Nissan Maxima Service Bulletins (2017)
215 manufacturer communications on file.
- February 27, 2018•Document ID: 10130503Service Bulletin/Repair InstructionsEQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL; POWER TRAIN
- Mfr Comm. #:
- NTB18-017
- Date Added:
- March 26, 2018
- Manufacturer:
- NISSAN
SummaryNISSAN; SERVICE INFORMATION FOR DTCS B2EF0 AND B130C This bulletin applies only to vehicles equipped with Telematics. SERVICE INFORMATION Diagnostic information in the Electronic Service Manuals (ESM) for the following DTCs may be missing or incorrect: -B2EF0 ? INTERNAL BATTERY (CIRC VOLT BELOW THRESHOLD) -B130C ? TCU (Telematics Control Unit) PAIRING ERROR If one of these DTCs is stored, follow the steps listed below along with the Electronic Service Manual (ESM) to compete the required repairs. DTC B2FE0 ? INTERNAL BATTERY (CIRC VOLT BELOW THRESHOLD): 1. Start the engine and let it idle for 30 minutes (to allow charging of the TCU internal battery). -2018 LEAF only: Put the vehicle in Ready to Drive mode (depress the brake pedal and depress the power [?ignition?] switch) for 30 minutes. 2. Verify the DTC can be erased. 3. If the DTC will not erase, replace the TCU. DTC B130C: 1. Collect all keys, and then re-register them to the vehicle. 2. Verify the DTC can be erased. 3. If the DTC will not erase, replace the TCU. NOTE: The related Electronic Service Manuals (ESM) will be updated at a later date. CLAIMS INFORMATION Refer to the current Nissan Warranty Flat Rate Manual and submit a claim for the repairs performed.
Associated Products (23)2018 Nissan Altima2018 Nissan Armada2018 Nissan GT-R2018 Nissan Leaf2018 Nissan Maxima2018 Nissan Murano2018 Nissan Pathfinder2018 Nissan Rogue2018 Nissan Sentra2018 Nissan Titan2017 Nissan Altima2017 Nissan GT-R2017 Nissan Maxima2017 Nissan Murano2017 Nissan Pathfinder2017 Nissan Rogue2017 Nissan Sentra2017 Nissan Titan2016 Nissan Altima2016 Nissan Maxima+ 3 moreAssociated Documents - February 16, 2018•Document ID: 10130490Service Bulletin/Repair InstructionsEQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
- Mfr Comm. #:
- NTB15-049o
- Date Added:
- March 26, 2018
- Manufacturer:
- NISSAN
SummaryTELEMATICS SERVICE INFORMATION This bulletin applies only to vehicles equipped with a Telematics Communication Unit (TCU). This bulletin has been amended. Changes have been made throughout. It is necessary to read the revised procedure(s) in entirety to properly perform the action(s). Please discard previous versions of this bulletin.
Associated Products (23)2018 Nissan Altima2018 Nissan Armada2018 Nissan GT-R2018 Nissan Leaf2018 Nissan Maxima2018 Nissan Murano2018 Nissan Pathfinder2018 Nissan Rogue2018 Nissan Sentra2018 Nissan Titan2017 Nissan Altima2017 Nissan GT-R2017 Nissan Maxima2017 Nissan Murano2017 Nissan Pathfinder2017 Nissan Rogue2017 Nissan Sentra2017 Nissan Titan2016 Nissan Altima2016 Nissan Maxima+ 3 moreAssociated Documents - February 1, 2018•Document ID: 10130496Service Bulletin/Repair InstructionsEQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
- Mfr Comm. #:
- NTB18-008
- Date Added:
- March 26, 2018
- Manufacturer:
- NISSAN
SummaryADAS SYSTEM DTC C1A03, C1A04, AND/OR C1B01 SERVICE INFORMATION This bulletin applies only to vehicles equipped with Automatic Emergency Braking (AEB) or Forward Emergency Braking (FEB). SERVICE INFORMATION If the following ICC/ADAS codes are stored, make sure to follow the diagnostic procedures in the Electronic Service Manual (ESM) before replacing any parts. C1A03 ? VEHICLE SPEED SENSOR -The diagnostic procedure in the ESM includes check and, if needed, repair for ABS DTCs before replacing ADAS components. -If repairs are performed for the ABS system; when compete, perform DTC Confirmation Procedure again before doing any additional repairs. C1A04 ? ABS/TCS/VDC SYSTEM -The diagnostic procedure in the ESM includes check and, if needed, repair for ABS DTCs before replacing ADAS components. -If repairs are performed for the ABS system; when compete, perform DTC Confirmation Procedure again before doing any additional repairs. C1B01 CAM AIMING INCMP -The diagnostic procedure in the ESM includes check and, if needed, repair for LANE CAMERA DTCs before replacing ADAS components. -LANE CAMERA DTC may require adjustment of the lane camera. -If repairs/adjustments are performed for the Lane Camera; when compete, perform DTC Confirmation Procedure again before doing any additional repairs.
