Infiniti Q45 Recalls

11 recalls on file.

• Recall12V079000February 28, 2012
  AIR BAGS:SIDE/WINDOW

  NISSAN IS RECALLING CERTAIN MODEL YEAR 2003-2005 INFINITI Q45 VEHICLES. A WIRING CONNECTOR FOR THE SEAT MOUNTED AIRBAG MAY EXPERIENCE INCREASED ELECTRICAL RESISTANCE, RESULTING IN THE NON-DEPLOYMENT OF THE SIDE AIR BAGS.

  Remedy

  NISSAN WILL NOTIFY OWNERS, AND DEALERS WILL MODIFY THE WIRING CONNECTOR, FREE OF CHARGE. THE SAFETY RECALL BEGAN ON MARCH 19, 2012. OWNERS MAY CONTACT NISSAN CUSTOMER SERVICE AT 1-800-647-7261.

• Recall06V395000October 13, 2006
  EXTERIOR LIGHTING:BRAKE LIGHTS

  CERTAIN VEHICLES FAIL TO COMPLY WITH THE STOP LAMP AND REFLEX REFLECTOR REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 108, 'LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT."

  Remedy

  DEALERS WILL REPLACE THE REAR COMBINATION LAMP ASSEMBLIES FREE OF CHARGE. THE RECALL IS EXPECTED TO BEGIN ON OR ABOUT APRIL 16, 2007. OWNERS MAY CONTACT INFINITI AT 1-800-662-6200.

• Recall05V374000August 29, 2005
  CHILD SEAT:LATCH STRAP

  CERTAIN PASSENGER VEHICLES EQUIPPED WITH POWER REAR SEATS FAIL TO CONFORM TO THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 225, "CHILD RESTRAINT ANCHORAGE SYSTEMS." THE LOWER ANCHORAGE BRACKETS IN THE REAR SEATS DO NOT MEET THE LOCATION REQUIREMENT IN THIS STANDARD. THIS MAY CAUSE DIFFICULTY IN ATTACHING SOME CHILD SEATS TO THESE BRACKETS.

  Remedy

  DEALERS WILL REPLACE THE LOWER ANCHORAGE BRACKETS WITH MODIFIED ONES TO ENSURE THAT THE STANDARD IS MET. THE RECALL BEGAN ON OCTOBER 17, 2005. OWNERS MAY CONTACT INFINITI AT 1-800-662-6200.

• Recall04V497000October 13, 2004
  EXTERIOR LIGHTING:BRAKE LIGHTS:SWITCH

  ON CERTAIN PASSENGER VEHICLES, THE BRAKE LAMP SWITCH MAY MALFUNCTION.

  Remedy

  DEALERS WILL REPLACE THE BRAKE LAMP SWITCH. THE RECALL BEGAN ON OCTOBER 25, 2004. OWNERS SHOULD CONTACT INFINITI AT 1-800-662-6200.

• Recall03V455000November 17, 2003
  ENGINE AND ENGINE COOLING

  ON CERTAIN PASSENGER VEHICLES, THE CIRCUIT BOARD FOR THE CRANK POSITION SENSOR OR CAM POSITION SENSOR MAY HAVE AN IMPROPER SOLDER JOINT DUE TO SOLDER DEFORMATION CAUSED BY HEAT STRESS ACCELERATED BY THE EXISTENCE OF FLUX RESIDUE DURING THE SOLDERING PROCESS.

  Remedy

  DEALERS WILL REPLACE THE CRANK POSITION SENSORS. CAMSHAFT POSITION SENSOR(S), AND IN SOME CASES, THE VARIABLE TIMING CONTROL SENSOR(S). VEHICLES INVOLVED IN A PREVIOUS RECALL CAMPAIGN, 01V357, ARE ALSO INCLUDED IN THIS NEW CAMPAIGN. THE REPLACEMENT SENSORS USED IN THAT CAMPAIGN ARE ALSO AFFECTED. OWNER NOTIFICATION BEGAN ON DECEMBER 22, 2003. OWNERS SHOULD CONTACT NISSAN AT 1-800-647-7261 OR INFINITI AT 1-800-662-6200.

• Recall03V098000March 19, 2003
  WHEELS

  ON CERTAIN PASSENGER VEHICLES EQUIPPED WITH 17 INCH ALLOY WHEELS, THE WHEELS MAY HAVE A CASTING DEFECT FROM WHICH CRACKS COULD PROPAGATE AS THE VEHICLE IS BEING DRIVEN.

  Remedy

  DEALERS WILL REPLACE THESE WHEELS. OWNER NOTIFICATION BEGAN APRIL 28, 2003. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT INFINITI AT 1-800-662-6200.

