CAN-AM Ryker Service Bulletins (2020)
18 manufacturer communications on file.
- June 6, 2025•Document ID: 11019368OtherUNKNOWN OR OTHER
- Mfr Comm. #:
- TST 144096
- Date Added:
- June 6, 2025
- Manufacturer:
- CAN-AM
SummaryUpon installation of the 2-UP passenger seat, difficulty to install might result in the breakage of the latch.
Associated Products (7)Associated Documents - June 21, 2024•Document ID: 11003267Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; POWER TRAIN; SUSPENSION
- Mfr Comm. #:
- TST 137209
- Date Added:
- July 4, 2024
- Manufacturer:
- CAN-AM
SummaryRYKER YAW Rate - SAS Sensor Faults These 3 faults (C0063 and/or C0051 and *C006C) can be triggered if the front suspension has excessive play or the front wheel alignment is out of specification
Associated Products (3)Associated Documents - April 2, 2024•Document ID: 10254110Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- TST 136437
- Date Added:
- May 3, 2024
- Manufacturer:
- CAN-AM
SummaryRykers 900 engines that may have the incorrect camshaft timing. Ryker Equipped with the 900 engine may start well when cold but then can have a rough idle or even dies at idle when the engine is warmed up.
Associated Products (5)Associated Documents - December 12, 2022•Document ID: 10229607Service Bulletin/Repair InstructionsSUSPENSION; ELECTRONIC STABILITY CONTROL:AUTOMATIC (ASC); ELECTRICAL SYSTEM; SERVICE BRAKES
- Mfr Comm. #:
- TST 137209
- Date Added:
- January 12, 2023
- Manufacturer:
- CAN-AM
SummaryYaw rate sensor faults might be triggered due to loose front suspension components.
Associated Products (5)Associated Documents - November 30, 2022•Document ID: 10226794Service Bulletin/Repair InstructionsEQUIPMENT; VEHICLE SPEED CONTROL
- Mfr Comm. #:
- TST 140638
- Date Added:
- December 1, 2022
- Manufacturer:
- CAN-AM
SummaryThis TST includes solution for the noise that can be heard or felt under deceleration at high speed.
Associated Products (4)Associated Documents - November 16, 2022•Document ID: 10226796Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- Bulletin 2023-2
- Date Added:
- December 1, 2022
- Manufacturer:
- CAN-AM
SummaryThis bulletin is the detailed repair procedure if the position light and flasher electrical harness in the front fenders have rubbed on the tires wearing the insulating sheath.
Associated Products (5)Associated Documents - May 4, 2022•Document ID: 10213476Service Bulletin/Repair InstructionsWHEELS
- Mfr Comm. #:
- Message 140046
- Date Added:
- June 6, 2022
- Manufacturer:
- CAN-AM
SummaryMessage and alert to all dealer RYKER mandatory certification form The front wheel installation is a critical operation and must be performed as explained in the PDI bulletin.
Associated Products (4)Associated Documents - May 12, 2021•Document ID: 10194662Service Bulletin/Repair InstructionsFUEL SYSTEM, GASOLINE
- Mfr Comm. #:
- TST-136739
- Date Added:
- June 3, 2021
- Manufacturer:
- CAN-AM
SummaryFuel Pump can be noisy especially when low fuel levels and warm temperatures.
Associated Products (3)Associated Documents - April 13, 2021•Document ID: 10191570Service Bulletin/Repair InstructionsEXTERIOR LIGHTING
- Mfr Comm. #:
- Bulletin 2021-4
- Date Added:
- May 4, 2021
- Manufacturer:
- CAN-AM
SummaryRepair Procedure Revision- Brake Light Switch Adjustment Vehicle may indicate brake light switch failure, rear brake light stays ON or flashes intermittently.