Associated Products (14)Associated Documents - January 4, 2018•Document ID: 10128640Service Bulletin/Repair InstructionsEQUIPMENT
- Mfr Comm. #:
- NTB15-049n
- Date Added:
- February 12, 2018
- Manufacturer:
- NISSAN
SummaryTELEMATICS SERVICE INFORMATION This bulletin applies to vehicles equipped with a TCU (Telematics Communication Unit). This bulletin has been amended. A correction was made to the Service Procedure on page 23. No other changes were made. Please discard previous versions of this bulletin.
Associated Products (22)2018 Nissan Altima2018 Nissan Armada2018 Nissan GT-R2018 Nissan Maxima2018 Nissan Murano2018 Nissan Pathfinder2018 Nissan Rogue2018 Nissan Sentra2018 Nissan Titan2017 Nissan Altima2017 Nissan GT-R2017 Nissan Maxima2017 Nissan Murano2017 Nissan Pathfinder2017 Nissan Rogue2017 Nissan Sentra2017 Nissan Titan2016 Nissan Altima2016 Nissan Maxima2016 Nissan Rogue+ 2 moreAssociated Documents - December 18, 2017•Document ID: 10127456Service Bulletin/Repair InstructionsEQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
- Mfr Comm. #:
- NTB17-127
- Date Added:
- January 29, 2018
- Manufacturer:
- NISSAN
SummaryNISSAN; INTELLIGENT KEY INITIALIZATION PROCEDURE STOPS OR WILL NOT CONTINUE SERVICE INFORMATION When the initialization procedure being performed with a new or existing Intelligent Key to an applied vehicle is interrupted (the procedure stops or will not continue), the BCM may be left in learn mode and will not function until it returns to normal mode. Under this condition, the BCM and Intelligent Key(s) will not function normally. If this condition occurs, the BCM must be returned to normal mode and the initialization procedure started over. To get back to the beginning of the Initialization procedure, use one of the following procedures: - Successfully perform the initialization procedure using one of the original Intelligent Keys twice consecutively. - Each successful initialization will follow with two (2) quick tones. OR - When the initialization procedure cannot be successfully performed twice (more than two quick tones), perform the initialization procedure five (5) times using the inoperative ?failed? Intelligent Key. - Initialization does not need to be successful when performed five times. When returning to normal operating mode, the initialization procedure for all Intelligent Keys may be started again.
Associated Products (5)Associated Documents - November 27, 2017•Document ID: 10127474Service Bulletin/Repair InstructionsEQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
- Mfr Comm. #:
- NTB17-118
- Date Added:
- January 29, 2018
- Manufacturer:
- NISSAN
SummaryNISSAN; INTELLIGENT KEY IDENTIFICATION AND REGISTRATION TIPS This bulletin applies to vehicles equipped with Intelligent Key only. SERVICE INFORMATION When replacing or adding an Intelligent Key, it is very important to make sure the correct Intelligent Key is selected from the parts department. - A running change was made that will help identify the correct Intelligent Key. - Beginning in late 2017 and early 2018 the last five digits of the Intelligent Key part number is marked on the Intelligent Key under the mechanical key. - See page 2 for location images of this part number addition. NOTE: - A correct Intelligent Key may or may not have the last five digits of the part number as shown on page 2. - The above running change was applied as a ?help? to identify the correct Intelligent Key for a given vehicle, but the actual part number listed in the parts catalog did not change. - Make sure to use the electronic parts catalog (FAST) or equivalent to confirm the correct Intelligent Key for a given vehicle.
