2022 Jeep Compass CVPM Update for Camera & Odometer Issues

Owners of the 2022 Jeep Compass may experience several issues related to the vehicle's camera systems and instrument cluster. These problems, including a blank top-down camera view, a flashing odometer, and the absence of backup camera gridlines, are detailed in Technical Service Bulletin (TSB) 08-168-24. This TSB outlines a software update for the Central Vision Processing Module (CVPM) as the necessary repair to resolve these concerns.

This 2022 Jeep Compass CVPM update is crucial for vehicles equipped with the Surround View Camera System (Sales Code XAK) that are exhibiting these specific symptoms and associated diagnostic trouble codes.

Symptoms

Customers may notice one or more of the following symptoms in their 2022 Jeep Compass:

• A Malfunction Indicator Lamp (MIL) illumination on the dashboard.
• The top-down camera view appears blank when selected in the radio menu.
• The odometer is flashing.
• No backup camera gridlines are displayed when the vehicle transmission is in reverse.

Fault Codes / DTCs

These symptoms are typically accompanied by the illumination of the Malfunction Indicator Lamp (MIL) and the presence of specific Diagnostic Trouble Codes (DTCs) stored in the vehicle's system:

Code	Description	Module
B2286-00	Calibration Not Learned - Lost Calibration	CVPM
B223B-00	Vehicle Configuration Mismatch	CVPM

Diagnosis

To diagnose these issues, technicians will use a Scan Tool (wiTECH) in conjunction with the diagnostic procedures available in DealerCONNECT/Service Library. It is essential to verify that all related systems are functioning correctly. If any DTCs or symptom conditions other than those listed in TSB 08-168-24 are present, they must be recorded and addressed before proceeding with the CVPM software update.

Repair Procedure Summary

The primary repair for the 2022 Jeep Compass CVPM update involves flashing the Central Vision Processing Module with the latest available software. The general steps for this procedure are:

1. Connect a battery charger to the vehicle to maintain battery voltage between 13.2 and 13.5 volts throughout the process.
2. Reprogram the CVPM using the wiTECH Diagnostic Application to install the most current software version.
3. Perform the PROXI Configuration Alignment routine, which can be found in the Guided Diagnostics menu.
4. Clear any Diagnostic Trouble Codes (DTCs) that may have been set in any module due to the reprogramming. The wiTECH application will automatically present these DTCs for clearing.

Required Tools

The following specialized tool is required to perform the software update:

• wiTECH or Equivalent: A diagnostic scan tool used for flashing modules and performing system alignments.

Important Warnings for Owners

Owners should be aware of specific instructions provided to technicians regarding the software update process:

• "Install a battery charger to ensure battery voltage does not drop below 13.2 volts. Do not allow the charging voltage to climb above 13.5 volts during the flash process."
• "If this flash process is interrupted/aborted, the flash should be restarted."

Owner Action

If your 2022 Jeep Compass is exhibiting a blank camera view, flashing odometer, or missing backup camera gridlines, and especially if your Malfunction Indicator Lamp (MIL) is illuminated, it is recommended to schedule an appointment with an authorized Jeep dealership. Inform them of the symptoms you are experiencing and mention Technical Service Bulletin 08-168-24. The dealer will perform the necessary CVPM software update under warranty provisions.

---

Source: NHTSA ID: 11005015