Bentley Flying Spur Service Bulletins (2023)
487 manufacturer communications on file.
- October 12, 2023•Document ID: 10244971Service Bulletin/Repair InstructionsEQUIPMENT; ELECTRICAL SYSTEM
- Mfr Comm. #:
- 2061537/6
- Date Added:
- November 7, 2023
- Manufacturer:
- BENTLEY
SummaryInfotainment home screen - Loading messages visible on start up in multiple tiles. Customer statement / workshop findings: Upon start-up of the Home screen, loading messages can be seen in some or all of the tiles.
Associated Products (4)Associated Documents - October 12, 2023•Document ID: 10244970Service Bulletin/Repair InstructionsEQUIPMENT; ELECTRICAL SYSTEM
- Mfr Comm. #:
- 2061536/7
- Date Added:
- November 7, 2023
- Manufacturer:
- BENTLEY
SummaryInfotainment screen stalls at Initializing. Customer statement / workshop findings Upon start-up of the Infotainment system, the home screen appears to be stuck in the Initializing stage, when this scenario is evident a spinning wheel is visible.
Associated Products (4)Associated Documents - October 12, 2023•Document ID: 10244969Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING; ELECTRICAL SYSTEM
- Mfr Comm. #:
- 2061362/4
- Date Added:
- November 7, 2023
- Manufacturer:
- BENTLEY
SummaryEngine intermittently fails to start/Kombi pop up 'Engine start system: fault. Customer statement: Customer unable to intermittently start the engine with the start button Or Engine starts but customer gets a pop up error on the Kombi. Technical background: The Access/start authorization button requires a certain amount of force applying to activate the internal switches If all 3 switches within the Access/start authorization button are not engaged multiple times in a row the above DTC will store and the customer will get a pop up on the Kombi. The engine however, will still start up.
Associated Products (4)Associated Documents - October 12, 2023•Document ID: 10244968Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; POWER TRAIN
- Mfr Comm. #:
- 2061288/6
- Date Added:
- November 7, 2023
- Manufacturer:
- BENTLEY
SummaryVarious and/or numerous Transmission control module DTCs logged - V8 Kovomo engine. Customer statement / workshop findings: Drive system fault active on DIP. Workshop findings: Various and/or numerous Transmission control module DTCs logged. Technical background: Loose pins within the transmission link harness to the Mechatronic unit for dual clutch gearbox -J743- connections can lead to various and/or numerous Transmission control module DTCs being logged. Carry out the checks within the Measure section of this TPI.
Associated Products (4)Associated Documents - October 12, 2023•Document ID: 10244967Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; EQUIPMENT
- Mfr Comm. #:
- 2061195/3
- Date Added:
- November 7, 2023
- Manufacturer:
- BENTLEY
SummaryTelephone Functionality Complaint - Minimum Standards Required For Analysis Of Concerns. Customer statement / workshop findings: The feedback method within this TPI is required should a complaint of telephone functionality and/or quality be reported. Technical background: The minimum standards check list document within the Measure section is required to capture an accurate description of customer telephone issues.
Associated Products (9)Associated Documents - October 12, 2023•Document ID: 10244689Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; EQUIPMENT; STRUCTURE
- Mfr Comm. #:
- 2060645.5
- Date Added:
- November 6, 2023
- Manufacturer:
- BENTLEY
SummaryNew Flying Spur - Boot open/close function inoperative Customer Statement: -Boot operational issues for example: >The boot does not open or close as expected
Associated Products (4)Associated Documents - October 12, 2023•Document ID: 10244688Service Bulletin/Repair InstructionsEQUIPMENT; ELECTRICAL SYSTEM
- Mfr Comm. #:
- 2060605.6
- Date Added:
- November 6, 2023
- Manufacturer:
- BENTLEY
SummaryNew Flying Spur - Rear Entertainment - Component Protection Customer Statement: -Rear Entertainment display screen shows (Component Protection Active). Diagnostic Trouble Code (DTC) U110100 Component Protection Active stored within 004E (Display/Control head HR) and/or 005E (Display/Control Head LH).