Associated Products (12)Associated Documents - November 21, 2017•Document ID: 10125187Service Bulletin/Repair InstructionsSUSPENSION
- Mfr Comm. #:
- NTB17-040a
- Date Added:
- December 14, 2017
- Manufacturer:
- NISSAN
SummaryREVISED WHEEL ALIGNMENT SPECIFICATIONS This bulletin has been amended to add 2018 Versa Sedan and 2018 Versa Note. No other changes have been made. Please discard previous versions of this bulletin.
Associated Products (22)2018 Nissan Versa2017 Nissan Altima2017 Nissan Frontier2017 Nissan Leaf2017 Nissan Maxima2017 Nissan Murano2017 Nissan NV2017 Nissan Pathfinder2017 Nissan Rogue2017 Nissan Versa2017 Nissan Versa Note2016 Nissan Altima2016 Nissan Frontier2016 Nissan Leaf2016 Nissan Maxima2016 Nissan Murano2016 Nissan NV2016 Nissan NV2002016 Nissan Pathfinder2016 Nissan Rogue+ 2 moreAssociated Documents - November 14, 2017•Document ID: 10126254Service Bulletin/Repair InstructionsEQUIPMENT:ELECTRICAL
- Mfr Comm. #:
- NTB15-049m
- Date Added:
- December 22, 2017
- Manufacturer:
- NISSAN
SummaryTELEMATICS SERVICE INFORMATION This bulletin applies to vehicles that are equipped with a wireless communication device called a Telematics Communication Unit (TCU). This bulletin has been amended. Changes have been made throughout. You must read the entire bulletin to understand all the changed information. Please discard previous versions of this bulletin.
Associated Products (22)2018 Nissan Altima2018 Nissan Armada2018 Nissan GT-R2018 Nissan Maxima2018 Nissan Murano2018 Nissan Pathfinder2018 Nissan Rogue2018 Nissan Sentra2018 Nissan Titan2017 Nissan Altima2017 Nissan GT-R2017 Nissan Maxima2017 Nissan Murano2017 Nissan Pathfinder2017 Nissan Rogue2017 Nissan Sentra2017 Nissan Titan2016 Nissan Altima2016 Nissan Maxima2016 Nissan Rogue+ 2 moreAssociated Documents - October 11, 2017•Document ID: 10123354Service Bulletin/Repair InstructionsEQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
- Mfr Comm. #:
- NTB17-039d
- Date Added:
- November 14, 2017
- Manufacturer:
- NISSAN
SummaryPATHFINDER, ALTIMA, MAXIMA, MURANO; CVT JUDDER AND DTC P17F0 OR P17F1 STORED This bulletin applies to Altima vehicles equipped with a V6 engine only. This bulletin has been amended to change the parts table information on page 101. Please discard previous versions of this bulletin. IMPORTANT: You must read the entire bulletin to properly perform this repair.
Associated Products (15)Associated Documents - October 11, 2017•Document ID: 10123353Service Bulletin/Repair InstructionsEQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
- Mfr Comm. #:
- NTB17-039c
- Date Added:
- November 14, 2017
- Manufacturer:
- NISSAN
SummaryPATHFINDER, ALTIMA, MAXIMA, MURANO; CVT JUDDER AND DTC P17F0 OR P17F1 STORED This bulletin applies to Altima vehicles equipped with a V6 engine only. This bulletin has changed. You must read the entire bulletin to properly perform this repair. Please discard previous versions of this bulletin.
Associated Products (15)Associated Documents - September 28, 2017•Document ID: 10118697Service Bulletin/Repair InstructionsEQUIPMENT:ELECTRICAL:NAVIGATIONAL SYSTEM(GLOBAL POSITIONING SYSTEM)
- Mfr Comm. #:
- NTB15-049L
- Date Added:
- October 12, 2017
- Manufacturer:
- NISSAN
SummaryTELEMATICS SERVICE INFORMATION This bulletin applies to vehicles equipped with a Telematics Communication Unit (TCU). This bulletin has been amended. Information for several 2018 models has been added. No other changes have been made. Please discard previous versions of this bulletin.
