BMW 750Li Service Bulletins (2016)
596 manufacturer communications on file.
- May 1, 2017•Document ID: 10136745Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- B840214
- Date Added:
- May 14, 2018
- Manufacturer:
- BMW
SummaryConnectedDrive/BMW Assist System Diagnosis Information
Associated Products (242)Associated Documents - April 1, 2017•Document ID: 10146658Service Bulletin/Repair InstructionsEQUIPMENT
- Mfr Comm. #:
- B840311
- Date Added:
- November 5, 2018
- Manufacturer:
- BMW
Summary"?Telematics Device Spares Replacement Part Activation via DCSnet for BMW Assist What's New: ? Model: All models added along with 6AC option code ? Situation: All information added ? Information: Deleted CDMA related information and added activation of Wi-Fi control unit ? Procedure: Added "Note" regarding ConnectedDrive support hotline information . A replacement telematics control unit must only be activated for vehicles with an active BMW Assist subscription. Note: 2G CDMA and 2G GSM telematics control units cannot be activated because they are no longer supported and the supporting network(s) have been decommissioned. INFORMATION The following changes have taken place: All Telematics control unit replacements must be activated by Part managers via the DCSnet application. New steps included in the procedure for activating Telematics control unit replacements for vehicles equipped with Wi-Fi Hotspot (6WD)."
Associated Products (244)Associated Documents - April 1, 2017•Document ID: 10146656Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- B620617
- Date Added:
- November 5, 2018
- Manufacturer:
- BMW
SummaryINSTRUMENT CLUSTER RESETS. Instrument cluster sporadically flickers and/or fails. Instrument cluster performs spontaneous reset. Instrument cluster software.
Associated Products (6)Associated Documents - April 1, 2017•Document ID: 10146654Service Bulletin/Repair InstructionsEQUIPMENT:ELECTRICAL
- Mfr Comm. #:
- B620417
- Date Added:
- November 5, 2018
- Manufacturer:
- BMW
Summary?WRONG OUTSIDE TEMPERATURE DISPLAY. During stop and go or slow driving, with the engine at operating temperature, the ambient outside temperature display deviates in the instrument cluster by up to +10 degrees from the real ambient temperature. Location of ambient temperature sensor. Temperature readings are influenced by: External engine oil cooler. Ambient temperature of operating engine compartment.
Associated Products (2)Associated Documents - April 1, 2017•Document ID: 10146652Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- B613014
- Date Added:
- November 5, 2018
- Manufacturer:
- BMW
Summary"?BMW Maintenance Program: 12-Volt Battery Replacement Measure What's new: ? "Models" updated: Model Year 2017 vehicles added ? "Models" updated: Model Year G12 (7 Series) excluded from program ? "Procedure" updated: N63R engine added to 2016 Model Year G12 (7 Series) ? Attachment updated with G12 (7 Series) production date range for 2016 Model Year. INFORMATION This bulletin outlines a customer satisfaction measure that has been designed exclusively for the BMW vehicles listed above. It involves the replacement of the 12-volt battery as a preventive maintenance measure. This 12-volt battery replacement measure is: Effective for repairs dated on or after January 1, 2015. Applicable to vehicles that are still covered by the BMW Maintenance Program. This program is valid for 4 years or 50,000 miles, whichever occurs first. The calculation is based on the current date of repair. It is "applicable" when the 12volt battery was not replaced within the last 12 months. You can then perform the battery replacement as outlined below. Please check the warranty claim history for the specific vehicle in the DCSnet Warranty Vehicle Inquiry to confirm the battery was not already replaced within the previous 12 months."
Associated Products (70)Associated Documents - April 1, 2017•Document ID: 10146651Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- B612217
- Date Added:
- November 5, 2018
- Manufacturer:
- BMW
SummaryDIAGNOSTIC COMMUNICATION WITH FLEXRAY CONTROL MODULES NOT POSSIBLE. There are no customer complaints associated with this issue. The following control modules do not respond when diagnosing the vehicle with ISTA: Advanced Crash and Safety Management (ACSM) Digital Motor Electronics (DME) Dynamic Stability Control (DSC) Electric Active Roll Stabilization, Rear (EARSH) Electric Active Roll Stabilization, Front EARSV) Electrical Machine Electronics (EME) Electromechanical Power Steering (EPS) Integral Active Steering (HSR) Optional Equipment System (SAS) Vertical Dynamics Platform (VDP) Transfer Box (VTG) CAUSE Body Domain Controller (BDC) diagnostic communication error.
Associated Products (6)Associated Documents - April 1, 2017•Document ID: 10146649Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- B611817
- Date Added:
- November 5, 2018
- Manufacturer:
- BMW
Summary"SME FAULT CODE 21F02A. Upon starting the vehicle, the following CC message is displayed to the customer: "Powertrain malfunction!" (CCM-ID: 633) In addition, one or several of the following CC message(s) may be displayed: "Charging not possible" (CCM-ID: 804), "Hybrid system malfunctioning!" (CCM-ID: 585), "Drive. No restart" (CCM-ID: 586) or "Engine fault! Power loss" (CCM-ID: 29). Possible hardware defect of the safety box."
