Bentley Flying Spur Service Bulletins (2021)
714 manufacturer communications on file.
- June 17, 2021•Document ID: 10198709Service Bulletin/Repair InstructionsWHEELS
- Mfr Comm. #:
- 2063651/1
- Date Added:
- July 2, 2021
- Manufacturer:
- BENTLEY
SummaryTyre tread/sidewall crack(s). Customer statement / workshop findings: Cracks evident in the sidewall and/or tread pattern (See the examples in Figures 1 and 2 showing cracks within the tread pattern). The issue is mainly evident on vehicles with very low usage This is a result of the tyre compound hardening due to the following: - Tyre age - Tyre pressure not adjusted to specification - Low mileage/vehicle usage - Vehicle storage conditions
Associated Products (3)Associated Documents - June 17, 2021•Document ID: 10198706Service Bulletin/Repair InstructionsSTRUCTURE
- Mfr Comm. #:
- 2051526/6
- Date Added:
- July 2, 2021
- Manufacturer:
- BENTLEY
SummaryRotating screen alignment. Customer statement / workshop findings: The chrome brightware strip on the veneer face fascia panel of the Bentley Rotating Display (BRD) may appear to be misaligned with the chrome strips on the passenger and drivers side fascia panels. In addition, the gapping and fit between the veneer face fascia panel of the BRD and the passenger and drivers side fascia panels may differ from one side to the other. Technical background: The chrome brightware strip is fixed to the veneer face fascia panel with no separate adjustment and as such can appear to be misaligned. The veneer face fascia panel relies on fixed location pins that may be out of tolerance. Rework the veneer face fascia panel to align the chrome brightware strip and/or the gapping between the BRD and the passenger and drivers side fascia panels.
Associated Products (1)Associated Documents - June 14, 2021•Document ID: 10198703Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- 2058423/6
- Date Added:
- July 2, 2021
- Manufacturer:
- BENTLEY
SummaryNew Continental GT / GTC, New Flying Spur and Bentayga Speed - Low Oil Pressure Warning During Early Vehicle Life. Condition: Warning on the Driver Instrument Panel (DIP) - Oil pressure too low DTCs relating to oil pressure may also be stored within the Master ECU. Diagnostic Trouble Codes (DTC) P052400: Engine Oil Pressure Too Low and/or P15AA00: Engine oil pressure - Lower limit not reached stored in the Master Engine Control Unit (ECU). Service: VERY IMPORTANT: Prior to conducting the onward instructions, the following symptoms MUST be evident - Warning on Driver Instrument Panel (DIP) Oil pressure too low And/or - Diagnostic Trouble Codes (DTC) P052400: Engine Oil Pressure Too Low and/or P15AA00: Engine oil pressure - Lower limit not reached stored in the Master Engine Control Unit (ECU) Should any of the afore mentioned not be evident and the symptoms cannot be reproduced. No further action should be taken unless the issue can be reproduced or demonstrated by the customer In the event the symptom/s are evident please conduct the onward Diagnosis Instructions
Associated Products (2)Associated Documents - May 24, 2021•Document ID: 10195060Service Bulletin/Repair InstructionsSTEERING
- Mfr Comm. #:
- 2062095/2
- Date Added:
- June 5, 2021
- Manufacturer:
- BENTLEY
SummaryDTCs B14BF01 and /or B14A854 evident in address 0009 - Steering column will not adjust. Customer statement / workshop findings: Steering column will not adjust in any direction Workshop findings The following DTCs are evident within diagnostic address 0009 - B14BF01: Steering column vertical adjustment motor - Electrical - B14A854: Power adjustable steering column control module - No basic setting Technical background: Refer to the Measure section of this TPI
Associated Products (1)Associated Documents - May 24, 2021•Document ID: 10195025Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 2063410/1
- Date Added:
- June 4, 2021
- Manufacturer:
- BENTLEY