Associated Products (21)2018 Nissan Altima2018 Nissan Armada2018 Nissan GT-R2018 Nissan Maxima2018 Nissan Pathfinder2018 Nissan Rogue2018 Nissan Sentra2018 Nissan Titan2017 Nissan Altima2017 Nissan GT-R2017 Nissan Maxima2017 Nissan Murano2017 Nissan Pathfinder2017 Nissan Rogue2017 Nissan Sentra2017 Nissan Titan2016 Nissan Altima2016 Nissan Maxima2016 Nissan Rogue2016 Nissan Sentra+ 1 moreAssociated Documents - September 26, 2017•Document ID: 10118712Service Bulletin/Repair InstructionsSUSPENSION
- Mfr Comm. #:
- NTB17-107
- Date Added:
- October 12, 2017
- Manufacturer:
- NISSAN
Summary2016-2017 MAXIMA AND ALTIMA; POP/CLUNK NOISE FROM REAR WHEN DRIVING OVER BUMPS This bulletin applies to SR trim level Altima vehicles. IF YOU CONFIRM A pop or clunk noise from the rear of the vehicle, especially when driving over bumps, AND The rear suspention connecting rod nuts are found to be loose on the left and/or right side. ACTION Replace the connecting rod and nuts on the left and/or right side with the ones listed in Parts Information.
Associated Products (4)Associated Documents - September 25, 2017•Document ID: 10118691Service Bulletin/Repair InstructionsWHEELS; EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
- Mfr Comm. #:
- NTB11-044b
- Date Added:
- October 12, 2017
- Manufacturer:
- NISSAN
SummaryWHEEL BALANCING SERVICE INFORMATION This bulletin has been amended. The publication date has been revised to include the latest models and model years. No other changes have been made. Please discard previous versions of this bulletin.
Associated Products (138)2018 Nissan Altima2018 Nissan Armada2018 Nissan GT-R2018 Nissan Maxima2018 Nissan Pathfinder2018 Nissan Rogue2018 Nissan Sentra2018 Nissan Titan2018 Nissan Versa2017 Nissan 370Z2017 Nissan Altima2017 Nissan Armada2017 Nissan Frontier2017 Nissan GT-R2017 Nissan Juke2017 Nissan Leaf2017 Nissan Maxima2017 Nissan Murano2017 Nissan Pathfinder2017 Nissan Quest+ 118 moreAssociated Documents - September 12, 2017•Document ID: 10118700Service Bulletin/Repair InstructionsSEATS
- Mfr Comm. #:
- NTB17-017b
- Date Added:
- October 12, 2017
- Manufacturer:
- NISSAN
Summary2016-2017 MAXIMA; NOISE HEARD WHEN LEANING BACK IN A FRONT SEAT This bulletin has been amended. Nissan brand grease is now specified in Step 13 of the SERVICE PROCEDURE and listed in the PARTS INFORMATION. No other changes have been made. Discard all previous versions of this bulletin.
Associated Products (2)Associated Documents - August 29, 2017•Document ID: 10119238Service Bulletin/Repair InstructionsSEATS
- Mfr Comm. #:
- NTB17-017a
- Date Added:
- October 15, 2017
- Manufacturer:
- NISSAN
Summary2016-2017 MAXIMA; NOISE HEARD WHEN LEANING BACK IN A FRONT SEAT This bulletin has been amended throughout. Discard previous versions of this bulletin.
Associated Products (2)Associated Documents - August 23, 2017•Document ID: 10117400Service Bulletin/Repair InstructionsEQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
- Mfr Comm. #:
- NTB15-049k
- Date Added:
- September 14, 2017
- Manufacturer:
- NISSAN
SummaryTELEMATICS SERVICE INFORMATION This bulletin has been amended. The Applied Vehicles section has been revised and TCU Configuration section has been added. No other changes have been made. Please discard previous versions of this bulletin.
