Audi S6 Service Bulletins (2007)
264 manufacturer communications on file.
- February 5, 2013•Document ID: 10124000Service Bulletin/Repair InstructionsBACK OVER PREVENTION: CAMERA SYSTEM
- Mfr Comm. #:
- A911374 2024323-
- Date Added:
- November 17, 2017
- Manufacturer:
- AUDI
SummarySupersedes Technical Service Bulletin Group 91 number 12-61 dated October 1, 2012. Parking aid sporadically warns of obstacles when none exist. Parking aid is inoperative or provides constant warning. Various parking aid sensor fitting issues. Environmental conditions.
Associated Products (112)Associated Documents - January 9, 2013•Document ID: 10216682Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- 1335201004313
- Date Added:
- August 1, 2022
- Manufacturer:
- AUDI
SummaryEngine oils that meet Audi Oil Quality Standards.
Associated Products (245)Associated Documents - January 1, 2013•Document ID: 10253418Service Bulletin/Repair InstructionsEQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
- Mfr Comm. #:
- A6-S6-A
- Date Added:
- April 22, 2024
- Manufacturer:
- AUDI
SummaryAudi Delivery Guidelines.
Associated Products (50)Associated Documents - January 1, 2013•Document ID: 10253417Service Bulletin/Repair InstructionsEQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
- Mfr Comm. #:
- A6-S6
- Date Added:
- April 22, 2024
- Manufacturer:
- AUDI
SummaryAudi Delivery Guidelines.
Associated Products (50)Associated Documents - October 29, 2012•Document ID: 10063095Service Bulletin/Repair InstructionsENGINE
- Mfr Comm. #:
- SB-01-12-57
- Date Added:
- April 26, 2016
- Manufacturer:
- AUDI
SummarySUMMARY TO BE PROVIDED ON A FUTURE DATE.
Associated Products (31)Associated Documents - October 29, 2012•Document ID: 10250415Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- 0112572028344
- Date Added:
- February 20, 2024
- Manufacturer:
- AUDI
SummaryIdle speed characteristic during cold start
Associated Products (45)Associated Documents - October 29, 2012•Document ID: 10122803Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL:CATALYTIC CONVERTOR; ENGINE AND ENGINE COOLING
- Mfr Comm. #:
- A011257 2028344-
- Date Added:
- November 8, 2017
- Manufacturer:
- AUDI
SummarySupersedes Technical Service Bulletin Group 01 number 12-51 dated July 18, 2012. Noises/inconsistent engine operation after cold start during the catalyst heating phase. The customer may interpret this engine roughness as misfiring. To comply with the legal requirements on exhaust gas emissions according to the LEV-1 and LEV-2 standards, a high exhaust gas quality must be ensured. The necessary catalyst only operates at a temperature over 300°C (572°F). To achieve this, the catalyst is heated up. The catalyst heating phase is achieved by a late ignition angles and by introducing additional fresh air to the exhaust valves (secondary air system). Late ignition angles make sure that the exhaust gas from the cylinders has a higher temperature. This exhaust gas includes fuel that is un-burnt, and was deliberately injected into great quantities. The secondary air system adds fresh air to the exhaust gas as it leaves the cylinder and the extra fuel is burnt. As a result, the temperature of the exhaust gas and of the catalyst increases quickly. The afterburning in the exhaust manifold before catalyst changes the sound characteristic of the engine. This heating-up of the catalyst, including afterburning, is normal and has no effect on the service life of the engine. During this catalyst heating phase the engine has increased idle speed, may have increased vibrations, and a different sound characteristic. Depending on conditions the time of the catalyst heating phase varies.
Associated Products (43)Associated Documents - October 24, 2012•Document ID: 10122766Service Bulletin/Repair InstructionsEXTERIOR LIGHTING
- Mfr Comm. #:
- A941292 2012749-
- Date Added:
- November 8, 2017
- Manufacturer:
- AUDI
SummarySupersedes Technical Service Bulletin Group 94 number 11-52 dated October 11, 2011. Condensation is visible on the inside of the headlight, taillight, fog light, side marker light, front turn signal, daytime running lights, or third brake light lens. Damp air settles on the inside of a cold lens, which creates condensation. The headlight circulation system allows air from the outside to flow through the headlights. This open waterprotected ventilation system (needed for pressure compensation) creates different climate zones in the headlight: very warm areas, where the lens is warmed up by the light, and relatively cool areas, where the lens is cooled own by the air flow. Considerable differences in humidity and temperature between the inside and the outside of the headlights, even while driving, can lead to condensation. This is especially true in cold and wet weather, but it can also happen after a car wash, after steam cleaning the engine or the front end, with overnight temperature changes, etc. This phenomenon is more visible on lenses made of clear glass than on lenses with patterns. The moisture does not affect the headlight function (light performance) and does not lead to corrosion or other damage to headlight parts.