SummaryInfotainment Main unit (5F / J794) fault finding/diagnosis procedure. Customer statement / workshop findings: Issue suspected with the Infotainment Main unit (5F / J794) - For example: - MMI screen image flickers or goes blank - No response to selection - Audio cuts-out Technical background: Refer to the Measure section regarding any Infotainment Main unit (5F / J794) fault finding/diagnosis
Associated Products (2)Associated Documents - May 18, 2021•Document ID: 10195068Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- 2063354/1
- Date Added:
- June 5, 2021
- Manufacturer:
- BENTLEY
SummaryV8 Kovomo - Whining noise - Front of the engine at idle speed. Customer statement / workshop findings: Erratic whining noises from the front of the engine at idle speed. Workshop findings: The irregular knocking noises can be assigned to the front of the engine. There are no further complaints (such as poor engine or engine cooling system performance, event entries, etc.) Technical background: Refer to the video on the Bentley hub referencing TPI 2063354/- In the event the whining noise is as within the video, please refer to the Measure section of this TPI
Associated Products (2)Associated Documents - May 12, 2021•Document ID: 10195026Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 2053177/15
- Date Added:
- June 4, 2021
- Manufacturer:
- BENTLEY
SummaryAll Vehicle Variants - Spurious DTC List. Customer statement / workshop findings: Customer will not be aware of any fault codes. Workshop may discover spurious fault codes whilst running a Diagnostic Trouble Code (DTC) log as part of other investigations on the vehicle. Technical background: The attached document contains all of the current known Spurious DTCs for all vehicle variants. Should a particular TPI be listed as Archived within the attached document the TPI can no longer be viewed within Elsa pro, in this case please refer to the instructions with the attached document regarding the DTC description and actions (if any) which should be conducted.
Associated Products (2)Associated Documents - May 11, 2021•Document ID: 10195059Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 2055580/5
- Date Added:
- June 5, 2021
- Manufacturer:
- BENTLEY
SummaryRotating Display - Fault Diagnosis. Customer statement / workshop findings: Various rotating display operational complaints or noises. Technical background: Follow the measure section of this TPI that relates to your customer complaint
Associated Products (1)Associated Documents - April 29, 2021•Document ID: 10191844Service Bulletin/Repair InstructionsFUEL SYSTEM, GASOLINE
- Mfr Comm. #:
- 2061171/4
- Date Added:
- May 7, 2021
- Manufacturer:
- BENTLEY
SummaryNew Continental GT/GTC and New Flying Spur - V8 Kovomo - Fuel Pressure Regulation. Customer statement / workshop findings Check Engine Lamp illuminated within the Driver Instrument Panel (DIP) with one or multiple DTCs as detailed below: - P310B00 Low Fuel Pressure Regulation with symptom code 2636 - P014800 Fuel Deliver Error - P019100 Fuel Rail pressure Sensor A Circuit Range/Performance - Misfire DTCs There may be multiple DTCs and symptoms present due to fuel pressure regulation or fuel supply issues Technical background In the event the customer complaint relates to the following: - Customer experienced poor start up - proceed with the remaining instructions
Associated Products (1)Associated Documents - April 26, 2021•Document ID: 10191825Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 2062884/2
- Date Added:
- May 7, 2021
- Manufacturer:
- BENTLEY
SummaryNew Continental GT, GTC, New Flying Spur - Blind spot monitors not functional DTC C1114F3 logged in address 003C or 00CF Customer statement: Blind spot monitors (Wing mirror illuminations) are not functional in conjunction with sporadic Bentley assist warnings present in the DIP, Workshop Findings: Master or slave rear radars are not fitted correctly (unclipped or poorly installed) Diagnostic Trouble Code (DTC) C1114F3 - Lane change assistance control module restricted view, logged with address 003C or 00CF Technical background: As per the Workshop findings section The operative should review the Theory of operation chapter for the Rear radar