Associated Products (16)Associated Documents - August 22, 2017•Document ID: 10117397Service Bulletin/Repair InstructionsPOWER TRAIN
- Mfr Comm. #:
- NTB13-077c
- Date Added:
- September 14, 2017
- Manufacturer:
- NISSAN
SummaryCVT FLUID LEVEL CHECK SERVICE INFORMATION This bulletin applies only to vehicles equipped with a Continuously Variable Transmission (CVT). This bulletin has been amended. The APPLIED VEHICLES section has been revised. No other changes have been made. Please discard all previous versions of this bulletin.
Associated Products (35)2018 Nissan Versa2017 Nissan Altima2017 Nissan Maxima2017 Nissan Murano2017 Nissan Pathfinder2017 Nissan Rogue2017 Nissan Sentra2017 Nissan Versa2017 Nissan Versa Note2016 Nissan Altima2016 Nissan Maxima2016 Nissan Murano2016 Nissan Pathfinder2016 Nissan Rogue2016 Nissan Sentra2016 Nissan Versa2016 Nissan Versa Note2015 Nissan Altima2015 Nissan Murano2015 Nissan Pathfinder+ 15 moreAssociated Documents - August 21, 2017•Document ID: 10119249Service Bulletin/Repair InstructionsSERVICE BRAKES, AIR:SUPPLY:CHECK VALVE
- Mfr Comm. #:
- NTB17-082a
- Date Added:
- October 15, 2017
- Manufacturer:
- NISSAN
SummaryNISSAN; DTC P0456 CAUSED BY EVAP LEAK AT VENT CONTROL VALVE O-RING This bulletin has been amended. The APPLIED VEHICLES and CLAIMS INFORMATION sections have been revised. No other changes have been made. Please discard previous versions of this bulletin.
Associated Products (188)2018 Nissan Armada2018 Nissan Versa2017 Nissan 370Z2017 Nissan Altima2017 Nissan Armada2017 Nissan Frontier2017 Nissan GT-R2017 Nissan Juke2017 Nissan Maxima2017 Nissan Murano2017 Nissan Pathfinder2017 Nissan Quest2017 Nissan Rogue2017 Nissan Sentra2017 Nissan Titan2017 Nissan Versa2017 Nissan Versa Note2016 Nissan 370Z2016 Nissan Altima2016 Nissan Frontier+ 168 moreAssociated Documents - August 16, 2017•Document ID: 10119236Service Bulletin/Repair InstructionsENGINE
- Mfr Comm. #:
- NTB17-008b
- Date Added:
- October 15, 2017
- Manufacturer:
- NISSAN
SummaryNISSAN; OIL LEAKING AROUND VALVE TIMING CONTROL SOLENOID VALVE This bulletin applies only to Maxima, Quest, Altima Coupe, Altima Sedan, Pathfinder and Murano vehicles with a 6-cylinder engine and Titan/Titan XD vehicles with a V8 gasoline engine. This bulletin has been amended. The PARTS INFORMATION section has been revised. No other changes have been made. Please discard previous versions of this bulletin.
Associated Products (25)2017 Nissan Altima2017 Nissan Armada2017 Nissan Maxima2017 Nissan Murano2017 Nissan Pathfinder2017 Nissan Quest2017 Nissan Titan2016 Nissan Altima2016 Nissan Maxima2016 Nissan Murano2016 Nissan Pathfinder2016 Nissan Quest2016 Nissan Titan2015 Nissan Altima2015 Nissan Murano2015 Nissan Pathfinder2015 Nissan Quest2014 Nissan Altima2014 Nissan Pathfinder2014 Nissan Quest+ 5 moreAssociated Documents - August 1, 2017•Document ID: 10117398Service Bulletin/Repair InstructionsEQUIPMENT:ELECTRICAL; EQUIPMENT:ELECTRICAL:NAVIGATIONAL SYSTEM(GLOBAL POSITIONING SYSTEM)
- Mfr Comm. #:
- NTB15-009f
- Date Added:
- September 14, 2017
- Manufacturer:
- NISSAN
SummaryNAVIGATION SYMPTOMS WHEN SD CARD IS MISSING OR WRONG CARD INSTALLED This bulletin has been amended. Changes have been made to the parts table on page 5 under 17.5MY Murano. No other changes were made. Please discard previous versions of this bulletin.
Associated Products (8)Associated Documents