Bentley Flying Spur Service Bulletins (2022)
620 manufacturer communications on file.
- March 4, 2025•Document ID: 11016367Service Bulletin/Repair InstructionsENGINE; FUEL/PROPULSION SYSTEM
- Mfr Comm. #:
- 2064337/3
- Date Added:
- April 2, 2025
- Manufacturer:
- BENTLEY
SummaryUsage of E10 fuel. Condition: In the event a customer asks if E10 fuel can be used, the operative must refer to the Technical background section of this TPI Technical Background: Details on the introduction of E10 fuel which contains 10% ethanol and its usage on Bentley products • All vehicles produced post 1990 Model year can be run using E10 fuel However • All vehicles produced before 1990 Model year MUST NOT use E10 fuel
Associated Products (10)Associated Documents - March 4, 2025•Document ID: 11016361Service Bulletin/Repair InstructionsENGINE
- Mfr Comm. #:
- 2064679/5
- Date Added:
- April 2, 2025
- Manufacturer:
- BENTLEY
SummaryOil leaking from tell tale hole - CDA actuator fixings or Fuel rail fixings or Vaccum assembly fixings - V8 Kovomo.
Associated Products (9)Associated Documents - March 4, 2025•Document ID: 11016047Service Bulletin/Repair InstructionsENGINE; ELECTRICAL SYSTEM
- Mfr Comm. #:
- 2059149/6
- Date Added:
- March 28, 2025
- Manufacturer:
- BENTLEY
SummaryEngine OIl - Consumption - V8 Kovomo. Condition: Engine oil warning lamp illuminated within the Drivers Instrument Panel (DIP) Engine oil requires “topping up” between services Excessive engine oil consumption
Associated Products (9)Associated Documents - March 4, 2025•Document ID: 11016041Service Bulletin/Repair InstructionsENGINE; ELECTRICAL SYSTEM
- Mfr Comm. #:
- 2057978/8
- Date Added:
- March 27, 2025
- Manufacturer:
- BENTLEY
SummaryEngine Lubricating Oil - Replenishment. Condition: Engine lubricating oil lamp illuminated on driver instrument panel. Engine lubricating oil requires “topping up” between services.
Associated Products (10)Associated Documents - March 4, 2025•Document ID: 11016037Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; ENGINE; FUEL/PROPULSION SYSTEM
- Mfr Comm. #:
- 2075331/2
- Date Added:
- March 27, 2025
- Manufacturer:
- BENTLEY
SummaryEngine light in the DIP - Various oxygen sensor / Fuel ratio DTC's logged within the Engine Control Module(s),
Associated Products (10)Associated Documents - March 4, 2025•Document ID: 11015981Service Bulletin/Repair InstructionsENGINE
- Mfr Comm. #:
- 2028794/8
- Date Added:
- March 27, 2025
- Manufacturer:
- BENTLEY
SummaryEngine coolant mixture - Restrictions on use of desalinated water. Technical Background: An important factor of influencing the cooling system efficiency is the water used in the mixture Due to the different ingredients and characteristics existing in each country or even region, Bentley has decided to define the quality of water for cooling systems Demineralised water according to standard VDE 0510 meets all requirements and can be purchased worldwide Therefore undiluted coolant should be mixed in the correct ratio using demineralised water as detailed in Elsa Pro coolant specification, this will detail the ratio and type of coolant to use The use of desalinated water in the engine cooling system is specifically prohibited
Associated Products (10)Associated Documents - March 3, 2025•Document ID: 11016362Service Bulletin/Repair InstructionsENGINE
- Mfr Comm. #:
- 2028808/8
- Date Added:
- April 2, 2025
- Manufacturer:
- BENTLEY
SummaryService info: Engine oil - Specific oil type and oil consumption reference. Condition: Engine oil level requires top up between services Technical Background: The use of the correct oil for each engine type is critical for its continued performance, reliability and ultimately warranty. The workshop manual should always be the first point of reference, ensuring the correct lubricant is used for each specific model year and engine type Should oil be required the parts catalogue must be referred to ensuring the correct VIN is always used when ordering
Associated Products (10)Associated Documents - February 27, 2025•Document ID: 11015372Service Bulletin/Repair InstructionsLANE DEPARTURE: ASSIST; STEERING; ELECTRICAL SYSTEM; LANE DEPARTURE: WARNING
- Mfr Comm. #:
- 2063855/11
- Date Added:
- March 8, 2025
- Manufacturer:
- BENTLEY
SummaryDTC B17B801 and/or B17B804 - evident within address 0019 and/or DTC U112300 evident in 00A5. Condition: • Lane Assist and / or Traffic Assist are not functional • DTC - B17B801 - Steering Wheel Touch Recognition Control Module evident within address 0019 And/or • DTC B17B804 - Steering Wheel Touch Recognition Control Module electrical error - evident within address 0019 And/or • DTC U112300 with symptom Code 1123220 within address 00A5
Associated Products (10)Associated Documents - February 25, 2025•Document ID: 11015427Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; STEERING; SUSPENSION
- Mfr Comm. #:
- 2069252/3
- Date Added:
- March 8, 2025
- Manufacturer:
- BENTLEY
SummaryWarnings within the DIP for the rear steering system - DTC B200096 and/or P060700 evident within diagnostic address 00CB. Customer statement: • Rear Steering Fault warning present within the DIP.
