Audi Q7 Service Bulletins (2009)
700 manufacturer communications on file.
- January 9, 2014•Document ID: 10122192Service Bulletin/Repair InstructionsWHEELS; SERVICE BRAKES, HYDRAULIC; STEERING
- Mfr Comm. #:
- A461466 2022584-
- Date Added:
- November 8, 2017
- Manufacturer:
- AUDI
SummarySupersedes Technical Service Bulletin Group 46 number 12-23 dated June 18, 2012. Customer may report that the steering wheel vibrates or pulsates when the brakes are applied. Document contains the brake pulsation diagnostic guidelines.
Associated Products (105)Associated Documents - January 8, 2014•Document ID: 10228385Service Bulletin/Repair InstructionsFUEL SYSTEM, DIESEL
- Mfr Comm. #:
- 01145520361691
- Date Added:
- January 3, 2023
- Manufacturer:
- AUDI
SummaryIn tank, fuel pump may be making a straining noise. Diesel fuel requires additive blending or ?winterization? to be useable at low temperatures. At temperatures below 20° F (-7° C), No. 2 Diesel with insufficient winterization blending may lose its fluidity due to wax separation. This may clog the fuel filter or in-tank filter, preventing the engine from operating properly. No. 2 Diesel is blended by refineries to various levels of winterization (minimum useable temperature) based on month, geographical location, and the 10th percentile minimum ambient air temperature for the given region. Although rare, during sudden periods of extreme low temperatures (record lows), fuel stations may not be adequately prepared with No. 2 Diesel fuel with sufficient winterization to resist wax formation or ?gelling?.
Associated Products (35)Associated Documents - January 8, 2014•Document ID: 10225064Service Bulletin/Repair InstructionsFUEL SYSTEM, GASOLINE; FUEL SYSTEM, DIESEL
- Mfr Comm. #:
- 01145520361691
- Date Added:
- October 31, 2022
- Manufacturer:
- AUDI
SummaryIn tank, fuel pump may be making a straining noise. Diesel fuel requires additive blending or ?winterization? to be useable at low temperatures. At temperatures below 20° F (-7° C), No. 2 Diesel with insufficient winterization blending may lose its fluidity due to wax separation. This may clog the fuel filter or in-tank filter, preventing the engine from operating properly. No. 2 Diesel is blended by refineries to various levels of winterization (minimum useable temperature) based on month, geographical location, and the 10th percentile minimum ambient air temperature for the given region. Although rare, during sudden periods of extreme low temperatures (record lows), fuel stations may not be adequately prepared with No. 2 Diesel fuel with sufficient winterization to resist wax formation or ?gelling?.
Associated Products (35)Associated Documents - January 8, 2014•Document ID: 10222037Service Bulletin/Repair InstructionsFUEL SYSTEM, GASOLINE; FUEL SYSTEM, DIESEL
- Mfr Comm. #:
- 01145520361691
- Date Added:
- September 26, 2022
- Manufacturer:
- AUDI
SummaryIn tank, fuel pump may be making a straining noise. Diesel fuel requires additive blending or ?winterization? to be useable at low temperatures. At temperatures below 20° F (-7° C), No. 2 Diesel with insufficient winterization blending may lose its fluidity due to wax separation. This may clog the fuel filter or in-tank filter, preventing the engine from operating properly. No. 2 Diesel is blended by refineries to various levels of winterization (minimum useable temperature) based on month, geographical location, and the 10th percentile minimum ambient air temperature for the given region. Although rare, during sudden periods of extreme low temperatures (record lows), fuel stations may not be adequately prepared with No. 2 Diesel fuel with sufficient winterization to resist wax formation or ?gelling?.
