2024-2025 Audi A3 Parking Aid Warning TSB
Audi has released Technical Service Bulletin 2078645/1 for 2024-2025 Audi A3 models experiencing parking aid warnings when the steering wheel is turned to full lock. This TSB outlines a software update to the parking aid control unit to resolve the issue.

S'applique également à
- Audi A3
- 2024–2025
- Audi RS 3
- 2024
- Audi S3
- 2025
Symptoms of the Parking Aid Warning
Owners of 2024-2025 Audi A3 vehicles may encounter an unexpected parking aid warning. This warning typically appears when the steering wheel is turned to its full lock position, even when there are no identifiable obstacles nearby. The issue stems from the driver assist systems related to parking aid, park assist, and rear traffic alert functionalities.
Specific complaints noted in TSB 2078645/1 include:
- Parking aid functionality switching on by itself.
- Obstacle detection giving an incorrect reading, specifically for optical or acoustic obstacle signals.
- Parking aid functionality activating too early or without cause.
Important Warnings
NOTICE: This TSB does not apply if the complaint also occurs when the steering wheel is not turned to full lock!
If a customer declines the required software update, they must be informed that this decision could lead to issues or restrictions with the use of the vehicle or individual components. It is crucial to make a note of this on the repair order before it is signed and to include this information in the customer's file.
Diagnosis
When diagnosing this issue, technicians will attempt to reproduce the complaint by turning the steering wheel to full lock. It has been observed that there are no relevant event memory entries stored in the parking aid control unit -J446- related to this specific condition. This absence of fault codes helps confirm the problem's nature as a software anomaly rather than a hard component failure.
Technical Background
Audi has identified the root cause of this parking aid warning as a software issue within the vehicle's assistance systems. This software anomaly affects the proper operation of the parking aid control unit, leading to the erroneous warnings. A production solution, identified as CW35/2024, has been developed to address this problem.
Repair Procedure Summary
To resolve the Audi A3 parking aid warning, the parking aid control unit -J446- (diagnostic address 0076) requires a software update. This update is performed via the Software Version Management (SVM) system. Technicians will use an ODIS tester and enter the specific SVM code 76A022 in "Flash" mode to initiate the update process. All instructions provided on the ODIS tester must be followed carefully. Additionally, technicians must refer to TSB 2011732: 00 Software Version Management (SVM), operating instructions, for comprehensive guidance on performing SVM updates.
Required Tools or Parts
To perform the software update for TSB 2078645/1, the following are necessary:
- ODIS Tester: For diagnostic and programming functions.
- SVM Code 76A022: The specific code required to initiate the software update for the parking aid control unit.
- TSB 2011732: This bulletin provides detailed operating instructions for Software Version Management (SVM) procedures.
- Parking aid control unit -J446- (Diagnostic address 0076): The target control unit for the software update, which currently has software version 0997.
Warranty Information
This Technical Service Bulletin 2078645/1 is applicable for warranty claims under specific conditions. If the vehicle is outside of any applicable warranty, this bulletin serves as informational guidance only. All warranty claims must adhere to the Audi Warranty Policies and Procedures Manual.
- Service Number: 9174
- Damage Code: 0039
- Labor Operations: Software update (code 0151 0010). Refer to the Service Repair Time (SRT) for associated operations.
- Diagnostic Time: Software update (code 0151 0060). The time stated on the diagnostic protocol should be used.
- Claim Comment: As per TSB 2078645/1.
Owner Action
If your 2024-2025 Audi A3 is experiencing a parking aid warning when the steering wheel is turned to full lock, contact your authorized Audi dealership. Describe the symptoms to them, referencing Technical Service Bulletin 2078645/1. The dealership will perform the necessary software update to the parking aid control unit to resolve this issue.
NHTSA ID: 10255535
Frequently Asked Questions
- What is Audi TSB 2078645/1 about?
- Audi Technical Service Bulletin (TSB) 2078645/1 addresses an issue in 2024-2025 Audi A3 vehicles where the parking aid system displays a warning when the steering wheel is turned to full lock, even without any obstacles present. It outlines a software update to correct this.
- What causes the parking aid warning in my Audi A3?
- The parking aid warning in your Audi A3 when the steering wheel is at full lock is caused by a software issue within the parking aid control unit -J446-. This software anomaly can lead to incorrect readings or activations of the parking assist system, such as the system switching on by itself or activating too early.
- How is the parking aid warning fixed according to TSB 2078645/1?
- The fix involves updating the software of the parking aid control unit -J446- using the Software Version Management (SVM) system. A technician will use an ODIS tester and the SVM code 76A022 to perform the necessary software update, following instructions in TSB 2011732.
- Is this parking aid warning repair covered by warranty?
- If your 2024-2025 Audi A3 is still under warranty, this software update should be covered. If the vehicle is outside of its warranty period, this Technical Service Bulletin is for informational purposes only, and costs may apply. All warranty claims must comply with Audi's warranty policies.
- What should I do if my Audi A3 shows a parking aid warning when turning the steering wheel to full lock?
- You should contact your authorized Audi dealership to schedule an appointment. Inform them about the issue and mention Technical Service Bulletin 2078645/1, which specifically addresses the Audi A3 parking aid warning under these conditions.
Related Articles
2024-2025 Audi MMI Emergency Call Fault Software Update TSB
Audi Technical Service Bulletin 2081007/1 addresses MMI function problems and 'Emergency call fault' messages in 2024-2025 Audi A3, S3, RS 3, and Q3 models. A software update for the MMI, OCU, and gateway modules resolves these issues.
2022-2025 Audi Pre Sense Warning, Jolt, or Braking TSB
Audi has released Technical Service Bulletin 2069662/3 to address customer complaints of false 'Audi pre sense' warnings, warning jolts, or unexpected brake engagement in 2022-2025 Audi A3, S3, and RS 3 models. This TSB outlines diagnostic steps for technicians.
2023-2024 Audi A3 / S3 / RS 3 P0A8200 Cooling Fan Fault
Audi has issued Technical Service Bulletin (TSB) 2080516/1 for 2023-2024 A3, S3, and RS 3 models equipped with the 48V MHEV system. It addresses the 'Vehicle electrical system fault' message and diagnostic trouble code P0A8200, related to the hybrid battery cooling fan or low battery charge.
2024-2025 Audi A3, S3, RS 3 Air Flow Intensity Issue TSB
Audi has issued Technical Service Bulletin 2074919/3 for 2024-2025 A3, S3, and RS 3 models regarding a concern where the air flow intensity does not change when the blower level is set higher than 4 in manual AC mode. This is a known software issue.
2021-2026 Audi A3/S3/RS3/Q3 Tire Pressure Warning TSB
Audi has released Technical Service Bulletin 2075088/2 to address false tire pressure warnings in the instrument cluster for 2021-2026 A3, S3, RS3, and Q3 models. This issue can be caused by dirt or foreign objects affecting the ABS speed sensors.
Leave a comment
Comments are moderated and may take a moment to appear. Only your first name and the initial of your last name are shown publicly.
Comments
Be the first to comment.