2025 Hyundai Ioniq 5 Inner Rear Lamp LED Inoperative TSB
Hyundai Technical Service Bulletin 25-BE-011H details an issue with certain 2025 Ioniq 5 vehicles where LEDs in the inner rear combination lamp may be inoperative. This bulletin provides inspection and replacement guidelines.

Certain 2025 Hyundai Ioniq 5 (NEA EV) vehicles may experience a condition where some or all of the Light Emitting Diodes (LEDs) in the inner rear combination lamp are inoperative. This issue specifically affects the LEDs housed within the inner rear combination lamp assembly, which are part of the auxiliary lamp circuit. It is important to note that this condition does not impact the functionality of the brake or turn signal operation.
This technical service bulletin, 25-BE-011H, provides a detailed procedure for Hyundai technicians to inspect the inner rear combination lamp and, if necessary, replace the entire assembly to resolve the inoperative LEDs.
Symptoms
Owners of affected 2025 Hyundai Ioniq 5 vehicles may observe the following symptom:
- Some or all LEDs on the inner rear combination lamp are inoperative.
This issue pertains specifically to the auxiliary lighting function and does not affect critical safety lighting such as brake lights or turn signals.
Important Warnings for Owners
Hyundai has issued several important notices regarding this TSB:
- "To avoid any potential damage to IONIQ vehicles, IONIQ repairs can only be performed at IONIQ certified dealers."
- "If the inside rear combination lamps are working as designed, but other concerns are present, this TSB does NOT apply. Diagnose and repair per the shop manual."
- "The incident parts are subject to callback through the normal Warranty Technical Center (WTC) parts return process. Claim is subject to debit if the part is not returned."
Diagnosis and Trigger Conditions
To diagnose the 2025 Hyundai Ioniq 5 inner rear lamp issue, technicians will perform a specific test:
- The vehicle's key fob is removed, and all doors are closed.
- The technician stands approximately 8 feet away from the rear bumper with the key fob.
- The lock button on the key fob is pressed 15 times, with a 1-second pause between each press. During this process, the entire rear tail lamp will cycle ON and OFF.
- The technician observes the inner rear combination lamps to ensure all LEDs are working as designed.
If the inner rear combination lamp LEDs are not working as designed, the replacement procedure outlined in TSB 25-BE-011H is then followed.
Repair Procedure Summary
The repair for the inoperative 2025 Hyundai Ioniq 5 inner rear lamp involves inspecting the lamp and replacing the assembly if necessary. The procedure includes several steps for removal and installation:
- Preparation: Technicians must first remove the trunk handle cover by unscrewing two Phillips screws. A plastic trim removal tool is recommended to prevent damage.
- Trunk Switch Removal: The trunk switch is carefully pried outward, its connector disconnected, and the switch removed.
- Tailgate Trim Removal: The tailgate lower trim is removed using a panel removal tool, carefully prying the corners and then pulling the entire trim away from the tailgate assembly.
- Lamp Disconnection: The electrical connector for the inside rear combination lamp is disconnected.
- Lamp Removal: Nine 10 mm nuts securing the lamp are removed. The lamp is then carefully removed. If it does not come out easily, a flat tool is used to push a plastic locking tab inward.
- Reinstallation: All components are reinstalled in the reverse order of removal. Proper tightening torque is crucial for all fasteners to prevent future issues. The specified tightening torque is 1.8 lb-ft (22 lb-in or 2.5 N.m).
- Final Inspection: After reassembly, the operation of the tail lamps is inspected to confirm the repair.
Required Parts and Warranty Information
The primary part involved in this repair is the Lamp Assy-Center Garnish, which has part numbers 92409-P1050 and 92409-PI150. Only one unit is required for replacement.