Associated Products (149)Associated Documents - October 22, 2012•Document ID: 10250413Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING; POWER TRAIN
- Mfr Comm. #:
- 0112552030192
- Date Added:
- February 20, 2024
- Manufacturer:
- AUDI
SummaryEngine may have reduced performance without significant loss of power or stalling
Associated Products (18)Associated Documents - October 22, 2012•Document ID: 10122805Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; ENGINE AND ENGINE COOLING
- Mfr Comm. #:
- A011255 2030192-
- Date Added:
- November 8, 2017
- Manufacturer:
- AUDI
SummaryMIL light on. P2015 sender of intake manifold flap position/air flow control, implausible signal P2020 sender of intake manifold flap position, intake manifold flap 2, implausible signal. Engine may have reduced performance without significant loss of power or stalling. Check service history to see if the improved ? B? suffix V157 Intake Flap motor has already been installed previously; if yes, only replace the potentiometer seals as described below. The fault entry is made because a linkage of the intake manifold flap adjustment sticks. This is caused by deformed oil seal behind the potentiometers.
Associated Products (18)Associated Documents - October 4, 2012•Document ID: 10122771Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; EQUIPMENT:APPLIANCE:AIR CONDITIONER
- Mfr Comm. #:
- A911263 2021151-
- Date Added:
- November 8, 2017
- Manufacturer:
- AUDI
SummarySupersedes Technical Service Bulletin Group 91 number 11 ? 83 dated April 15, 2011. The customer may report that the illumination of the dash insert, the air conditioning control panel or the inside light flickers when briefly pressing the accelerator in P or N or when shifting down while driving downhill. Only vehicles with PR number 8GH may be affected. When high electricity consumers are switched off and the battery is fully charged, the energy generated by the alternator is sometimes too great for the power system to absorb. This may lead to briefly increased voltage, and the lights mentioned above may briefly flicker. This characteristic is caused by the alternator design and is a normal condition of the vehicle.
Associated Products (89)Associated Documents - September 1, 2011•Document ID: 10040959Service Bulletin/Repair InstructionsFUEL SYSTEM, OTHER:DELIVERY:FUEL PUMP
- Mfr Comm. #:
- SB090111
- Date Added:
- September 14, 2011
- Manufacturer:
- AUDI
SummaryVOLKSWAGEN SERVICE CAMPAIGN: SEE DOCUMENT SEARCH BUTTON FOR OWNER LETTER. PRODUCTION ISSUES MAY CAUSE PREMATURE WEAR ON THE INTAKE CAMSHAFT AND CAMSHAFT FOLLOWER. MALFUNCTION LIGHT WILL ILLUMINATE. *RM
Associated Products (27)Associated Documents - December 3, 2010•Document ID: 10037825Service Bulletin/Repair InstructionsEQUIPMENT:ELECTRICAL; EQUIPMENT ADAPTIVE/MOBILITY
- Mfr Comm. #:
- AWA-10-11
- Date Added:
- June 6, 2011
- Manufacturer:
- AUDI
SummaryVOLKSWAGEN: WARRANTY EXTENSION FOR THE HEADLIGHT BULBS. *RM
Associated Products (30)Associated Documents - August 1, 2010•Document ID: 10036497Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING:ENGINE:GASOLINE
- Mfr Comm. #:
- SAC-28F2-REV
- Date Added:
- March 23, 2011
- Manufacturer:
- AUDI
SummaryAUDI: GASOLINE ENGINE VEHICLES; INSPECT, AND IF NECESSARY, REPLACE IGNITION COILS. VEHICLES AFFECTED BY THIS ACTION MAY HAVE IGNITION COILS THAT COULD MALFUNCTION UNDER CERTAIN CONDITIONS. ADDED FINAL MAILING PHASE-8/10 VIN INFORMATION. MODELS A4/CABRIOLET; TT; A3; A8; A6; S4; ALLROAD; RS4; Q7; S6; S8. *PE
Associated Products (54)Associated Documents - May 1, 2010•Document ID: 10033212Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:IGNITION; ENGINE AND ENGINE COOLING:ENGINE:GASOLINE
- Mfr Comm. #:
- SA-28F2 J1
- Date Added:
- July 26, 2010