Associated Products (1)Associated Documents - April 16, 2021•Document ID: 10191678Service Bulletin/Repair InstructionsWHEELS
- Mfr Comm. #:
- 2063017/1
- Date Added:
- May 5, 2021
- Manufacturer:
- BENTLEY
SummaryRoad wheel inspection procedure: In the event a complaint is received regarding road wheel/s condition for example: - Scratches - Corrosion - Damage - Blemishes - Chipping Please refer to the onward instructions. Technical background: Do not consider submitting a warranty claim for a road wheel manufacturing defect without first referencing and understanding the contents of this document. Any defect or concern found either outside the guidelines stated in this document or not clearly stated as acceptable to support a warranty claim, will be the responsibility of the retailer regarding component replacement. Any road wheels deemed as having no issues found relating to a manufacturing defect (including curbing) will have the applicable claim rejected
Associated Products (3)Associated Documents - April 14, 2021•Document ID: 10191800Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; ENGINE AND ENGINE COOLING
- Mfr Comm. #:
- 2061369/2
- Date Added:
- May 6, 2021
- Manufacturer:
- BENTLEY
SummaryEngine overheating - Warning on the DIP - V8 Kovomo Customer statement / workshop findings: - Customer reports an engine overheat warning on the DIP - Engine overheats - Unusual cooling fan operation at high temperatures - There are no signs of coolant leaks both internally or externally Technical background: To heat the engine as quickly as possible during cold starting, delivery of coolant from the coolant pump is interrupted in the warm-up phase by the solenoid valve for the mechanical coolant pump
Associated Products (2)Associated Documents - April 9, 2021•Document ID: 10191680Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 2053177/14
- Date Added:
- May 5, 2021
- Manufacturer:
- BENTLEY
SummaryAll Vehicle Variants - Spurious DTC List. Customer statement / workshop findings: Customer will not be aware of any fault codes. Workshop may discover spurious fault codes whilst running a Diagnostic Trouble Code (DTC) log as part of other investigations on the vehicle. Technical background: The attached document contains all of the current known Spurious DTCs for all vehicle variants. Should a particular TPI be listed as Archived within the attached document the TPI can no longer be viewed within Elsa pro, in this case please refer to the instructions with the attached document regarding the DTC description and actions (if any) which should be conducted
Associated Products (2)Associated Documents - April 8, 2021•Document ID: 10191827Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 2062873/1
- Date Added:
- May 7, 2021
- Manufacturer:
- BENTLEY
SummaryNew Continental GT, GTC, New Flying Spur - Suspension Warning Lamp DTCs C134911 and/or C134B11 evident in address 74. Customer statement / workshop findings: Suspension warning lamp illuminated on Driver Instrument Panel (DIP) appeared when changing the Drive dynamics mode using the rotary switch on the front centre console: For example - When changing from Bentley to Sport mode Diagnostic Trouble Codes (DTCs) C134911 And / Or C134B11 Valve 1 for auxiliary volume 2 Short circuit to Ground (GND) evident within address 0074 Technical background: The issue is a result of the incorrect operation of the front air spring damper (right and/or left) between the internal chambers 1 and 2
Associated Products (1)Associated Documents - April 8, 2021•Document ID: 10191824Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 2062884/1
- Date Added:
- May 7, 2021
- Manufacturer:
- BENTLEY
SummaryNew Continental GT, GTC, New Flying Spur - Blind spot monitors not functional DTC C1114F3 logged in address 003C or 00CF. Customer statement : Blind spot monitors (Wing mirror illuminations) are not functional in conjunction with sporadic Bentley assist warnings present in the DIP Workshop findings: Master or slave rear radars are not fitted correctly (unclipped or poorly installed) Diagnostic Trouble Code (DTC) C1114F3 - Lane change assistance control module restricted view, logged with address 003C or 00CF Technical background: As per the Workshop findings section The operative should review the Theory of operation chapter for the Rear radar
