Audi S7 Service Bulletins (2014)
766 manufacturer communications on file.
- June 20, 2014•Document ID: 10122413Service Bulletin/Repair InstructionsFUEL SYSTEM, GASOLINE; ENGINE AND ENGINE COOLING
- Mfr Comm. #:
- A011480 2037472-
- Date Added:
- November 8, 2017
- Manufacturer:
- AUDI
SummaryThe MIL is on. DTC P310B00 (DFCC 2638) (Low fuel pressure regulation, fuel pressure outside specification) is stored in the engine control module, J623 (address word 01). DTC P310B00 (DFCC 2638) can be caused by quantity deviations of the fuel pump.
Associated Products (5)Associated Documents - June 9, 2014•Document ID: 10231127Service Bulletin/Repair InstructionsEQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL; ELECTRICAL SYSTEM:SOFTWARE
- Mfr Comm. #:
- Edition89
- Date Added:
- February 6, 2023
- Manufacturer:
- AUDI
SummaryElsaPro Software update and technical bulletins
Associated Products (270)Associated Documents - June 4, 2014•Document ID: 10228283Service Bulletin/Repair InstructionsTIRES; EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
- Mfr Comm. #:
- Service Informat
- Date Added:
- January 3, 2023
- Manufacturer:
- AUDI
SummaryAudi Tire Chain Information by Vehicle -- MY 2014
Associated Products (19)Associated Documents - June 4, 2014•Document ID: 10224962Service Bulletin/Repair InstructionsTIRES
- Mfr Comm. #:
- Service
- Date Added:
- October 31, 2022
- Manufacturer:
- AUDI
SummaryAudi Tire Chain Information by Vehicle -- MY 2014
Associated Products (18)Associated Documents - June 4, 2014•Document ID: 10221935Service Bulletin/Repair InstructionsEQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
- Mfr Comm. #:
- Service Informat
- Date Added:
- September 26, 2022
- Manufacturer:
- AUDI
SummaryAudi Tire Chain Information by Vehicle -- MY 2014
Associated Products (19)Associated Documents - June 1, 2014•Document ID: 10122411Service Bulletin/Repair InstructionsTIRES
- Mfr Comm. #:
- 2014 Audi Tire C
- Date Added:
- November 8, 2017
- Manufacturer:
- AUDI
SummaryThis document contians the Audi tire chain information for all MY 2014 vehicles.
Associated Products (19)Associated Documents - May 29, 2014•Document ID: 10212703Service Bulletin/Repair InstructionsPOWER TRAIN
- Mfr Comm. #:
- 37 13 07 2033658
- Date Added:
- May 31, 2022
- Manufacturer:
- AUDI
SummaryVehicle lacks power or will not move after stop due to simultaneous depressing of the brake and accelerator pedals
Associated Products (223)Associated Documents - May 28, 2014•Document ID: 10228295Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- 00146320335762
- Date Added:
- January 3, 2023
- Manufacturer:
- AUDI
SummaryAlthough the correct amount of oil was added to the engine during an oil change service, a check of the oil level shows that the oil level is not okay. When an unapproved aftermarket speed-filling device is used to add oil to the engine, the increased oil flow rate may force oil into the intake manifold or combustion chamber, creating the potential for engine damage.
Associated Products (189)Associated Documents - May 28, 2014•Document ID: 10226529Service Bulletin/Repair InstructionsPOWER TRAIN
- Mfr Comm. #:
- 37143020036586
- Date Added:
- November 21, 2022
- Manufacturer:
- AUDI
SummaryVehicle lacks power or will not move after stop due to simultaneous depressing of the brake and accelerator pedals
Associated Products (270)Associated Documents - May 28, 2014•Document ID: 10221947Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- 00146320335762
- Date Added:
- September 26, 2022
- Manufacturer:
- AUDI
SummaryAlthough the correct amount of oil was added to the engine during an oil change service, a check of the oil level shows that the oil level is not okay. When an unapproved aftermarket speed-filling device is used to add oil to the engine, the increased oil flow rate may force oil into the intake manifold or combustion chamber, creating the potential for engine damage.
Associated Products (189)Associated Documents - May 28, 2014•Document ID: 10210679Service Bulletin/Repair InstructionsELECTRONIC STABILITY CONTROL (ESC):CONTROL MODULE:SOFTWARE; POWER TRAIN
- Mfr Comm. #:
- 37 14 30 2003658
- Date Added:
- May 2, 2022
- Manufacturer:
- AUDI
SummaryThis condition may be caused when the brake pedal and the accelerator pedal are depressed simultaneously. Drivers who drive with their left foot resting on the brake pedal are prone to experience this condition. With the introduction of Electronic Power Control (EPC) (no accelerator cable) to fuel injection systems, an engine RPM control feature has been incorporated into the engine electronic control system software. Customer states that the engine returns to idle speed of approximately 1,400 RPM although the accelerator is depressed, and/or the vehicle hesitates (lacks power on take-off).