Associated Products (35)Associated Documents - January 8, 2014•Document ID: 10122176Service Bulletin/Repair InstructionsFUEL SYSTEM, GASOLINE:DELIVERY:FUEL PUMP; ENGINE
- Mfr Comm. #:
- A011455 2036169-
- Date Added:
- November 8, 2017
- Manufacturer:
- AUDI
SummaryThe MIL is on. DTC P0087 may be stored in the ECM. Drivability concerns such as hard starting/no starting are present. Outside temperature is sub-freezing. In tank, fuel pump may be making a straining noise. Diesel fuel requires additive blending or ?winterization? to be useable at low temperatures. At temperatures below 20° F (-7° C), No. 2 Diesel with insufficient winterization blending may lose its fluidity due to wax separation. This may clog the fuel filter or in-tank filter, preventing the engine from operating properly. No. 2 Diesel is blended by refineries to various levels of winterization (minimum useable temperature) based on month, geographical location, and the 10th percentile minimum ambient air temperature for the given region. Although rare, during sudden periods of extreme low temperatures (record lows), fuel stations may not be adequately prepared with No. 2 Diesel fuel with sufficient winterization to resist wax formation or ?gelling?.
Associated Products (42)Associated Documents - January 3, 2014•Document ID: 10122199Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- A911419 2026895-
- Date Added:
- November 8, 2017
- Manufacturer:
- AUDI
SummarySupersedes Technical Service Bulletin Group 91 number 11-16 dated October 5, 2011. During a Bluetooth call, the sound is difficult to hear for the other party. Voice recognition accuracy is poor. This TSB provides guidelines for testing microphones in a vehicle.
Associated Products (124)Associated Documents - December 23, 2013•Document ID: 10243768Service Bulletin/Repair InstructionsEQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
- Mfr Comm. #:
- Edition67
- Date Added:
- October 10, 2023
- Manufacturer:
- AUDI
SummaryAudi Elsa Newsletter
Associated Products (14)Associated Documents - December 20, 2013•Document ID: 10228345Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- 01135020301922
- Date Added:
- January 3, 2023
- Manufacturer:
- AUDI
SummaryA deformed oil seal behind the potentiometer (Figure 1) causes a linkage of the intake manifold flap adjustment to stick, which sets the DTCs.
Associated Products (19)Associated Documents - December 20, 2013•Document ID: 10225024Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- 01135020301922
- Date Added:
- October 31, 2022
- Manufacturer:
- AUDI
SummaryA deformed oil seal behind the potentiometer (Figure 1) causes a linkage of the intake manifold flap adjustment to stick, which sets the DTCs.
Associated Products (19)Associated Documents - December 20, 2013•Document ID: 10221997Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- 01135020301922
- Date Added:
- September 26, 2022
- Manufacturer:
- AUDI
SummaryA deformed oil seal behind the potentiometer (Figure 1) causes a linkage of the intake manifold flap adjustment to stick, which sets the DTCs.
Associated Products (19)Associated Documents - December 20, 2013•Document ID: 10121996Service Bulletin/Repair InstructionsSTEERING; POWER TRAIN; EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL; EQUIPMENT; ELECTRICAL SYSTEM
- Mfr Comm. #:
- A011350 2030192-
- Date Added:
- November 3, 2017
- Manufacturer:
- AUDI
SummarySupersedes Technical Service Bulletin Group 01 number 12-55 dated October 22, 2012. MIL on. DTCs are stored in the engine control module (ECM). Engine may have reduced power without significant loss of power or stalling. A deformed oil seal behind the potentiometer causes a linkage of the intake manifold flap adjustment to stick, which sets the DTCs. When the potentiometer is removed, the oil seal can be seen.
Associated Products (19)Associated Documents - December 9, 2013•Document ID: 10068131Service Bulletin/Repair InstructionsSTRUCTURE
- Mfr Comm. #:
- 2035673/3
- Date Added:
- May 23, 2016
- Manufacturer:
- AUDI
SummarySUMMARY TO BE PROVIDED ON A FUTURE DATE.
Associated Products (8)Associated Documents - December 9, 2013•Document ID: 10251027Service Bulletin/Repair InstructionsWHEELS
- Mfr Comm. #:
- 44134620103345
- Date Added:
- March 4, 2024
- Manufacturer:
- AUDI
SummaryTightening wheel bolts
Associated Products (257)Associated Documents - December 9, 2013•Document ID: 10121413Service Bulletin/Repair InstructionsSTRUCTURE; VISIBILITY:REARVIEW MIRRORS/DEVICES:EXTERIOR
- Mfr Comm. #:
- A661339 2035673-
- Date Added:
- October 31, 2017
- Manufacturer:
- AUDI
SummarySupersedes Technical Service Bulletin Group 66 number 13-38 dated November 15, 2013. Customer may report hearing wind noise from the front door area when the vehicle is driven at highway speeds. After diagnosis, it is determined that the source of the wind noise is the exterior rear view mirrors. The two main sources of wind noise from the exterior rear view mirrors are: the seam surrounding the turn signal lamp and the seam at the mirror base. The modifications explained in the Service section of this bulletin will effectively mitigate the wind noise symptom for the customer.
Associated Products (14)Associated Documents - December 9, 2013•Document ID: 10121408Service Bulletin/Repair InstructionsWHEELS; WHEELS:LUGS/NUTS/BOLTS/STUDS
- Mfr Comm. #:
- A441346 2010334-
- Date Added:
- October 31, 2017
- Manufacturer:
- AUDI
SummarySupersedes Technical Service Bulletin Group 44 number 12-32 dated August 2, 2012. Wheel bolt requires torque adjustment. Torque sticks, torque extension bars, and impact guns/wrenches are not approved by Audi of America, Inc., and should not be used to apply torque to wheel bolts. Always use a calibrated torque wrench to attain the correct wheel bolt torque and follow the proper wheel tightening procedure as outlined in Elsa. Proper use of a calibrated torque wrench ensures that all wheel bolts are tightened equally and reduces the chances of repeat repairs. Using methods other than a calibrated torque wrench to attain correct wheel bolt torque may lead to problems.
Associated Products (168)Associated Documents - December 9, 2013•Document ID: 10054859Service Bulletin/Repair InstructionsEQUIPMENT ADAPTIVE/MOBILITY
- Mfr Comm. #:
- TSB-44-13-46
- Date Added:
- March 6, 2014
- Manufacturer:
- AUDI
SummaryAUDI: ON CERTAIN VEHICLES, USE CALIBRATED TORQUE WRENCH AND NOT TORQUE STICKS, TORQUE EXTENSION BARS AND IMPACT GUNS/WRENCHES NOT APPROVED FOR USAGE ON WHEEL BOLTS BY MANUFACTURER, THAT CAN CAUSE DAMAGE TO BRAKE, STEERING WHEEL, HUB. MODEL 1995-2014 ALL. *PE
Associated Products (201)Associated Documents - December 6, 2013•Document ID: 10053944Service Bulletin/Repair InstructionsENGINE
- Mfr Comm. #:
- SB-48326
- Date Added:
- December 6, 2013
- Manufacturer:
- AUDI
SummaryAUDI: SEE DOCUMENT SEARCH BUTTON FOR OWNER LETTER. INFORMATION PROVIDED REGARDING WARRANTY EXTENSION ON CARBON BUILDUP REMOVAL, ENGINE CYLINDER HEAD SECONDARY AIR PORTS. MODELS 2009-2012. NO MODEL PROVIDED. *PE
Associated Products (68)Associated Documents - November 25, 2013•Document ID: 10204517Service Bulletin/Repair InstructionsEQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
- Mfr Comm. #:
- Audi Newsletter
- Date Added:
- December 13, 2021
- Manufacturer:
- AUDI
SummaryElso pro reminder.
Associated Products (41)Associated Documents - November 21, 2013•Document ID: 10251025Service Bulletin/Repair InstructionsSTEERING
- Mfr Comm. #:
- 44134420225638
- Date Added:
- March 4, 2024
- Manufacturer:
- AUDI
SummarySteering wheel shimmy, vibration and/or oscillation
Associated Products (144)Associated Documents - November 21, 2013•Document ID: 10204489Service Bulletin/Repair InstructionsSTEERING; SUSPENSION; TIRES; WHEELS
- Mfr Comm. #:
- 4413442022563 8
- Date Added:
- December 13, 2021
- Manufacturer:
- AUDI
SummaryCustomer feels vibration in the seat, vehicle floor, footwell, pedals, or steering wheel.
Associated Products (142)Associated Documents