION CONTROL: VALVE LIFT AT IDLE This Service Information Bulletin (Revision #2) replaces SI B12 13 18 dated May 2018. Correction software level updated Procedure text changes made due to an ISTA/D test plan name change Adjusted text in the Warranty section for use with AIR and the ISTA/D test plan name change. The vehicle will run rough or hesitate when accelerating from a stationary position.
Associated Products (64)Associated Documents - August 1, 2019•Document ID: 10165266Service Bulletin/Repair InstructionsEQUIPMENT
- Mfr Comm. #:
- B651519
- Date Added:
- September 23, 2019
- Manufacturer:
- BMW
SummarySECURITY IMPROVEMENTS FOR CONNECTEDDRIVE. Security patches for non-safety critical vulnerabilities in BMW head units Entry Nav Entry Media NBT and NBT EVO.
Associated Products (199)Associated Documents - August 1, 2019•Document ID: 10165263Service Bulletin/Repair InstructionsEQUIPMENT:APPLIANCE:AIR CONDITIONER
- Mfr Comm. #:
- B640613
- Date Added:
- September 23, 2019
- Manufacturer:
- BMW
SummaryA/C COOLING: INTERMITTENT REDUCTION OF AIR FLOW This Service Information Bulletin (Revision 9) supersedes SI B64 06 13 dated June 2017. Customer may complain of reduced air flow when the air conditioning system is operated for an extended time usually longer than 30 minutes. The evaporator starts to freeze up due to the position of the evaporator temperature sensor.
Associated Products (60)Associated Documents - July 12, 2019•Document ID: 10162434Service Bulletin/Repair InstructionsEQUIPMENT:ELECTRICAL:NAVIGATIONAL SYSTEM(GLOBAL POSITIONING SYSTEM)
- Mfr Comm. #:
- 651512
- Date Added:
- July 12, 2019
- Manufacturer:
- BMW
SummaryService Action: CIC - Install Navigation Road Map Database 2013. Before delivering affected vehicles to the customer, the Car Information Computer (CIC) road map database 2013 must be installed onto the CIC internal Hard Disc Drive (HDD).
Associated Products (71)Associated Documents - July 12, 2019•Document ID: 10162433Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 651012
- Date Added:
- July 12, 2019
- Manufacturer:
- BMW
Summary"Headunit-Basic: CID is blank and "NO SIGNAL" is Displayed. Intermittently the Central Information Display (CID) is blank and "NO SIGNAL" is displayed on the CID. Fault Code B7F8C3 "no response from CID (HW error: loss of CID communication)" is stored in the HU-B Error in the Headunit-Basic (HU-B), also called Radio Professional or ENTRY head unit."
Associated Products (7)Associated Documents - July 12, 2019•Document ID: 10162432Service Bulletin/Repair InstructionsVISIBILITY/WIPER; VISIBILITY:WINDSHIELD WIPER/WASHER; LATCHES/LOCKS/LINKAGES:TRUNK LID:LOCK; ELECTRICAL SYSTEM; LATCHES/LOCKS/LINKAGES
- Mfr Comm. #:
- Radio and Air Co
- Date Added:
- July 12, 2019
- Manufacturer:
- BMW
Summary"Service Action: Program Control Units (FEM). One or more of the following situations may occur when using the windshield wipers: * After the wipers are switched off, they do not remain in the park position, but in the middle of the windshield. * The wipers continue to operate even when the ignition is switched off. * The wipers only partially moved when switched on. * Hazard warning lights flash permanently. * Vehicle locks and unlocks on its own. * Interior lights turn on by themselves. * The trunk lid cannot be opened. AFFECTED VEHICLES This Service Action involves F30 which were produced October 2011 to August 2012. In order to determine whether a specific vehicle has had this Service Action completed or is affected by this Service Action, first check the B-pillar label for code number 631. If code number 631 has been punched out, the campaign has already been performed. If code number 631 has not been punched out, it will be necessary to utilize the "Service Menu" of DCSnet (Dealer Communication System) or the Key Reader. Based on the response of the system, either proceed with the corrective action or take no further action."
Associated Products (6)Associated Documents - July 10, 2019•Document ID: 10162431Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 613312
- Date Added:
- July 11, 2019
- Manufacturer:
- BMW
Summary"Erroneous CC Message "Remote control! Do not switch off the engine" is Displayed. An erroneous CC message, "Remote control!" " Do not switch off the engine" is displayed in the Central Information Display (CID). The engine can still be started, even with the CC message displayed. CAUSE: Car Access System (CAS) software error"
Associated Products (63)Associated Documents - July 10, 2019•Document ID: 10162430Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 613212
- Date Added:
- July 11, 2019
- Manufacturer:
- BMW
Summary"REM: Various Electrical Faults in Rear of a Vehicle. Various electrical faults associated with the rear of the vehicle occur, including one or more of the following: * The REM (Rear Electronic Module) does not respond to diagnosis. * The one-touch function of the rear power windows is inoperative. * The rear power windows cannot be initialized. * The trunk lid cannot be opened. * The brake lights are not working (check control message "Left/right brake light failed" is displayed). * The rear turn indicator lights are not working (check control message "Rear left/right turn indicator failed" is displayed). One or more of the following faults are stored in the REM: * "804805 Internal software control unit fault" * "804876 Turn indicator, rear left, faulty" * "804877 Turn indicator, rear right, faulty" * "804872 Brake light, left, faulty" * "804874 Brake light, right, faulty" * "30195 Window regulator, passenger's side door, rear: invalid characteristic curve, no normalization present" * "30115 Power window, rear door on driver's side: invalid characteristic curve, no normalization present" *""301A0 Window regulator on passenger's side door, rear: system is not normalized" * "30120 Power window, rear door on driver's side: system is not standardized" CAUSE: Rear power window drive(s) faulty"
Associated Products (6)Associated Documents - July 10, 2019•Document ID: 10162424Service Bulletin/Repair InstructionsSTRUCTURE:BODY:DOOR; VISIBILITY:GLASS, SIDE/REAR
- Mfr Comm. #:
- 512212
- Date Added:
- July 10, 2019
- Manufacturer:
- BMW
SummaryWind Noise from Front Door Window Seal by Side Mirror. The front window may have wind noise by the side mirror when driving. CAUSE The window guide seal is not properly fitted to the door.
Associated Products (6)Associated Documents - July 10, 2019•Document ID: 10162404Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; VISIBILITY:REARVIEW MIRRORS/DEVICES:EXTERIOR
- Mfr Comm. #:
- 513608
- Date Added:
- July 10, 2019
- Manufacturer:
- BMW
Summary"Outside Door Mirror Moves when Locking or Unlocking the Vehicle. The door mirror tilts immediately after unlocking or locking. The mirror position does not correspond to the memory position preset by the customer. Pressing the seat memory button typically will return the mirror to the stored position. Poor electrical contacts of the mirror drive in the mirror housing INFORMATION The problem has been integrated into ISTA diagnostics. Follow the diagnosis test plan using the latest ISTA version. In Information Search, select the "Function Structure"" tab. Select Body, Mirror, Door mirror, Driver's or passenger side, Exterior Mirror Malfunction, and then press "Start Search". Select test plan ""AM5102_00010".
Associated Products (72)Associated Documents - July 10, 2019•Document ID: 10162399Service Bulletin/Repair InstructionsEQUIPMENT:MECHANICAL; ENGINE; FUEL SYSTEM, GASOLINE:DELIVERY:FUEL PUMP
- Mfr Comm. #:
- 130512
- Date Added:
- July 10, 2019
- Manufacturer:
- BMW
SummaryN20 Engine: Ticking Noise from High-pressure Fuel Pump. The customer complains of a high-frequency ticking noise from the engine compartment. The noise can be heard inside and outside the vehicle. Mechanical vibrations inside the high-pressure fuel pump.
Associated Products (9)Associated Documents - July 9, 2019•Document ID: 10162395Service Bulletin/Repair InstructionsEQUIPMENT; ENGINE AND ENGINE COOLING; EQUIPMENT ADAPTIVE/MOBILITY
- Mfr Comm. #:
- 121412
- Date Added:
- July 10, 2019
- Manufacturer:
- BMW
SummaryN55 Engine: Various Faults Stored in DME Related to VANOS and Camshaft Position. A rattling noise can be heard from the engine compartment; the engine has a loss of power; and the Service Engine Soon lamp is illuminated. One or more of the following faults may be stored. E70, E71, E82, E88, E90, E92 and E93: 2D5A - VANOS, intake: control fault, camshaft sticking 2D5B - VANOS, intake: control fault, position not reached 2D60 - VANOS, exhaust: control fault, camshaft sticking 2D61 - VANOS, exhaust: control fault, position not reached 2D9F - camshaft input sensor: signal implausible 2DA1 - Camshaft exhaust sensor: signal implausible 300C - Camshaft input sensor: signal high 300D - Camshaft input sensor: signal low 300E - Camshaft exhaust sensor: signal high 300F - Camshaft exhaust sensor: signal low F07, F10, F12, F13 and F25: 130104 - VANOS, intake: control fault, camshaft sticking 130108 - VANOS, intake: control fault, position not reached 130304 - VANOS, exhaust: control fault, camshaft sticking 130308 - VANOS, exhaust: control fault, position not reached 130E11 - Camshaft input sensor: signal implausible 130F11 - Camshaft exhaust sensor: signal implausible 164020 - Camshaft input sensor: signal high 164021 - Camshaft input sensor: signal low 164030 - Camshaft exhaust sensor: signal high 164031 - Camshaft exhaust sensor: signal low CAUSE One or both (intake and/or exhaust) of the VANOS gear assemblies have failed; the attaching bolts may have also loosened and/or broken.
Associated Products (81)Associated Documents - July 1, 2019•Document ID: 10163995Service Bulletin/Repair InstructionsEQUIPMENT ADAPTIVE/MOBILITY; EQUIPMENT:ELECTRICAL; ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL:CATALYTIC CONVERTOR
- Mfr Comm. #:
- B122319
- Date Added:
- August 19, 2019
- Manufacturer:
- BMW
SummaryDIAGNOSTIC HINT: CATALYTIC CONVERTER INSPECTION AFTER LOSS OF CRANKSHAFT SIGNAL. In certain situations when the crankshaft position signal is lost while driving the malfunction indicator lamp (MIL) and an engine malfunction check control message (CCM #29) may be displayed. The engine may run roughly or with reduced power.
Associated Products (165)Associated Documents - June 1, 2019•Document ID: 10163049Service Bulletin/Repair InstructionsVISIBILITY:WINDSHIELD WIPER/WASHER:SWITCH/WIRING
- Mfr Comm. #:
- B610819
- Date Added:
- July 22, 2019
- Manufacturer:
- BMW
SummaryService Information June 2019 General Electrical Systems B61 08 19 Technical Service WINDSHIELD WIPERS SWITCH ON BY THEMSELVES. The windshield wipers switch on by themselves and can no longer be switched off despite activation of the switch. An internal software error in the SZL (steering column switch cluster).
Associated Products (58)Associated Documents - June 1, 2019•Document ID: 10163047Service Bulletin/Repair InstructionsSTRUCTURE
- Mfr Comm. #:
- B540907
- Date Added:
- July 22, 2019
- Manufacturer:
- BMW
SummaryRETRACTABLE HARDTOP STATUS REQUEST SUPPLEMENT. This Service Information bulletin replaces SI B54 09 07 dated September 2018.
Associated Products (30)Associated Documents - June 1, 2019•Document ID: 10163029Service Bulletin/Repair InstructionsENGINE
- Mfr Comm. #:
- B110919
- Date Added:
- July 22, 2019
- Manufacturer:
- BMW
SummaryN55 ENGINE: FC 28A0 OR 101F01 THROTTLE VALVE OPENING ANGLE. The engine malfunction warning is illuminated and one of the following fault codes are stored in the DME shortly after programming the vehicle or with a customer complaint.
Associated Products (71)Associated Documents - June 1, 2019•Document ID: 10163027Service Bulletin/Repair InstructionsENGINE; ENGINE AND ENGINE COOLING:ENGINE:GASOLINE:BELTS AND ASSOCIATED PULLEYS
- Mfr Comm. #:
- B110119
- Date Added:
- July 22, 2019
- Manufacturer:
- BMW
SummaryENGINE VIBRATIONS OR NOISE This Service Information bulletin replaces SI B11 01 19 dated February 2019.
Associated Products (118)Associated Documents - May 1, 2019•Document ID: 10161581Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; EQUIPMENT ADAPTIVE/MOBILITY
- Mfr Comm. #:
- B840719
- Date Added:
- June 24, 2019
- Manufacturer:
- BMW
SummaryBLUETOOTH CONNECTION IS LOST DURING A PHONE CALL. During an active call the call audio autonomously switches from the vehicle hands-free system to the phone.
Associated Products (72)Associated Documents - May 1, 2019•Document ID: 10161579Service Bulletin/Repair InstructionsEQUIPMENT
- Mfr Comm. #:
- B840311
- Date Added:
- June 24, 2019
- Manufacturer:
- BMW
SummaryTELEMATICS CONTROL UNIT ACTIVATION VIA DCSNET FOR BMW ASSIST.
Associated Products (129)Associated Documents - May 1, 2019•Document ID: 10161578Service Bulletin/Repair InstructionsEQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
- Mfr Comm. #:
- B840214
- Date Added:
- June 24, 2019
- Manufacturer:
- BMW
SummaryINFORMATION New information provided by this revision is preceded by this symbol. This Service Information bulletin replaces SI B84 02 14 dated September 2018.
Associated Products (137)Associated Documents