Associated Products (270)Associated Documents - May 28, 2014•Document ID: 10122465Service Bulletin/Repair InstructionsPOWER TRAIN:CLUTCH ASSEMBLY:PEDAL/HAND LEVER(MOTORCYCLE)
- Mfr Comm. #:
- A371430 2003658-
- Date Added:
- November 8, 2017
- Manufacturer:
- AUDI
SummarySupersedes Technical Service Bulletin Group 37 number 13-07 dated May 29, 2013. Customer states that the engine returns to idle speed of approximately 1,400 RPM although the accelerator is depressed, and/or the vehicle hesitates (lacks power on take-off). No DTCs are stored. This condition may be caused when the brake pedal and the accelerator pedal are depressed simultaneously. Drivers who drive with their left foot resting on the brake pedal are prone to experience this condition.
Associated Products (201)Associated Documents - May 28, 2014•Document ID: 10122452Service Bulletin/Repair InstructionsENGINE; EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
- Mfr Comm. #:
- A001463 2033576-
- Date Added:
- November 8, 2017
- Manufacturer:
- AUDI
SummarySupersedes Technical Service Bulletin Group 00 number 13-49 dated May 14, 2013. Although the correct amount of oil was added to the engine during an oil change service, a check of the oil level shows that the oil level is not okay. When an unapproved aftermarket speed-filling device is used to add oil to the engine, the increased oil flow rate may force oil into the intake manifold or combustion chamber, creating the potential for engine damage.
Associated Products (126)Associated Documents - May 13, 2014•Document ID: 10249085Service Bulletin/Repair InstructionsUNKNOWN OR OTHER
- Mfr Comm. #:
- Update91i8
- Date Added:
- January 22, 2024
- Manufacturer:
- AUDI
SummaryGoogle Maps Street View (NVLW))
Associated Products (264)Associated Documents - May 5, 2014•Document ID: 10067699Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- EDITION 84
- Date Added:
- May 23, 2016
- Manufacturer:
- AUDI
SummarySUMMARY TO BE PROVIDED ON A FUTURE DATE.
Associated Products (9)Associated Documents - May 2, 2014•Document ID: 10066330Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:SOFTWARE
- Mfr Comm. #:
- 2029714/3
- Date Added:
- May 19, 2016
- Manufacturer:
- AUDI
SummarySUMMARY TO BE PROVIDED ON A FUTURE DATE.
Associated Products (20)Associated Documents - May 2, 2014•Document ID: 10122472Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:SOFTWARE
- Mfr Comm. #:
- A641433 2029714-
- Date Added:
- November 8, 2017
- Manufacturer:
- AUDI
SummarySupersedes Technical Service Bulletin Group 64 number 12-22 dated July 5, 2012. After one or both of the front door control units (J386/J387) is replaced, one or both of the rear door control units (J3888/J389) cannot be coded or parameterized via an SVM specified vs. actual comparison (spec/actual). The parameter data in the software coding container has changed for the front and rear door control units. As a result, an SVM code is required to update the parameter data for any replacement control unit. Simply running an SVM spec/actual will not code nor update the parameter data in the new replacement control unit. A hardware change suggestion will be provided when an SVM spec/actual is executed. An additional hardware replacement is not required.
Associated Products (50)Associated Documents - April 24, 2014•Document ID: 10212672Service Bulletin/Repair InstructionsEQUIPMENT; STRUCTURE
- Mfr Comm. #:
- 27 14 23 2036392
- Date Added:
- May 31, 2022
- Manufacturer:
- AUDI
SummaryVibrations felt at 1000 rpm and 3000 rpm
Associated Products (10)Associated Documents - April 24, 2014•Document ID: 10210620Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; STRUCTURE
- Mfr Comm. #:
- 27 14 23 2036392
- Date Added:
- May 2, 2022
- Manufacturer:
- AUDI
SummaryThe basic settings of the active engine mounts in the subframe mount control module, J931, are deactivated when work is done on either of the vehicle electrical system control modules, J519 and/or J520 (for example, when a key is programmed). As a result, the vehicle vibrates or judders when cylinders are actively switched off.
Associated Products (10)Associated Documents - April 21, 2014•Document ID: 10212671Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- 27 14 22 2036392
- Date Added:
- May 31, 2022
- Manufacturer:
- AUDI
SummaryVibrations felt at 1000 rpm and 3000 rpm
Associated Products (10)Associated Documents