Associated Products (4)Associated Documents - November 20, 2020•Document ID: 10183375Service Bulletin/Repair InstructionsEQUIPMENT; ENGINE AND ENGINE COOLING
- Mfr Comm. #:
- TST138262
- Date Added:
- December 3, 2020
- Manufacturer:
- CAN-AM
SummaryWe have some report that some 602 and 903 engines have been produced with the wrong camshaft. This document will help you to identify the correct one. If the wrong camshaft is installed the unit can have the following symptoms poor, idle, engine performance, O2 fault, engine misfire.
Associated Products (2)Associated Documents - October 27, 2020•Document ID: 10181946Service Bulletin/Repair InstructionsSUSPENSION
- Mfr Comm. #:
- TST 137209
- Date Added:
- November 3, 2020
- Manufacturer:
- CAN-AM
SummaryYAW rate sensor faults might be triggered due to loose front suspension components.
Associated Products (2)Associated Documents - October 15, 2020•Document ID: 10181962Service Bulletin/Repair InstructionsWHEELS
- Mfr Comm. #:
- 2020-6
- Date Added:
- November 3, 2020
- Manufacturer:
- CAN-AM
SummarySafety Campaign- Possible Front Wheel Loss. The front wheel assembly may not have been performed properly (torque application and installation of the red locking clip).
Associated Products (1)Associated Documents - October 15, 2020•Document ID: 10181959Service Bulletin/Repair InstructionsWHEELS
- Mfr Comm. #:
- 2020-1 Revision
- Date Added:
- November 3, 2020
- Manufacturer:
- CAN-AM
SummarySafety Campaign Revision- Wheel nut may crack. One or more wheel nuts may crack resulting in a reduced clamping force. New VINs added in the warranty campaign and new steps in the procedure.
Associated Products (2)Associated Documents - June 20, 2020•Document ID: 10176805Service Bulletin/Repair InstructionsSERVICE BRAKES, HYDRAULIC; ELECTRICAL SYSTEM
- Mfr Comm. #:
- Bulletin 2020-2
- Date Added:
- July 1, 2020
- Manufacturer:
- CAN-AM
SummaryVehicle may indicate brake light switch failure. One of the probable cause is the adjustment of the brake light switch/low pressure switch.
Associated Products (2)Associated Documents - February 3, 2020•Document ID: 10170875Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING; EQUIPMENT ADAPTIVE/MOBILITY; EQUIPMENT
- Mfr Comm. #:
- TST 137262
- Date Added:
- March 2, 2020
- Manufacturer:
- CAN-AM
SummaryThis technical service tips is to show how to fix some leaks coming from the coolant cap area.
Associated Products (2)Associated Documents - December 2, 2019•Document ID: 10170877Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- TST 137241
- Date Added:
- February 5, 2020
- Manufacturer:
- CAN-AM
SummaryPossible contact between the exhaust pipe and frame. Here are some ways to increase the distance between the exhaust pipe and the frame. The minimal distance between the exhaust pipe and the frame should be 5mm. Symptoms Excessive engine vibration felt, exhaust manifold bolts loose, engine rattle noise.
Associated Products (2)Associated Documents - October 3, 2019•Document ID: 10166934Service Bulletin/Repair InstructionsWHEELS; EQUIPMENT ADAPTIVE/MOBILITY
- Mfr Comm. #:
- 2020-1
- Date Added:
- November 5, 2019
- Manufacturer:
- CAN-AM
SummaryOne or more wheel nuts may crack resulting in a reduced clamping force. This could eventually affect the integrity of the wheel assembly and the vehicle's behavior. This may increase the risk of a crash.
Associated Products (2)Associated Documents - October 2, 2019•Document ID: 10171794Service Bulletin/Repair InstructionsSUSPENSION
- Mfr Comm. #:
- PDI 137019
- Date Added:
- March 2, 2020
- Manufacturer:
- CAN-AM
SummaryRyker 2020 Low Torque on FDU The bolts that holds the FDU to the swing arm are not torqued as specification for these vehicles.
Associated Products (1)Associated Documents