MINI Cooper Service Bulletins (2016)
346 manufacturer communications on file.
- August 1, 2016•Document ID: 10147580Service Bulletin/Repair InstructionsSERVICE BRAKES, HYDRAULIC:ANTILOCK/TRACTION CONTROL/ELECTRONIC LIMITED SLIP:WHEEL SPEED SENSOR/TONE RING
- Mfr Comm. #:
- M340216
- Date Added:
- November 13, 2018
- Manufacturer:
- MINI
SummaryDRIVING STABILIZATION CONTROL FAILURE: ABS/DSC INSTRUMENT LAMPS LIT- DIAGNOSIS. 1. DSC's fault codes stored from two different wheel speed sensors (both front or both rear): 4809B0 - wheel speed sensor - front left - drive off recognition faulty and 4809CD - wheel speed sensor - front right - drive off recognition faultyor 4809B9 - wheel speed sensor - rear left - drive off recognition faultyand 480686 - wheel speed sensor - rear right - drive off recognition faulty. 2. Next ignition ON (after above codes stored). a) DME fault can occur:1F054D - drive, safety function: Drive power output reduced, DSC signals implausible and b) Malfunction Indicator Lamp (MIL) may light up. Faulty drive off recognition due to: a towing operation with a raised axle operation of the vehicle on the vehicle hoist operation of the vehicle on the roller test stand DSC diagnosis recognizes implausible wheel speeds, so no control is possible. DME fault is entered on safety grounds since the DSC fault still exists after a terminal change and may only be removed while driving.
Associated Products (6)Associated Documents - August 1, 2016•Document ID: 10147579Service Bulletin/Repair InstructionsSERVICE BRAKES, HYDRAULIC:ANTILOCK/TRACTION CONTROL/ELECTRONIC LIMITED SLIP:WHEEL SPEED SENSOR/TONE RING
- Mfr Comm. #:
- M340116
- Date Added:
- November 13, 2018
- Manufacturer:
- MINI
SummaryDRIVING STABILIZATION CONTROL FAILURE: ABS/DSC INSTRUMENT LAMPS LIT. ABS/DSC lamps lit in instrument cluster. Fault codes may be saved in the DSC control unit: 480AAD - wheel speed sensor - rear left - smoke monitoring 480AAC - wheel speed sensor - rear left - unexpected jump in the signal 4809B9 - wheel speed sensor - rear left - driving off recognition faulty 480716 - wheel speed sensor - rear left - plausibility: direction of rotation 4809B7 - wheel speed sensor - rear left - missing tooth 480719 - wheel speed sensor - rear right - plausibility: direction of rotation 480686 - wheel speed sensor - rear right - driving off recognition faulty 480AB3 - wheel speed sensor - rear right - unexpected jump in the signal 480AB4 - wheel speed sensor - rear right - smoke monitoring 4809C2 - wheel speed sensor - rear right - missing tooth Rear wheel pulse generator (wheel speed sensor) retaining screw is loose, missing or broken.
Associated Products (6)Associated Documents - August 1, 2016•Document ID: 10147578Service Bulletin/Repair InstructionsSUSPENSION:FRONT:SPRINGS:LEAF SPRING ASSEMBLY:U-BOLT, LEAF SPRING TO AXLE
- Mfr Comm. #:
- M310115
- Date Added:
- November 13, 2018
- Manufacturer:
- MINI
SummaryA groaning and/or squeaking noise from the front axle occurs when turning at low speeds or idle.
Associated Products (6)Associated Documents - August 1, 2016•Document ID: 10147576Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING; ELECTRICAL SYSTEM
- Mfr Comm. #:
- M111016
- Date Added:
- November 13, 2018
- Manufacturer:
- MINI
Summary"THERMOSTAT FAULTS (B-ENGINES). The Service Engine Soon light is on. A Check Control message for ""Engine overheated"" and or ""Exercise caution!"" may also display. The following fault codes may be stored in the DME: 1D2401 - Characteristic map thermostat, actuation: Short circuit to B+ 1D2402 - Characteristic map thermostat, actuation: Short circuit to ground 1D2404 - Characteristic map thermostat, actuation: Line disconnection During diagnosis the coolant may be found to be discolored. Insulation on the wiring for the map activation thermostat (heating element) may be damaged. Exposed wiring may allow coolant to enter the harness. This may cause damage to the heating element."
Associated Products (6)Associated Documents - July 1, 2016•Document ID: 10146987Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC.
- Mfr Comm. #:
- M650616
- Date Added:
- November 5, 2018
- Manufacturer:
- MINI
SummaryFM RADIO INTERFERENCE. Poor radio reception quality, short interruptions or a hissing noise in FM radio mode on weak radio stations. The wire harness which is run underneath the amplifier may be influenced by Electro-magnetic interference (EMI) from the amplifier. This can generate noise(s) under certain circumstances.
Associated Products (5)Associated Documents - July 1, 2016•Document ID: 10146986Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- M120516
- Date Added:
- November 5, 2018
- Manufacturer:
- MINI
Summary"MSA FEATURE DOES NOT FUNCTION AFTER JCW RETROFIT. After retrofitting JCW kit, the Automatic ""Start/Stop"" function (MSA) no longer works. DSC module software."
Associated Products (3)Associated Documents - June 1, 2016•Document ID: 10151390Service Bulletin/Repair InstructionsEQUIPMENT:APPLIANCE:AIR CONDITIONER; EQUIPMENT
- Mfr Comm. #:
- M640216
- Date Added:
- December 10, 2018
- Manufacturer:
- MINI
SummaryAir Conditioning Refrigerant R1234yf Introduction. INFORMATION Several precautions need to be observed when working on automotive air conditioning systems: Always wear eye protection and gloves while handling refrigerant or servicing air conditioning system. Avoid breathing R1234yf lubricant vapor or mist. Use only approved service equipment to discharge A/C systems. If refrigerant or compressor oil contacts the skin or eyes, large quantities of cool water should be used to flush the affected area. Never heat a refrigerant container with an open flame. Keep all refrigerant away from open flames. Under no circumstances should R1234yf service equipment or vehicle A/C systems be pressure tested or leak tested with air/R1234yf mixtures. NOTE: The use of compressed air (shop air) for leak detection in an R1234yf system can contaminate the system and/or refrigerant with moisture. Leak detection equipment that meets the SAE J2791 standard will work with R1234yf Never use fittings for an R12 or R134a system on an R1234yf system. Any difficulty in connecting service equipment may be an indication of refrigerant/equipment incompatibility with the vehicle's system. Always carefully ascertain the type of refrigerant used in the vehicle's system before performing service. Labels on underside of hood, will detail which refrigerant is used in the air conditioning system. Service the vehicle with compatible recycling equipment ONLY. Attempts to adapt and use incompatible service tools will destroy both the vehicle's air conditioning system and the service tool. Never use any R-12/R134a service tools on R1234yf systems. