Audi S4 Service Bulletins (2014)
725 manufacturer communications on file.
- September 24, 2015•Document ID: 10123771Service Bulletin/Repair InstructionsEQUIPMENT:APPLIANCE:AIR CONDITIONER
- Mfr Comm. #:
- A871570 2041717-
- Date Added:
- November 17, 2017
- Manufacturer:
- AUDI
SummarySupersedes Technical Service Bulletin Group 87 number 15-67 dated August 19, 2015. This bulletin applies to any repair that requires replacement of the air conditioning compressor. Any replacement of A/C compressors?regardless of the reason for failure?must include an ODIS GFF cooling performance test plan of the A/C system with documentation of the recovered refrigerant volume. This GFF test plan requirement is mandatory without exception.
Associated Products (100)Associated Documents - September 21, 2015•Document ID: 10123792Service Bulletin/Repair InstructionsEQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
- Mfr Comm. #:
- Email Mandatory
- Date Added:
- November 17, 2017
- Manufacturer:
- AUDI
SummaryThis document contains the important email to all Audi dealership personnel in regards to the immediate madatory stop-sale order that is in effect to all vehicles from 20110-2015 that have a 2.0L TDI engine.
Associated Products (121)Associated Documents - September 21, 2015•Document ID: 10123775Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:SOFTWARE
- Mfr Comm. #:
- A961501 2019260-
- Date Added:
- November 17, 2017
- Manufacturer:
- AUDI
SummarySupersedes Technical Service Bulletin Group 96 number 13-67 dated July 10, 2013. The customer may report that the handheld transmitter cannot be programmed to the garage door opener control module, J530. The customer?s door opener system may not be compatible with J530. The battery in the handheld transmitter may be too weak for a good signal. The battery charge may be sufficient to operate the garage door opener, but not enough to program the remote transmitter to the vehicle system. The battery in the handheld transmitter may be too weak for a good signal. The battery charge may be sufficient to operate the garage door opener, but not enough to program the remote transmitter to the vehicle system. In A4 model years 2005?2006 and A3 model year 2009, the actual location of the garage door opener control module differs from the location shown in the owner's manual (opposite side of front bumper). The customer may misunderstand the programming procedure, particularly if the customer?s HomeLink® opener system is using an alternate code. The handheld transmitter?s programming function may become inoperative, or the transmitter is too far away from J530. Interference prevents the communication between handheld transmitter and J530. Interference prevents the communication between handheld transmitter and J530. If the vehicle flashes during the programming of a handheld transmitter, this does not necessarily indicate that the programming was successful; it only indicates that the vehicle has recognized and saved a signal.
Associated Products (188)Associated Documents - September 18, 2015•Document ID: 10123765Service Bulletin/Repair InstructionsSTRUCTURE:BODY
- Mfr Comm. #:
- A351518 2028085-
- Date Added:
- November 17, 2017
- Manufacturer:
- AUDI
SummarySupersedes Technical Service Bulletin Group 35 number 13-12 dated June 18, 2013. Customer may report that there is oil leaking under the vehicle. Leaking from the oil pan seal. Crack in the oil pan. Leak between gearbox housing and intermediate housing. The source of the leak may be confused with o-ring of drain plug.
Associated Products (31)Associated Documents - September 9, 2015•Document ID: 10123763Service Bulletin/Repair InstructionsENGINE
- Mfr Comm. #:
- A171565 2038129-
- Date Added:
- November 17, 2017
- Manufacturer:
- AUDI
SummarySupersedes Technical Service Bulletin Group 17 number 15-63 dated June 2, 2015. A check with the engine oil service dipstick T40178 is necessary, but the adjustment values for the dipstick are not available in the Elsa repair manual. Because of a system change, the adjustment values for the service dipstick T40178 were removed from the repair manual.
Associated Products (126)Associated Documents - September 8, 2015•Document ID: 10123764Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- A191562 2025303-
- Date Added:
- November 17, 2017
- Manufacturer:
- AUDI
SummarySupersedes Technical Service Bulletin Group 19 number 15-61 dated July 7, 2015. Discontinuation and mixing of Audi-approved engine coolants. G11, G12, and G12+ coolants have been replaced by an improved version. G12++ coolant (for service available) has been introduced in MY 2005 for all engines. G13 has been introduced in MY 2008 as factory filling and service.
Associated Products (224)Associated Documents - August 19, 2015•Document ID: 10128408Service Bulletin/Repair InstructionsEQUIPMENT:APPLIANCE:AIR CONDITIONER
- Mfr Comm. #:
- A871567 2041717-
- Date Added:
- February 5, 2018
- Manufacturer:
- AUDI
SummaryCustomer may report poor performance of A/C system or that the A/C system is inoperative. Any replacement of A/C compressors must include an ODIS GFF test plan confirming a malfunction of the A/C system with documentation of the recovered refrigerant volume.
Associated Products (124)Associated Documents - July 29, 2015•Document ID: 10128397Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- A0115362041120-2
- Date Added:
- February 5, 2018
- Manufacturer:
- AUDI
SummarySupersedes Technical Service Bulletin Group 01 number 15-26 dated June 30, 2015. The MIL is on. DTC P042000 and/or P043000 (Catalyst system Bank 1/2, Efficiency below threshold) is stored in the engine control module (ECM). The diagnostic limitations were too narrow.
Associated Products (22)Associated Documents - July 7, 2015•Document ID: 10128399Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- A1915612025303-5
- Date Added:
- February 5, 2018
- Manufacturer:
- AUDI
SummarySupersedes Technical Service Bulletin Group 19 number 14-50 dated June 20, 2014. Discontinuation and mixing of Audi-approved engine coolants. G11, G12, and G12+ coolants have been replaced by an improved version. G12++ coolant (for service available) has been introduced in MY 2005 for all engines. G13 has been introduced in MY 2008 as factory filling and service.
Associated Products (240)Associated Documents - July 1, 2015•Document ID: 10128471Service Bulletin/Repair InstructionsPOWER TRAIN; EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL; EQUIPMENT
- Mfr Comm. #:
- A301519 2019850-
- Date Added:
- February 5, 2018
- Manufacturer:
- AUDI
SummarySupersedes Technical Service Bulletin Group 30 number 11-10 dated December 2, 2011. Clutch is not operating properly. Clutch has a burnt smell. Clutch pedal does not fully return to starting position. Incorrect shifting, the revolutions of clutch plate and engine input shaft differ too much, excessive slipping of the clutch, and when the clutch is pressed and an incorrect lower gear is selected, can result in clutch damage.
Associated Products (115)Associated Documents - July 1, 2015•Document ID: 10128469Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; ENGINE
- Mfr Comm. #:
- A0115292041097-1
- Date Added:
- February 5, 2018
- Manufacturer:
- AUDI
SummaryThe MIL is on. Customer may report that the engine runs irregularly. DTCs are stored in the ECM. On the camshaft adjustment valve, the filter element can loosen. There is no consequential damage from loosened particles in the oil circuit. They are gathered by the oil filter.
Associated Products (32)Associated Documents - July 1, 2015•Document ID: 10058584Service Bulletin/Repair InstructionsENGINE
- Mfr Comm. #:
- SB-01-15-29
- Date Added:
- October 15, 2015
- Manufacturer:
- AUDI
SummaryAUDI: ENGINE, ON SOME VEHICLES, WOULD RUN IRREGULARLY OR HAVE MALFUNCTION INDICATOR LAMP (MIL) ON OR POSSIBLE FILTER ELEMENT FOR CAMSHAFT ADJUSTMENT VALVE CAN LOOSEN AND IN OIL CIRCUIT, THERE IS NO DAMAGE FROM LOOSENED PARTICLES. MODEL ALL. ALL YEARS. *PE
Associated Products (225)Associated Documents - June 30, 2015•Document ID: 10120746Service Bulletin/Repair InstructionsPOWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM)
- Mfr Comm. #:
- A011526 2041120-
- Date Added:
- October 25, 2017
- Manufacturer:
- AUDI
SummaryThe MIL is on. DTC P042000 and/or P043000 (Catalyst system Bank 1/2, Efficiency below threshold) is stored in the engine control module (ECM), J623 (address word 01). The diagnostic limitations were too narrow.
Associated Products (22)Associated Documents - June 29, 2015•Document ID: 10120832Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- A911598 2018187-
- Date Added:
- October 27, 2017
- Manufacturer:
- AUDI
SummarySupersedes Technical Service Bulletin Group 91 number 14-50 dated July 10, 2014. Customer may report that cracking, grinding, rattling, humming, whining, or similar interference is coming from one or more speakers. Parts of the speakers (such as the brackets, cables, or covers) or parts of the interior fittings (such as door covers, rear shelf, facings, or covers) can vibrate at certain frequencies, causing noises. The radio tuner or other control modules may be affected by electromagnetic interference from aftermarket electronic devices.
Associated Products (181)Associated Documents - June 24, 2015•Document ID: 10120821Service Bulletin/Repair InstructionsEQUIPMENT ADAPTIVE/MOBILITY
- Mfr Comm. #:
- A871564 2010146-
- Date Added:
- October 27, 2017
- Manufacturer:
- AUDI
SummarySupersedes Technical Service Bulletin Group 87 number 15-63 dated May 18, 2015. There is an unpleasant, musty odor coming from the heating and ventilation system. The odor usually occurs when the vehicle has been sitting unused for five hours or more. The odor usually occurs within 20 to 60 seconds after the vehicle is started. Condensation, which is a normal condition in all A/C systems, can cause a musty odor.
Associated Products (168)Associated Documents - June 19, 2015•Document ID: 10120829Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:SOFTWARE
- Mfr Comm. #:
- A911595 2040926-
- Date Added:
- October 27, 2017
- Manufacturer:
- AUDI
SummaryThe navigation map update database 8R0051884CJ cannot be activated using Software Version Management.
Associated Products (103)Associated Documents - June 15, 2015•Document ID: 10120913Service Bulletin/Repair InstructionsSTEERING:HYDRAULIC POWER ASSIST:POWER STEERING FLUID; EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL; ENGINE; POWER TRAIN; SERVICE BRAKES, HYDRAULIC:FLUID
- Mfr Comm. #:
- Executive Servic
- Date Added:
- October 27, 2017
- Manufacturer:
- AUDI
SummaryThis document contains a fluid capacity chart as well as a chart that contains the parts and part numbers needed for service.
Associated Products (3)Associated Documents - June 9, 2015•Document ID: 10120743Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- A011524 2040491-
- Date Added:
- October 25, 2017
- Manufacturer:
- AUDI
SummaryThe MIL is on. "Coolant System: Fault Turn Off Engine" and the coolant symbol appears in the information panel. DTC P1B1C00 is stored in the ECM.
Associated Products (63)Associated Documents - June 2, 2015•Document ID: 10120805Service Bulletin/Repair InstructionsENGINE
- Mfr Comm. #:
- A171563 2038129-
- Date Added:
- October 27, 2017
- Manufacturer:
- AUDI
SummarySupersedes Technical Service Bulletin Group 17 number 14-53 dated November 7, 2014. A check with the engine oil service dipstick T40178 is necessary, but the adjustment values for the dipstick are not available in the Elsa repair manual. Because of a system change, the adjustment values for the service dipstick T40178 were removed from the repair manual.
Associated Products (126)Associated Documents - May 29, 2015•Document ID: 10120052Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- A971548 2013504-
- Date Added:
- October 21, 2017
- Manufacturer:
- AUDI
SummarySupersedes Technical Service Bulletin Group 97 number 10-15 dated October 20, 2010. Sporadic fault memory entries are stored in various control modules. Contacts may be widened (over 0.63 mm) if incorrect pins or incorrect methods for current flow tests are used. Either action may cause intermittent electrical connections, which can cause sporadic DTCs to be stored in various control modules.
Associated Products (202)Associated Documents