• Recall02V171000June 24, 2002
  ELECTRICAL SYSTEM:ALTERNATOR/GENERATOR/REGULATOR

  ON CERTAIN PASSENGER VEHICLES, ONE OF THE DIODES USED IN THE ALTERNATOR MAY HAVE BEEN DAMAGED WHEN BUILT. THIS CAN EVENTUALLY RESULT IN FAILURE OF THE DIODE AND AN ELECTRICAL SHORT WHICH COULD MELT THE PLASTIC HOUSING.

  Remedy

  DEALERS WILL REPLACE THE ALTERNATOR. OWNER NOTIFICATION BEGAN JULY 29, 2002. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT NISSAN AT 1-800-647-7261 OR INFINITI AT 1-800-662-6200.

• Recall99V129000May 20, 1999
  ELECTRICAL SYSTEM:ALTERNATOR/GENERATOR/REGULATOR

  VEHICLE DESCRIPTION: PASSENGER VEHICLES. ONE OF THE DIODES USED IN THE ALTERNATOR MAY HAVE BEEN DAMAGED WHEN BUILT. THIS CAN EVENTUALLY RESULT IN FAILURE OF THE DIODE AND AN ELECTRICAL SHORT WHICH COULD MELT THE PLASTIC HOUSING.

  Remedy

  DEALERS WILL REPLACE THE ALTERNATOR.

• Recall98V325000December 14, 1998
  POWER TRAIN:AUTOMATIC TRANSMISSION

  VEHICLE DESRIPTION: PASSENGER VEHICLES. THE IGNITION KEY CAN BE REMOVED WHEN THE ENGINE IS TURNED OFF WITHOUT PLACING THE TRANSMISSION SHIFT LEVER IN THE "PARK" POSITION. THIS DOES NOT COMPLY WITH THE REQUIREMENTS OF FMVSS NO. 102, "TRANSMISSION SHIFT LEVER SEQUENCE, STARTER INTERLOCK, AND TRANSMISSION BRAKING EFFECT."

  Remedy

  DEALERS WILL REPLACE THE SHIFT LOCK CONTROL UNIT.

• Recall98V284000November 5, 1998
  EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC.

  VEHICLE DESCRIPTION: PASSENGER VEHICLES EQUIPPED WITH BOSE REAR SPEAKERS THAT HAVE AN INTEGRAL AMPLIFIER. A CONDUCTIVE BRIDGE CAN FORM BETWEEN TWO LINES OF THE CIRCUIT BOARD PATTERN WHEN THERE IS ACCUMULATED ELECTROLYTE LEAKED FROMA CAPACITOR AND HIGH HUMIDITY CONDITIONS. THIS CAN CLOSE A TRANSISTOR ON THE CIRCUIT BOARD WHICH CAUSES OVERHEATING.

  Remedy

  DEALERS WILL REPLACE THE CIRCUIT BOARD WITH A NEW BOARD THAT HAS BEEN COATED.

• Recall95V103002May 24, 1995
  SEAT BELTS:FRONT:BUCKLE ASSEMBLY

  THE FRONT SAFETY BELT BUCKLE RELEASE BUTTONS CAN BREAK. THESE RED PLASTIC RELEASE BUTTONS ARE MARKED "PRESS." IF A BUTTON BREAKS, PIECES CAN FALL INTO THE BUCKLE ASSEMBLY CAUSING THE BUCKLE TO OPERATE IMPROPERLY.

  Remedy

  OWNERS SHOULD PROMPTLY CHECK THE CONDITION AND OPERATION OF BOTH FRONT SAFETY BELT BUCKLES AND CAREFULLY INSPECT THE RED RELEASE BUTTON FOR ANY BREAKS OR CRACKS. THEY SHOULD ENSURE THAT BOTH BUCKLES ARE OPERATING PROPERLY BY INSERTING EACH LATCH PLATE INTO ITS BUCKLE, TUGGING ON THE BELT TO MAKE SURE THE LATCH IS SECURELY LOCKED, AND THEN PRESSING THE RELEASE BUTTON. THE LATCH PLATE SHOULD POP OUT OF THE BUCKLE WHEN THE BUTTON IS PRESSED. IF EITHER RELEASE BUTTON SHOWS A SIGN OF BREAKING OR CRACKING OR IF EITHER BUCKLE FAILS TO OPERATE PROPERLY, OWNERS SHOULD PROMPTLY CONTACT THEIR AUTHORIZED DEALER TO SCHEDULE AN APPOINTMENT TO HAVE THE BUCKLE REPLACED OR REPAIRED FREE OF CHARGE.