Associated Products (35)Associated Documents - April 1, 2017•Document ID: 10146635Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- B340417
- Date Added:
- November 5, 2018
- Manufacturer:
- BMW
Summary"?DSC WARNING LAMP ILLUMINATED AFTER TRANSPORT MODE DEACTIVATION. After vehicle start-up from transport mode, the DSC warning lamp flashes. CC message "driving stabilization restricted" is displayed in the CID. The following faults are entered in the fault memory: 0x482394 EPS control unit: Initialization fault steering angle, loss of multi-turn value. 0x48078B DSC control unit: Initialization fault EPS, adjustment required. The order of transport mode deactivation and steering angle sensor initialization reversed. While in transport mode, the steering angle sensor loses calibration on every terminal change. During the QCI service, transport mode deactivation is supposed to occur prior to steering angle sensor initialization. When this is reversed, calibration is lost."
Associated Products (6)Associated Documents - April 1, 2017•Document ID: 10146634Service Bulletin/Repair InstructionsELECTRONIC STABILITY CONTROL:AUTOMATIC (ASC)
- Mfr Comm. #:
- B340317
- Date Added:
- November 5, 2018
- Manufacturer:
- BMW
SummaryDYNAMIC STABILITY CONTROL FAILURE. Instrument cluster indicates Dynamic Stability Control (DSC) failure. You cannot establish communication with the DSC control unit. Associated control units (DME, ACSM) register DSC-related communication time-outs. After battery reset, DSC operates normally and has no faults registered. Software in the DSC control module.
Associated Products (6)Associated Documents - April 1, 2017•Document ID: 10146631Service Bulletin/Repair InstructionsFUEL SYSTEM, GASOLINE
- Mfr Comm. #:
- B130217
- Date Added:
- November 5, 2018
- Manufacturer:
- BMW
Summary?SERVICE ACTION: CHECK ROUTING OF FUEL LINE. The fuel feed line is not correctly routed behind the tank ventilation line and may conflict with components of the intake system. This may cause abrasion on the protective fabric coating of the fuel feed line.
Associated Products (3)Associated Documents - April 1, 2017•Document ID: 10146628Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- B112216
- Date Added:
- November 5, 2018
- Manufacturer:
- BMW
Summary?"ENGINE OIL PRESSURE" ON LOW MILEAGE CARS. Check Control Message (CCM-212) states: "Engine Oil Pressure. Stop Carefully" The following codes may be stored in the DME fault memory" 1C2002 - Engine oil pump, pressure too low 1FB801 - CCM (ID212) - Oil pressure Also, the vehicle's mileage is very low (below 60 miles), the fault frequency shows only "one" occurrence; faults are not currently present and cannot be reproduced. CAUSE Unfavorable DME software application."
Associated Products (45)Associated Documents - April 1, 2017•Document ID: 10146625Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- B110417
- Date Added:
- November 5, 2018
- Manufacturer:
- BMW
Summary?SERVICE ACTION: REPLACE THE TURBOCHARGER COOLANT LINES (N63R) What's New: ? Labor allowance has been updated. Refer to the Warranty section. ? Alternative Mobility Solutions statement has been updated. Refer to the Warranty section. The coolant lines routed to the exhaust turbochargers may develop an external coolant leak. Hose material not robust enough for prolonged turbocharger temperatures.
Associated Products (1)Associated Documents - March 1, 2017•Document ID: 10146609Service Bulletin/Repair InstructionsLANE DEPARTURE
- Mfr Comm. #:
- B662416
- Date Added:
- November 5, 2018
- Manufacturer:
- BMW
Summary?BLINDSPOT DETECTION WARNING: FALSE ACTIVATION Whats New: ? Correction updated: Check if HC2 sensor shield previously installed ? Procedure updated: Removed the programming step because it is no longer needed ? Parts information updated: Note added to check warranty history before ordering parts . Driver Assistance system issues Blind Spot Detection warnings when no other vehicle is present: Yellow triangle illuminated on the side view mirror housing. Steering wheel vibration activated during lane change. Short steering intervention during lane change after actuation of turn signal. Incorrect detection of Blind Spot Warning sensor (HC2-sensor). The radar waves are incorrectly scattered
Associated Products (2)Associated Documents - March 1, 2017•Document ID: 10146608Service Bulletin/Repair InstructionsEQUIPMENT:ELECTRICAL
- Mfr Comm. #:
- B661016
- Date Added:
- November 5, 2018
- Manufacturer:
- BMW
Summary"?GARAGE DOOR OPENER CANNOT BE PROGRAMMED Whats new: ? ""Model"": G30 (5 Series) added . The vehicle's rear view mirror integrated universal remote control is incompatible with some garage door (or fence) opener devices installed at the driver's residence and/or business. If the garage door opener was manufactured before 1993, it will not be compatible with any HomeLink device. Installing the compatibility bridge will NOT link these units. This is due to several incompatible frequency's used before 1993."