Warranty claims for this procedure should be submitted as a “Campaign” type. The operation codes are 50DV08R0 and 50DV08R1, with an estimated operation time of 0.5 hours. The causal parts are 92409 P1050 and 92409 PI150. Technicians are required to submit repair justification photos, including the VIN and mileage, as per Hyundai's Digital Documentation Policy. If a part is replaced under warranty, a separate claim is submitted. For out-of-warranty parts, a Prior Approval request for goodwill consideration is needed.
Owner Action
If you own a 2025 Hyundai Ioniq 5 and notice that the LEDs on your inner rear combination lamp are not functioning correctly, it is recommended to contact an IONIQ certified dealer. Due to the specialized nature of IONIQ repairs, only these certified facilities can perform the necessary inspection and replacement as outlined in TSB 25-BE-011H.
Source: NHTSA ID: 11018893
Galeria
12 imagens
Frequently Asked Questions
- What is Hyundai TSB 25-BE-011H about?
- Hyundai TSB 25-BE-011H addresses a condition in certain 2025 Hyundai Ioniq 5 vehicles where some or all LEDs in the inner rear combination lamp may be inoperative. It provides instructions for inspection and replacement.
- Does the inoperative 2025 Hyundai Ioniq 5 inner rear lamp affect brake lights or turn signals?
- No, the TSB explicitly states that the inoperative LEDs are part of the auxiliary lamp circuit and do not affect the functionality of the brake or turn signal operation.
- Can any Hyundai dealer perform the repair for the 2025 Hyundai Ioniq 5 inner rear lamp issue?
- No, Hyundai specifies that "IONIQ repairs can only be performed at IONIQ certified dealers" to avoid potential damage to IONIQ vehicles.
- What parts are replaced for the 2025 Hyundai Ioniq 5 inner rear lamp issue?
- The primary part replaced is the "Lamp Assy-Center Garnish" with part numbers 92409-P1050 or 92409-PI150.
- How is the 2025 Hyundai Ioniq 5 inner rear lamp issue diagnosed?
- Diagnosis involves a specific test where a technician uses the key fob to cycle the rear tail lamps on and off 15 times while observing the inner rear combination lamp LEDs for proper operation.
Related Articles
2025 Hyundai Ioniq 5 No Start/Ready Mode TSB 26-BE-009H
Hyundai Technical Service Bulletin 26-BE-009H addresses a "NO START OR UNABLE TO ENTER READY MODE" condition in some 2025 Ioniq 5 (NEA EV) vehicles. This TSB outlines the procedure to inspect and potentially replace the Body Domain Control (BDC) module.
2025-2026 Hyundai Ioniq 5/Ioniq 9 Front Motor Noise TSB
Hyundai has issued Technical Service Bulletin 26-01-029H (Campaign LA9) for 2025 Ioniq 5 and 2026 Ioniq 9 vehicles. This bulletin addresses a high-frequency noise from the front motor area during low-speed deceleration, detailing the replacement of the front motor and reduction gear assembly.
2025 Hyundai Ioniq 5 Automatic Wipers Inoperative TSB
Hyundai has issued Technical Service Bulletin 26-BE-006H for certain 2025 Ioniq 5 vehicles experiencing inoperative automatic front wipers. This issue is often caused by a contaminated rain sensor lens and requires inspection and potential replacement.
2025 Hyundai Ioniq 5 HV Battery Charging Issue TSB
Hyundai has issued Technical Service Bulletin (TSB) 26-EV-002H for certain 2025 Ioniq 5 vehicles. This TSB addresses a condition where a voltage difference between battery cells prevents the High Voltage Battery from fully charging, often indicated by DTCs P1AA700 or P1AD300.
2025 Hyundai Ioniq 5 MGDU Noise Service Campaign 25-01-056H
Hyundai's Service Campaign 25-01-056H addresses a potential noise issue in the Motor-Gear Drive Unit (MGDU) of certain 2025 Ioniq 5 vehicles. This is caused by a missing wave washer, requiring replacement of the MGDU assembly.
Leave a comment
Comments are moderated and may take a moment to appear. Only your first name and the initial of your last name are shown publicly.
Comments
Be the first to comment.