2021 BMW X3 Gesture Control Malfunction TSB
BMW has issued a Technical Service Bulletin (TSB) regarding a permanent malfunction of the Gesture Control function in 2021 BMW X3 and other models. This issue, identified by NHTSA ID 10205093, is attributed to high temperature fluctuations affecting the system.

Also applies to
- BMW 530e
- 2021
- BMW 530i
- 2021
- BMW 540i
- 2021
- BMW M3
- 2021
- BMW M550i
- 2021
- BMW X4
- 2021
- BMW X5
- 2021
- BMW X6
- 2021
▸ Show 2 more▾ Show fewer
BMW has released a Technical Service Bulletin (TSB) concerning a potential issue with the Gesture Control function in several 2021 models, including the BMW X3. This manufacturer communication, identified as NHTSA ID 10205093, highlights that the Gesture Control system may experience a permanent malfunction under certain conditions.
The TSB indicates that the BMW X3 Gesture Control malfunction is linked to environmental factors. Owners of affected vehicles may notice a complete loss of this feature, impacting convenience and interaction with the infotainment system.
Symptoms
The primary symptom owners will experience is that "The BMW Gesture Control function may fail permanently." This means the system will no longer respond to hand gestures for controlling various vehicle functions, such as adjusting volume or accepting calls.
Diagnosis / Trigger Conditions
According to the TSB, the permanent failure of the Gesture Control function is a direct result of high temperature fluctuations. These variations in temperature can negatively impact the system's components, leading to its malfunction.
What Owners Should Know
This manufacturer communication, NHTSA ID 10205093, identifies the cause of the BMW X3 Gesture Control malfunction but does not specify a detailed repair procedure within the provided summary. If you are experiencing a permanent malfunction of your Gesture Control system, it is advisable to contact your authorized BMW dealership. They can diagnose the issue and determine the appropriate steps for resolution based on the latest service information.
Source: NHTSA ID 10205093
Frequently Asked Questions
- What causes the BMW X3 Gesture Control malfunction?
- The BMW X3 Gesture Control malfunction is caused by high temperature fluctuations, which can lead to a permanent failure of the system, as noted in manufacturer communication NHTSA ID 10205093.
- Is there a recall for the BMW X3 Gesture Control malfunction?
- This issue is addressed by a manufacturer communication (NHTSA ID 10205093), not a safety recall. Owners experiencing the issue should contact their BMW dealer for diagnosis and potential solutions.
Related Articles
2021 BMW X3 / X4 Active PDC Undesired Braking TSB
BMW has released Service Information Bulletin SIB 66 17 19 to address an issue where 2021 BMW X3 and X4 vehicles may experience undesired braking when reversing on an incline with Active Park Distance Control (PDC) engaged. This TSB outlines a software correction for the PDC control unit.
2021 BMW X3/X4 Knee Airbag Wiring Harness Extended Warranty
BMW has announced an extended limited warranty for the knee airbag wiring harness in certain 2021 BMW X3 and X4 vehicles. This extension addresses potential chafing issues that can lead to airbag warning lights and specific fault codes, covering repairs for 10 years or 120,000 miles.
2021-2022 BMW X3 Rear Cargo Rails Delivery Stop
BMW has issued a Delivery Stop, SIB 51 28 24, for certain 2021-2022 BMW X3 models (F97, G01) due to an insecure screw connection for the rear cargo rail bolts. This affects vehicles previously subject to Recall 24V-534. Dealers are instructed not to deliver or sell affected vehicles until repaired.
2021-2024 BMW M Front Strut Noise TSB 31 01 24
BMW has issued Service Information Bulletin 31 01 24 for 2021-2024 M models (X3, X4, M2, M3, M4) addressing a 'cracking or clicking type noise' from the front struts. This bulletin clarifies that the noise is a normal operating sound of the thrust bearing and does not require parts replacement.
2018-2021 BMW X3/X4 Knee Air Bag Wiring Harness Repair
BMW SIB 65 01 22 details a repair for knee airbag warning lights and fault codes (930949, 93094F, 93094C, 930952) in 2018-2021 BMW X3 and X4 models. The issue stems from chafed wiring harnesses. This bulletin outlines the diagnostic and repair steps.
Leave a comment
Comments are moderated and may take a moment to appear. Only your first name and the initial of your last name are shown publicly.
Comments
Be the first to comment.