Associated Products (6)Associated Documents - March 1, 2017•Document ID: 10146607Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- B660317
- Date Added:
- November 5, 2018
- Manufacturer:
- BMW
SummaryAUTOMATIC PARK DISTANCE CONTROL ACTIVATES TOO LATE . Automatic Park Distance Control (aPDC) signal is being activated when vehicle is uncomfortably close to obstructions at the corner of the vehicle. Software modification in integration level S15A-16-11-50x.
Associated Products (2)Associated Documents - March 1, 2017•Document ID: 10146606Service Bulletin/Repair InstructionsEQUIPMENT
- Mfr Comm. #:
- B660117
- Date Added:
- November 5, 2018
- Manufacturer:
- BMW
SummaryDISPLAY KEY: SERVICE INTERVAL DISPLAY CHANGES . INFORMATION Replacing Parts or programming the vehicle will not rectify the situation. The display key information was modified, as shown in the graphics below, to eliminate any confusion that may have been caused by inconsistent display of CBS maintenance intervals. The remaining CBS distance and date are now only displayed in the vehicle.
Associated Products (6)Associated Documents - March 1, 2017•Document ID: 10146604Service Bulletin/Repair InstructionsEQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC.
- Mfr Comm. #:
- B650617
- Date Added:
- November 5, 2018
- Manufacturer:
- BMW
Summary?SATELLITE RADIO DETERIORATION IN RECEPTION QUALITY DUE TO NEW CELLULAR FREQUENCIES . INFORMATION Inform the customer that the introduction of these expanded frequencies by the wireless mobile providers may be influencing reception quality. BMW is currently working with the wireless mobile providers in order to improve the quality of reception and help alleviate the issues that are caused by the wireless mobile expanded frequencies. Once we have more information about this situation this service information bulletin will be updated. Currently Satellite Radio is provided by SiriusXM for BMW customers via geosynchronous (GEO) satellites located roughly above the equator. This means that the satellite signal to some parts of the United States can come in at an angle as low as 32 degrees to the horizon. Due to this angle, buildings, hills, trees, highway sound blocking walls or other obstacles might block the satellite signal coming from reaching the vehicle receiver antenna and might cause audio cut outs, unless the wireless provider has installed terrestrial repeaters. Reception quality decreases the further north you travel, as the angle of the incoming signal gets smaller. Also adverse weather conditions might affect reception. At this time, in the event of a customer complaint or inquiry on interference noise: Do not replace any parts Do not program or carry out other work on the vehicle Explain to customer about the new Wireless Communications Service (WCS) signals When investigating Satellite Radio cutouts or a temporary loss of reception: Please compare to a similarly equipped vehicle. Keep in mind the roofline of the vehicle, size of the antenna (sharkfin) and location of the antenna on the vehicle will all affect the strength of the reception. Do not compare a Sport Activity Vehicle (SAV) with a high roofline mounted antenna to a different vehicle such as a coupe or convertible with a much lower mounting point of the antenna. Replace no parts Do not prog
Associated Products (99)Associated Documents - March 1, 2017•Document ID: 10146602Service Bulletin/Repair InstructionsEQUIPMENT
- Mfr Comm. #:
- B650517
- Date Added:
- November 5, 2018
- Manufacturer:
- BMW
Summary?SERVICE ACTION: RETROFITTING REAR AXLE GROUND STRAP FOR RADIO INTERFERENCE . Bad radio reception and strong disruptions in the AM radio band. The ground cable from the rear axle to the body was not installed in the vehicles.
Associated Products (2)Associated Documents - March 1, 2017•Document ID: 10146592Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; STEERING
- Mfr Comm. #:
- B611317
- Date Added:
- November 5, 2018
- Manufacturer:
- BMW
Summary?WINDSHIELD WIPERS IN EMERGENCY MODE . Windshield wipers are always on regardless of the switch position Turn signals and horn are also non-functional. Possibilities include: Faulty steering column switch cluster. Faulty plug connection at switch cluster. Wiring error on switch cluster plug. Damaged wiring harness to the switch cluster.
Associated Products (2)Associated Documents - March 1, 2017•Document ID: 10146588Service Bulletin/Repair InstructionsVISIBILITY:SUN/MOON ROOF ASSEMBLY
- Mfr Comm. #:
- B540117
- Date Added:
- November 5, 2018
- Manufacturer:
- BMW
Summary?GLASS ROOF NOT CLOSING . Glass roof will not close. At least one of the following fault codes is stored: 30215: Slide/tilt sunroof: invalid characteristic curve, no standardization exists 30295: Electric sliding headliner: invalid characteristic curve, no standardization exists 302A0: Electric sliding headliner: System not standardized 30220: Slide/tilt sunroof: System not standardized Roof function center software.
Associated Products (6)Associated Documents