Toyota · Model Report
Showing safety data for the 2024 model year only.
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2024-2027 Toyota Land Cruiser Hybrid vehicles. The fuel tube connection near the fuel tank may disconnect and leak fuel.
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2025 Lexus UX Hybrid, 2024 Lexus GX, Toyota Mirai, and 2024-2025 Toyota Land Cruiser Hybrid vehicles. The instrument panel cluster combination meter may fail to display certain warnings or indicators. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 101, "Control and Displays" and in addition, for the subject Mirai vehicles, FMVSS 305, "Electric-powered vehicles: Electrolyte Spillage and Electrical Shock Protection."
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2024-2025 Toyota Tundra, Tacoma Hybrid, Tacoma, RAV4 Hybrid, Land Cruiser Hybrid, Lexus GX550, 2024-2026 Tundra Hybrid, 2025 Sequoia Hybrid, Crown Signia, Grand Highlander, Lexus TX500 Hybrid, Lexus NX350 Hybrid, 2025-2026 Grand Highlander Hybrid, and Lexus TX350 vehicles. The load carrying capacity modification label may display inaccurate added weight values. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 110, "Tire Selection and Rims."
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2022-2026 Toyota, Lexus, and Subaru Solterra vehicles equipped with a Panoramic View Monitor (PVM) system. Please see the recall report for a complete list of models. A software error may cause the rearview camera to freeze or display a blank screen when the vehicle is in reverse. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 111, "Rear Visibility."
Gulf States Toyota, Inc. (GST) is recalling certain Toyota 2023 GR Supra, 2024 4 Runner, Corolla, Grand Highlander, Grand Highlander Hybrid, Land Cruiser Hybrid, Tacoma, Tacoma Hybrid, 2023-2024 BZ4X, Corolla Cross Hybrid, GR Corolla, GR86, Highlander, Highlander Hybrid, Prius, Prius Prime, Sequoia Hybrid, Tundra, Tundra Hybrid, Venza Hybrid, 2023-2025 Crown, and 2025 Camry Hybrid vehicles equipped with GST accessories. The load carrying capacity modification label may display inaccurate added weight values. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 110, "Tire Selection and Rims."
We have experienced three issues which are safety related with our 2024 Toyota Landcruiser. I have taken these issues to our local Toyota dealer in [XXX]. They have not been able to correct these issues. I have reported these issues to Toyota customer care. They have not been able to resolve these issues. Issue 1. Occasionally, when I back the vehicle, the navigation display unit will go black for around 45 seconds thus blinding me from seeing what is behind me. This happened three times in a recent 30-day period. Issue 2. Three times since we bought this vehicle in XXX, the instrument cluster will go dark which causes me not to be able to see the speed or other instrumentation of the vehicle. Issue 3. About 50% of the time, the navigation display will not display driving directions from our cell phones. This causes us to have to pull over to the side of the road until we can get the navigation display to show driving directions. We have the latest software updates on our iPhones and we have our iPhones tethered to the display. The local [XXX] Toyota dealer and Toyota customer care say there are no recalls regards the navigation display or the instrument cluster of my 2024 Toyota Landcruiser. However, here is a recall notice I got directly from Toyota's website. [XXX] "[XXX] (XXX) — Toyota is conducting a safety recall involving certain model year 2024-2025 Land Cruiser, Mirai, Lexus UX, and GX vehicles in [XXX]. Approximately 82,000 vehicles are involved in this recall in the [XXX] Some areas of the 12.3-combination meter display may become blank during startup and would not show some warnings/indicators to the driver. This causes the vehicles not to meet federal safety requirements. Continued driving with these warnings not displayed could delay the driver taking an appropriate action and increase the risk of a crash or injury." INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
No injuries · No fire · No crash
Hitch-mounted bike rack triggers false PKSB (Parking Support Brake) auto-braking when reversing. All four tires skid, bikes experience tremendous torque on the rack, and cargo inside the vehicle shifts heavily. No actual obstacle present. Tow/haul mode does not reliably prevent it. This is a safety defect. Uncommanded braking can cause rear-end collisions. Owner is located in the United States. Multiple Land Cruiser forum owners report the same issue with hitch-mounted bike racks and false auto-braking.
No injuries · No fire · No crash
Fog Lights (Rigid Industries Version) significantly shake during normal street driving conditions. Any minor bumps on the road cause a shudder like movement from the fog lights that is distracting while driving and potentially blinding to oncoming drivers as the lights flash up and down. Vehicle was taken to Beaver Toyota and inspected for this concern, the technician inspected the fog lights and stated that there was nothing wrong. The vibration / shake from the fog lights is well documented as a concern in online forums, however, everyone seems to get the same response from Toyota. It seems other Land Cruiser owners with the same fog light package have no issues with shake while others have the same issue described above, making me believe that there is a defect with some models fog lights, the housings, brackets, or bumper assembly. This needs to be solved from Toyota, not only is it distracting while driving, it makes me want to not use the fog lights at all. For a $70k+ vehicle, the movement from the fog lights should not be "normal".
No injuries · No fire · No crash
I purchased a Maxi-Cosi Peri 180 infant car seat and discovered what I believe may be a defect in the carrier-to-base locking mechanism. When the infant carrier is installed in the base and appears to be fully latched, the rear of the carrier can lift out of its locking slot with gentle upward pressure without using the release handle. The front of the carrier remains attached, but the rear partially disengages from the base. The child’s safety may be put at risk because the carrier does not appear to remain fully secured to the base during normal handling. I am concerned that if the rear of the carrier can partially disengage this easily, it could affect the seat’s performance during sudden braking or a crash. The car seat is available for inspection upon request. At the time of this report, the car seat has not been inspected by the manufacturer, law enforcement, insurance representatives, or any other third party. I have contacted the manufacturer regarding my concerns and am awaiting their response. The seat was installed according to the manufacturer’s instructions, and the issue was repeatable after verifying proper installation. we have videos explaining/showing this as well.
No injuries · No fire · No crash
The contact owns a 2024 Toyota Land Cruiser Hybrid. The contact stated that while driving 80 MPH, the vehicle started leaning to the left and the right. The vehicle then overcorrected and abruptly swerved to the left and right again. The contact was concerned about the failure occurring while driving at higher speeds. There was no warning light illuminated. The dealer was not notified of the failure. The vehicle was not repaired. The manufacturer was notified of the failure. The failure mileage was 30,000.
No injuries · No fire · No crash