Associated Products (4)Associated Documents - October 11, 2023•Document ID: 10244683Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; SEAT BELTS; EQUIPMENT ADAPTIVE/MOBILITY; ENGINE AND ENGINE COOLING
- Mfr Comm. #:
- 2059489.4
- Date Added:
- November 6, 2023
- Manufacturer:
- BENTLEY
SummaryStart/Stop system inhibit - Driver's seat belt unfastened Customer Statement: -The Start/Stop system functions with the drivers seat belt not fastened although the Owners handbook states that the drivers seat belt must be fastened for the Start/Stop system to function
Associated Products (4)Associated Documents - October 11, 2023•Document ID: 10244680Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; LATCHES/LOCKS/LINKAGES
- Mfr Comm. #:
- 2059333.5
- Date Added:
- November 6, 2023
- Manufacturer:
- BENTLEY
SummaryUnable to open, or delay in opening the Drivers or Front passenger door from outside using the door handle (Keyless) Technical Background: -In the event there is a customer complaint regarding the opening of the door from the outside of the vehicle when using the door handle (Keyless entry) please refer to the Measure section of this TPI
Associated Products (4)Associated Documents - October 11, 2023•Document ID: 10244678Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; ENGINE AND ENGINE COOLING; POWER TRAIN
- Mfr Comm. #:
- 2059068.6
- Date Added:
- November 6, 2023
- Manufacturer:
- BENTLEY
SummaryTransmission communication DTC's (Numerous) - W12 engine Customer Statement: -Drive system fault active on DIP (Figure 1)
Associated Products (4)Associated Documents - October 11, 2023•Document ID: 10244677Service Bulletin/Repair InstructionsSTEERING; ELECTRICAL SYSTEM
- Mfr Comm. #:
- 2058837.5
- Date Added:
- November 6, 2023
- Manufacturer:
- BENTLEY
SummaryDTC's C135DF0 and/or C12F000 evident within the Steering rack and power steering control unit (J500) Customer Statement: -DTC's C135DF0 and/or C12F000 evident within the Steering rack and power steering control unit (J500) Diagnostic address 44
Associated Products (4)Associated Documents - October 11, 2023•Document ID: 10244676Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING; ELECTRICAL SYSTEM
- Mfr Comm. #:
- 2058423.10
- Date Added:
- November 6, 2023
- Manufacturer:
- BENTLEY
SummaryNew Continental GT/GTC, New Flying Spur and Bentayga - Low Oil Pressure Warning During Early Vehicle Life - W12 only Customer Statement: -Warning on the Driver Instrument Panel (DIP) - Oil pressure too low DTCs relating to oil pressure may also be stored within the Master ECU. Diagnostic Trouble Codes (DTC) (P052400: Engine Oil Pressure Too Low) and/or (P15AA00: Engine oil pressure - Lower limit not reached stored in the Master Engine Control Unit (ECU)
Associated Products (6)Associated Documents - October 11, 2023•Document ID: 10244675Service Bulletin/Repair InstructionsEQUIPMENT; STRUCTURE
- Mfr Comm. #:
- 2058354.6
- Date Added:
- November 6, 2023
- Manufacturer:
- BENTLEY
SummaryNew Flying Spur - Flying (B) Mascot Customer Statement: -This Technical Product Information (TPI) Document is designed to give repair guidance and standardised fault reporting for Flying (B) functionality, poor finish and damage concerns.
Associated Products (4)Associated Documents - October 11, 2023•Document ID: 10244651Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- 2057978.7
- Date Added:
- November 6, 2023
- Manufacturer:
- BENTLEY
SummaryEngine Lubricating Oil - Replenishment Customer Statement: -Engine lubricating oil lamp illuminated on driver instrument panel. Engine lubricating oil requires topping up between services.
Associated Products (9)Associated Documents - October 11, 2023•Document ID: 10244649Service Bulletin/Repair InstructionsPOWER TRAIN; STEERING
- Mfr Comm. #:
- 2056407.5
- Date Added:
- November 6, 2023
- Manufacturer:
- BENTLEY
SummaryRunning gear - Noise identification Workshop Findings: -The noise can be reproduced and clearly assigned to the suspension system from either of the axles And/or The noise can be reproduced and clearly assigned to the steering system Prior to starting the instructions within this TPI, the Retailer must check and confirm the vehicle is in standard factory condition and has not had any non-approved aftermarket modifications conducted including the modification of the engine control modules (chip tuning) Check the history of the vehicle to confirm Should any aftermarket modifications be found, the Retailer must make Product Support aware by raising a DISS query to report the details of the modification, you must then await feedback from Product Support before conducting any further work
Associated Products (9)Associated Documents - October 11, 2023•Document ID: 10244648Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 2055846.8
- Date Added:
- November 6, 2023
- Manufacturer:
- BENTLEY
SummaryInfotainment screen turns red sporadically Customer Statement: -Infotainment screen 'Goes Red Fully or partially' within the MMI Screen (Figure 1)
Associated Products (4)Associated Documents - October 11, 2023•Document ID: 10244647Service Bulletin/Repair InstructionsEQUIPMENT; ELECTRICAL SYSTEM
- Mfr Comm. #:
- 2055772.6
- Date Added:
- November 6, 2023
- Manufacturer:
- BENTLEY
SummaryBattery conditioner inoperative Technical Background: -Corrosion on the contact surfaces of the charger socket and charger lead. If the charging socket or charger lead are wet when the charger is connected this can cause corrosion on the contacts.
Associated Products (4)Associated Documents - October 11, 2023•Document ID: 10244641Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING; ELECTRICAL SYSTEM
- Mfr Comm. #:
- 2053429.6
- Date Added:
- November 6, 2023
- Manufacturer:
- BENTLEY
SummaryEmission control system lamp illuminated - DTC P044100 evident Customer Statement: -Emission control system warning lamp illuminated (Figure 1) within the Driver Information Panel (DIP) in conjunction with DTC - P044100: EVAP Emission Contr.Sys.Incorrect Purge Flow - logged within one or both engine control modules
Associated Products (8)Associated Documents - October 11, 2023•Document ID: 10244637Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- 2053351.9
- Date Added:
- November 6, 2023
- Manufacturer:
- BENTLEY
SummaryBuzzing noise from engine area Workshop Findings: -Buzzing noise heard at idle from the sump area when the vehicle is elevated on a workshop ramp. The noise cannot be heard from inside the cabin or outside of the vehicle in normal circumstances.
Associated Products (8)Associated Documents - October 11, 2023•Document ID: 10244634Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- 2053350.5
- Date Added:
- November 6, 2023
- Manufacturer:
- BENTLEY
SummaryW12 - Oil leak from engine Technical Background: -The breather return line and the oil dipstick tube Orings can split causing an external oil leak. This can be misdiagnosed as the engine sump leaking.
Associated Products (4)Associated Documents