Associated Products (6)Associated Documents - February 24, 2025•Document ID: 11015322Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 2063410/7
- Date Added:
- March 7, 2025
- Manufacturer:
- BENTLEY
SummaryInfotainment Main unit (5F / J794) fault finding/diagnosis procedure. Condition: Issue suspected with the Infotainment Main unit (5F / J794) - For example: • MMI screen image flickers or goes blank • No response to selection • Audio cuts out
Associated Products (8)Associated Documents - February 22, 2025•Document ID: 11015401Service Bulletin/Repair InstructionsWHEELS; ELECTRICAL SYSTEM
- Mfr Comm. #:
- 2073377/2
- Date Added:
- March 8, 2025
- Manufacturer:
- BENTLEY
SummaryTPMS - Warning within the Drivers Information Panel (DIP) - Tyre pressure sensor - Low battery.
Associated Products (10)Associated Documents - February 22, 2025•Document ID: 11015391Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; ENGINE; FUEL/PROPULSION SYSTEM
- Mfr Comm. #:
- 2071674/3
- Date Added:
- March 8, 2025
- Manufacturer:
- BENTLEY
SummaryV8 Kovomo - DTC - P025C00: Fuel Pump Module Control Circuit Low logged in 0001. Condition: • Engine management light illuminated within the DIP • DTC P025C00 Fuel Pump Module Control Circuit Low is evident within 0001 (Engine control unit)
Associated Products (10)Associated Documents - February 22, 2025•Document ID: 11015385Service Bulletin/Repair InstructionsSUSPENSION; ELECTRICAL SYSTEM
- Mfr Comm. #:
- 2068946/9
- Date Added:
- March 8, 2025
- Manufacturer:
- BENTLEY
SummaryDTC P0B2500 logged within address 0021 (Battery Energy Control Module 2) - Dynamic ride system warning visible. Customer statement: Bentley dynamic ride system fault is displayed within the Drivers Instrument Panel (DIP)
Associated Products (10)Associated Documents - February 22, 2025•Document ID: 11015380Service Bulletin/Repair InstructionsFUEL/PROPULSION SYSTEM; ELECTRICAL SYSTEM; ENGINE
- Mfr Comm. #:
- 2065148/5
- Date Added:
- March 8, 2025
- Manufacturer:
- BENTLEY
SummaryV8 Kovomo - Engine MIL light on - DTC ' P04F000: EVAP system high pressure purge line performance' evident. Customer statement: • Engine MIL light illuminated within the DIP Workshop findings and observations: • DTC ‘P04F000: EVAP system high pressure purge line performance’ evident
Associated Products (9)Associated Documents - February 22, 2025•Document ID: 11015373Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; FORWARD COLLISION AVOIDANCE: ADAPTIVE CRUISE CONTROL; BACK OVER PREVENTION: REARVIEW SYSTEM BRAKING; FORWARD COLLISION AVOIDANCE: WARNINGS; FORWARD COLLISION AVOIDANCE: AUTOMATIC EMERGENCY BRAKING
- Mfr Comm. #:
- 2064648/5
- Date Added:
- March 8, 2025
- Manufacturer:
- BENTLEY
SummaryACC Unavailable-Traffic Assist Failure-Safeguard Failure-Radar Malfunction Warning DIP - Numerous DTC's within 0013. Customer statement: One or numerous of the following issues are evident: • ACC Failure • Traffic Assist Failure • Safeguard Failure • Radar Malfunction
Associated Products (10)Associated Documents - February 22, 2025•Document ID: 11015371Service Bulletin/Repair InstructionsWHEELS
- Mfr Comm. #:
- 2063651/4
- Date Added:
- March 8, 2025
- Manufacturer:
- BENTLEY
SummaryTyre tread/sidewall crack(s)
Associated Products (10)Associated Documents - February 22, 2025•Document ID: 11015370Service Bulletin/Repair InstructionsWHEELS
- Mfr Comm. #:
- 2063017/4
- Date Added:
- March 8, 2025
- Manufacturer:
- BENTLEY
SummaryRoad wheel inspection procedure. Condition: In the event a complaint is received regarding road wheel/s condition for example: • Scratches • Corrosion • Damage • Blemishes • Chipping
Associated Products (10)Associated Documents - February 22, 2025•Document ID: 11015368Service Bulletin/Repair InstructionsSTEERING; SUSPENSION; STRUCTURE:BODY
- Mfr Comm. #:
- 2056407/6
- Date Added:
- March 8, 2025
- Manufacturer:
- BENTLEY
SummaryRunning gear - Noise identification. Customer statement: Noise complaint from the suspension and/or steering.
Associated Products (10)Associated Documents - February 21, 2025•Document ID: 11015348Service Bulletin/Repair InstructionsSERVICE BRAKES
- Mfr Comm. #:
- 2052785/9
- Date Added:
- March 7, 2025
- Manufacturer:
- BENTLEY
SummaryBrake noise identification. Technical Background: Brake noises can be attributed to many causes, the most common causes are as follows: • Brake discs or pads are close to their wear limit • New brake pads and/or discs have not been properly bedded in after installation • Aftermarket pads or discs are installed • There is debris such as small stones, grit, road salt or sand between the brake disc and pad • Discs are covered in rust. Rust can form when the vehicle has been stationary for long periods of time
Associated Products (10)Associated Documents - December 19, 2024•Document ID: 11012455Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; EXTERIOR LIGHTING
- Mfr Comm. #:
- 2066480/8
- Date Added:
- January 7, 2025
- Manufacturer:
- BENTLEY
SummaryHeadlamp switch not working / not illuminated - Numerous DTC's within 0009-Central Electrics (BCM1). Customer statement: • Headlamp switch not working / not illuminated when the ignition is switched on (following an ignition switch off) And/or • Yellow warning light/message within DIP (Adaptive lighting fault) And / or • Loss of rear fog light activation And / or • Loss of all-weather lighting mode activation And / or • Headlamps will default to dipped beam (however, high beam activation will still be possible manually)
Associated Products (4)Associated Documents