- Manufacturer:
- AUDI
SummaryAUDI: (REVISED) VEHICLES AFFECTED BY THIS ACTION MAY HAVE IGNITION COILS THAT COULD MALFUNCTION UNDER CERTAIN CONDITIONS. IF THIS HAPPENS, THE MALFUNCTION INDICATOR LAMP (MIL) WILL ILLUMINATE TO LET YOU KNOW THAT THE VEHICLE MAY EXPERIENCE SOME DETERIORATION IN PERFORMANCE. IN SOME CASES, A MALFUNCTIONING IGNITION COIL MAY CAUSE A VEHICLE TO EXCEED FEDERAL AND/OR CALIFORNIA EMISSIONS STANDARDS. *PE UPDATED 8/9/10. *PE UPDATED 8/11/10. *PE UPDATED 11/8/10. *PE UPDATED 11/10/10. *PE UPDATED 1/10/11. *PE
Associated Products (63)Associated Documents - March 24, 2010•Document ID: 10035268Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:SOFTWARE
- Mfr Comm. #:
- TSB-00-10-02
- Date Added:
- February 14, 2011
- Manufacturer:
- AUDI
SummaryAUDI: SOFTWARE VERSION MANAGEMENT (SVM) OPERATING INSTRUCTIONS. DETAILING THE GENERAL PROCESS FOR CARRYING OUT A SOFTWARE VERSION MANAGEMENT (SVM) SOFTWARE UPDATE FOR ANY TSB OR REQUIRED VEHICLE UPDATE (RVU). TROUBLESHOOTING INFORMATION IS INCLUDED. *PE
Associated Products (96)Associated Documents - January 29, 2010•Document ID: 10034344Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING:ENGINE; FUEL SYSTEM, OTHER
- Mfr Comm. #:
- TSB-24-10-02
- Date Added:
- November 5, 2010
- Manufacturer:
- AUDI
SummaryAUDI: MIL ON AND ONE OR MORE OF THE FOLLOWING DTCS ARE STORED IN THE ECM DATA MEMORY-P310B (LOW PRESSURE FUEL SYSTEM REGULATION, FUEL PRESSURE OUTSIDE TOLERANCE); P129F OR P008B (LOW PRESSURE FUEL SYSTEM, PRESSURE TOO HIGH); P129E OR P008A (LOW PRESSURE SYSTEM, PRESSURE TOO LOW); P2540 (LOW PRESSURE FUEL SYSTEM, PRESSURE OUT OF RANGE); P0087 (RAIL FUEL PRESSURE SYSTEM, PRESSURE TOO LOW). MODELS A3,4,6,8, S6,8, RS4, Q7, AND TT (2005-2008). *PE
Associated Products (29)Associated Documents - January 12, 2010•Document ID: 10033025Service Bulletin/Repair InstructionsFUEL SYSTEM, OTHER:STORAGE:TANK ASSEMBLY:PRESSURE RELIEF DEVICES
- Mfr Comm. #:
- TSB-24-10-01
- Date Added:
- June 25, 2010
- Manufacturer:
- AUDI
SummaryAUDI: DUE TO FUEL INTRUSION INTO THE LOW PRESSURE SYSTEM FUEL PRESSURE SENSOR (G410), A FALSE SIGNAL MAY BE SENT TO THE CONTROLLER, RESULTING IN A READING THAT IS OUT OF TOLERANCE. COMPARING MEASURE VALUE BLOCK 103 WITH 106 IS NOT AN ACCURATE METHOD TO DIAGNOSE LOW SIDE FUEL PRESSURE SENSOR G410. *PE
Associated Products (29)Associated Documents - June 30, 2009•Document ID: 10030593Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:WIRING; FUEL SYSTEM, OTHER:DELIVERY:FUEL PUMP; FUEL SYSTEM, GASOLINE:DELIVERY:FUEL PUMP
- Mfr Comm. #:
- KM-1379
- Date Added:
- October 23, 2009
- Manufacturer:
- AUDI
SummaryAUDI: MIL LIGHT ON AND DTC P2294 (FUEL PRESSURE REGULATOR 2 CONTROL CIRCUIT), P2295 (FUEL PRESSURE REGULATOR 2 CONTROL CIRCUIT LOW), P2296 (FUEL PRESSURE REGULATOR 2 CONTROL CIRCUIT HIGH) IN FAULT MEMORY DRIVABILITY IS NOT AFFECTED. WIRING HARNESS TO HIGH PRESSURE PUMP MIGHT BE STRESSED AND TIGHTLY BENT AT THE PUMP CONNECTOR. THE HARNESS ALSO MIGHT BE BENT AROUND SHARP EDGES OF CYLINDER HEAD. NO MODELS LISTED. *PE
Associated Products (36)Associated Documents - May 13, 2009•Document ID: 10032290Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:SOFTWARE
- Mfr Comm. #:
- TSB-01-09-06
- Date Added:
- March 1, 2010
- Manufacturer:
- AUDI
SummaryAUDI: SOFTWARE VERSION MANAGEMENT (SVM), OPERATING INSTRUCTIONS. SVM IS A PROCESS TO UPDATE THE PROGRAMMING IN FLASHABLE (RE-PROGRAMMABLE) CONTROL MODULES AND/OR TO DOCUMENT CHANGES IN SOFTWARE LEVELS IN AUDI VEHICLES. THIS SYSTEM USES THE VAS 5051B OR VAS 5052 DIAGNOSTIC TOOLS TO SEND VEHICLE SPECIFIC DATA TO THE SVM DATABASE, TO DOWNLOAD INSTRUCTIONS FROM THE SVM DATABASE, AND TO FLASH CONTROL UNITS FOR IDENTIFIED SOFTWARE UPDATES. *PE
Associated Products (91)Associated Documents