Chevrolet · Model Report
Showing safety data for the 2005 model year only.
CERTAIN SPORT UTILITY VEHICLES FAIL TO CONFORM TO THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 114, 'THEFT PROTECTION.' AN IGNITION KEY PARK LOCK CABLE END FITTING WAS NOT FULLY SEATED ON THE AUTOMATIC TRANSMISSION SHIFTER NAIL HEAD DURING INSTALLATION.
The ABS and traction control light came on and the vehicle sometimes doesn’t want to stop. The ABS kicks in and it takes a while for it to stop. It’s been twice where the vehicle ends up stopping in the middle of the intersection. Luckily no one was in front of us or coming the other direction.
No injuries · No fire · No crash
The front Uni body to front engine/ transmission subframe mount area on left front and right front has rusted away the front 2 subframe mounting points are not connected to the uni body structure anymore due to corrosion damage causing a clunking noise while driving
No injuries · No fire · No crash
Upon purchasing the vehicle from a buy here pay here they did not enclose any possible or current failures or problems with the vehicle. It started with the battery and within 2 months of purchase the check engine light came on. I had previously taken the vehicle to the dealership 3 times to assess the issue in which they repeatedly informed me nothing was wrong even though my check engine light was still on. A month later my CV axel went out and my alignment begin to come out of place. I took the vehicle to an auto shop in which they gave me an estimate of all the issues wrong with the car. I have since done repairs for what was necessary. I then began to look for a recall on the vehicle in which I found that there was a manufacturer recall that was I repaired regarding the Safety lock theft prevention. My ignition switch does not register properly when it is in “off mode”. The engine still runs and numerous attempts to stop it have failed. I contacted the dealership and they have not been willing to work with me in any way. I called the manufacturer number and was directed to a Chevrolet dealership near me in which they told me there are no recalls even though the NHTSA.gov website states there is as well as numerous others but that they have not been repaired. When I place my vehicle in the park position and remove the key from the ignition I am still able to move the gear shift into any selected gear, both with and without the normal brake and the emergency brake. I cannot afford to take it to a shop for repair but did take it to be inspected and was informed that this was an issue along with others and that it could be the reason my battery is not holding the power it needs and why I cannot remove my key sometimes as well as why the engine remains running after switching to the off position and removing my key.
No injuries · No fire · No crash
The contact owns a 2005 Chevrolet Equinox. The contact stated that upon inserting the key into the ignition switch, it failed to function properly. There was no warning light illuminated. The vehicle was taken to the dealer where it was repaired under NHTSA Campaign Number: 04V302000 (POWER TRAIN). However, the failure reoccurred and the vehicle was taken to a second dealer, Countryside Chevrolet (71 Cat Creek Rd, Franklin, NC 28734), where the ignition switch was replaced for a second time under the recall. However, the failure persisted. The contact's daughter was unable to start the vehicle after several attempts. The contact contacted AAA who assisted her daughter to start the vehicle. The contact's daughter was able to continue driving. The manufacturer was notified of the failure but provided no assistance. The failure mileage was approximately 115,000.
No injuries · No fire · No crash
The front sub frame where it bolts to the frame was completely rusted loose on the right side. The left side was barely holding on. This is what holds the motor up and control arms. My mechanics are telling me this is a common problem with Chevy Equinoxes. If it's common why aren't there recalls. My car only has 80,000 miles on it and my mechanic told me to scrap it. I'm a fabricator and welder. I welded a new frame under it but others can't do that and mechanics say it's a no fix.
No injuries · No fire · No crash