2021-2023 BMW X7 Rear Wheelwell Crack TSB
A manufacturer communication, NHTSA ID 10238074, addresses a potential issue in 2021-2023 BMW X7 vehicles where prolonged body flex can lead to a small indentation or crack in the right rear wheelwell. This can cause water ingress and increase the risk of corrosion.

Also applies to
- BMW X7
- 2022–2023
BMW has issued manufacturer communication 10238074 to address a potential concern in certain 2021-2023 BMW X7 vehicles. This communication highlights how normal vehicle operation can lead to issues with the body structure, specifically in the right rear wheelwell.
Symptoms
Owners of affected BMW X7 vehicles may not immediately notice symptoms, as the issue primarily involves the vehicle's underlying body structure. However, the manufacturer communication describes the potential for:
- A small indentation and/or a crack forming in the body sheetmetal of the right rear wheelwell.
- Potential water ingress into the vehicle's structure.
- An increased risk of corrosion in the affected area due to water intrusion.
Diagnosis and Trigger Conditions
The root cause described in manufacturer communication 10238074 is "prolonged, normal body flex acting on the vehicle during its service life." This means that the regular stresses and movements the vehicle undergoes during driving can, over time, contribute to the formation of a BMW X7 rear wheelwell crack.
Technicians would typically inspect the right rear wheelwell area for any visible signs of indentation or cracking. Special attention would be paid to the body sheetmetal to identify any breaches that could allow water to enter.
Repair Procedure Summary
While specific repair steps are not detailed in the summary, the intent of manufacturer communication 10238074 is to address the BMW X7 rear wheelwell crack to prevent further issues. The repair would likely involve inspecting the affected area, repairing any indentations or cracks in the body sheetmetal, and ensuring proper sealing to prevent water ingress. This process aims to mitigate the risk of corrosion and maintain the structural integrity of the vehicle.
Owner Action
If you own a 2021-2023 BMW X7 and are concerned about a potential BMW X7 rear wheelwell crack or related issues like water ingress or corrosion, it is advisable to contact your authorized BMW dealership. They can inspect your vehicle and determine if it is affected by the conditions described in manufacturer communication 10238074 and perform any necessary repairs.
Source: NHTSA ID: 10238074
Frequently Asked Questions
- What is manufacturer communication 10238074 about?
- Manufacturer communication 10238074 from BMW addresses the potential for a small indentation or crack to form in the body sheetmetal of the right rear wheelwell in 2021-2023 BMW X7 vehicles due to normal body flex.
- What are the potential consequences of a BMW X7 rear wheelwell crack?
- A crack in the BMW X7 rear wheelwell can lead to potential water ingress, which in turn increases the risk of corrosion in the affected body structure.
- Which BMW X7 model years are affected by this issue?
- This manufacturer communication specifically pertains to BMW X7 vehicles from the 2021, 2022, and 2023 model years.
- Should I be concerned about corrosion in my BMW X7?
- If your 2021-2023 BMW X7 develops a crack in the right rear wheelwell, there is an increased risk of corrosion due to water entering the body structure. It is recommended to have your vehicle inspected by a BMW dealership.
Related Articles
2021-2024 BMW X7 3rd Row Seat Cannot Fold Down TSB
BMW has issued Service Information Bulletin SIB 52 09 20 for 2021-2024 X7 models addressing issues where the 3rd row head restraints or backrests cannot be folded down. The TSB outlines a repair for bolt bushing movement and LNV motor replacement.
2021-2024 BMW X7 Third-Row Seat & Headrest Folding Issues
If your 2021-2024 BMW X7's third-row seats or headrests are not folding down, you're not alone. This manufacturer communication addresses common concerns regarding the functionality of the third-row seating system, providing insights into potential causes and remedies.
2021-2024 BMW DRL Headlight Moisture SIB 63 11 23
BMW Service Information Bulletin SIB 63 11 23 addresses moisture and condensation in the Daytime Running Light (DRL) headlights of 2021-2024 BMW X7, 7 Series, and XM models. It distinguishes between normal, environmentally caused condensation and defects requiring warranty repair.
2021-2024 BMW Bluetooth Malfunctions SIB 65 28 23
BMW has released Service Information Bulletin SIB 65 28 23 to address various Bluetooth malfunctions and disconnections in the HU-H4 head unit for 2021-2024 models. This TSB outlines a software update to resolve issues like inability to connect, stream music, or automatic reconnection.
2021-2023 BMW Driver Assistance System Complaints TSB
BMW has released a Technical Service Bulletin (TSB 10235204) for various 2021-2023 models, including the X7, iX, 7 Series, and X1, concerning customer complaints related to camera-based driver assistance systems (ADCAM). This TSB addresses potential issues and provides guidance for diagnosis and…
Leave a comment
Comments are moderated and may take a moment to appear. Only your first name and the initial of your last name are shown publicly.
Comments
Be the first to comment.