Associated Products (1)Associated Documents - March 26, 2021•Document ID: 10190112Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; POWER TRAIN
- Mfr Comm. #:
- 2061288/3
- Date Added:
- April 8, 2021
- Manufacturer:
- BENTLEY
SummaryVarious and/or numerous Transmission control module DTCs logged - V8 Kovomo engine. Customer statement / workshop findings: Drive system fault active on DIP Workshop findings: Various and/or numerous Transmission control module DTCs logged Technical background: Loose pins within the transmission link harness to the Mechatronic unit for dual clutch gearbox -J743- connections can lead to various and/or numerous Transmission control module DTCs being logged
Associated Products (1)Associated Documents - March 24, 2021•Document ID: 10190089Service Bulletin/Repair InstructionsSTRUCTURE; EQUIPMENT
- Mfr Comm. #:
- 2062622/1
- Date Added:
- April 7, 2021
- Manufacturer:
- BENTLEY
SummaryWater leak/wind noise diagnosis. Customer statement / workshop findings: Water leak/wind noise evident Technical background: The instructions within the Measure section should be followed to assist in the diagnosis of water leaks or wind noise
Associated Products (2)Associated Documents - March 10, 2021•Document ID: 10190095Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING; ELECTRICAL SYSTEM; EQUIPMENT
- Mfr Comm. #:
- 2062626/1
- Date Added:
- April 8, 2021
- Manufacturer:
- BENTLEY
SummaryDTCs stored for all cylinders on Bank 1 or all cylinders on Bank 2 - W12 TSI engine derivative. Customer statement / workshop findings: - DTCs stored for all cylinders on Bank 1 or all cylinders on Bank 2 including multiple cylinder misfires DTC - Misfires logged in one or both engine control units - Engine warning light on - Erratic engine operation Technical background: Refer to the Measure section of this TPI
Associated Products (2)Associated Documents - March 4, 2021•Document ID: 10190017Service Bulletin/Repair InstructionsWHEELS; ELECTRICAL SYSTEM; TIRES:PRESSURE MONITORING AND REGULATING SYSTEMS
- Mfr Comm. #:
- 2061739/4
- Date Added:
- April 7, 2021
- Manufacturer:
- BENTLEY
SummaryTPMS - Warning within the Drivers Information Panel (DIP) - DTC C1239F0 - Tyre pressure display Positioning not possible. Customer statement / workshop findings: Yellow Tyre Pressure Monitoring System (TPMS) warning light is evident with the Drivers Information Panel (DIP) The warning is evident when the tyre size has been changed within the MMI For example: After changing the tyres from winter to summer variants or vice versa
Associated Products (3)Associated Documents - February 22, 2021•Document ID: 10188140Service Bulletin/Repair InstructionsTIRES:PRESSURE MONITORING AND REGULATING SYSTEMS; ELECTRICAL SYSTEM; WHEELS
- Mfr Comm. #:
- 2061739/3
- Date Added:
- March 4, 2021
- Manufacturer:
- BENTLEY
SummaryTPMS - Warning within the Drivers Information Panel (DIP) - DTC C1239F0 - Tyre pressure display Positioning not possible. Customer statement Yellow Tyre Pressure Monitoring System (TPMS) warning light is evident with the Drivers Information Panel (DIP) The warning is evident when the tyre size has been changed within the MMI For example: After changing the tyres from winter to summer variants or vice versa. Workshop findings: C1239F0 - Tyre pressure display Positioning not possible - Evident within address 0065 Technical background: If the tyre size type in the MMI is changed a yellow TPMS warning light within the DIP will be evident The ability to drive the vehicle will not be affected. The warning light will be displayed as follows: After a 4 minute drive cycle, The (TPMS) will enter into a partially active mode and outputs a warning within the (DIP) as shown in Figure 1
Associated Products (2)Associated Documents