Hyundai Kona Service Bulletins (2022)
69 manufacturer communications on file.
- July 14, 2022•Document ID: 10217250Service Bulletin/Repair InstructionsPOWER TRAIN
- Mfr Comm. #:
- 22-AT-009H
- Date Added:
- August 5, 2022
- Manufacturer:
- HYUNDAI
SummaryIf you are servicing an applicable vehicle with a âCheck Engineâ light on and one or more of the DTC listed on Page 2, follow the repair procedure and perform the diagnosis. If necessary, replace the High Flow electric oil pump (HF EOP) for HF EOP issues or the Dual Clutch Transmission for High Pressure electric oil pump (HP EOP) issues.
Associated Products (9)Associated Documents - June 3, 2022•Document ID: 10215599Service Bulletin/Repair InstructionsSTEERING
- Mfr Comm. #:
- 218/231 amend
- Date Added:
- July 9, 2022
- Manufacturer:
- HYUNDAI
SummaryCertain vehicles may develop a bearing noise within the Motor Driven Power Steering (MDPS) column worm shaft assembly. If bearing noise is heard, follow the procedure in this bulletin to replace the worm shaft bearing.
Associated Products (8)Associated Documents - May 16, 2022•Document ID: 10213726Service Bulletin/Repair InstructionsSTEERING; WHEELS; TIRES
- Mfr Comm. #:
- 22-ST-007H
- Date Added:
- June 10, 2022
- Manufacturer:
- HYUNDAI
SummaryN Vehicles are designed to maximize dynamic steering performance. In normal Ackerman steering geometry, the inner front tire turns more than the outer tire to help cornering in low-speed situations, i.e., parking lot maneuvering or sharp U-turns. N vehicles have a steering geometry optimized for performance driving. The N vehicleâs steering angle difference between the front wheels is reduced to enhance cornering performance. While this helps in high performance driving conditions, it can cause a higher level of tire side scrub that may create a slow shudder or vibration while turning at full steering lock. The feel is similar to turning a 4WD vehicle on dry asphalt when locked in 4WD. This shudder or vibration at parking lot speeds is normal, and no repairs should be performed.
Associated Products (4)Associated Documents - April 8, 2022•Document ID: 10211680Service Bulletin/Repair InstructionsSTEERING
- Mfr Comm. #:
- 22-ST-005H
- Date Added:
- May 10, 2022
- Manufacturer:
- HYUNDAI
SummaryCertain vehicles may develop a bearing noise within the Motor Driven Power Steering (MDPS) column worm shaft assembly. If bearing noise is heard, follow the procedure in this bulletin to replace the worm shaft bearing.
Associated Products (4)Associated Documents - April 8, 2022•Document ID: 10211678Service Bulletin/Repair InstructionsSTEERING
- Mfr Comm. #:
- 22-ST-005H
- Date Added:
- May 10, 2022
- Manufacturer:
- HYUNDAI
SummaryCertain vehicles may develop a bearing noise within the Motor Driven Power Steering (MDPS) column worm shaft assembly. If bearing noise is heard, follow the procedure in this bulletin to replace the worm shaft bearing.
Associated Products (5)Associated Documents - March 31, 2022•Document ID: 10210210Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- 22-01-032H
- Date Added:
- April 8, 2022
- Manufacturer:
- HYUNDAI
SummaryOn certain 2021 Elantra and 2022 Kona vehicles equipped with 2.0L engine, a coolant leak at the Water Temperature Sensor (WTS) may be observed due to machining burrs at the mounting port of the cylinder head, resulting in improper coolant sealing.
Associated Products (2)Associated Documents - January 12, 2022•Document ID: 10207807Service Bulletin/Repair InstructionsPOWER TRAIN; EQUIPMENT
- Mfr Comm. #:
- 22-01-007H
- Date Added:
- February 8, 2022
- Manufacturer:
- HYUNDAI
SummaryCertain vehicles equipped with 7-speed Double Clutch Transmissions (DCT) may exhibit abnormal shifting caused by an out of specification input shaft snap ring. This bulletin outlines the procedures for inspecting for 1-2 or 2-1 shift shock and replacing the input shaft snap ring.
Associated Products (3)Associated Documents - October 1, 2021•Document ID: 10203272Service Bulletin/Repair InstructionsSTEERING
- Mfr Comm. #:
- 21-ST-003H
- Date Added:
- November 6, 2021
- Manufacturer:
- HYUNDAI
SummaryCertain vehicles may develop a bearing noise within the Motor Driven Power Steering (MDPS) column worm shaft assembly. If bearing noise is heard, follow the procedure in this bulletin to replace the worm shaft bearing
Associated Products (5)Associated Documents - June 7, 2021•Document ID: 10199096Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- 21-01-044H
- Date Added:
- July 9, 2021
- Manufacturer:
- HYUNDAI
SummaryThis bulletin provides information related to the ECU (Engine Control Unit) software update for KONA (OS) 2.0L vehicles. This update revises the logic of idle fuel adaptive range to prevent idle combustion instability.
Associated Products (1)Associated Documents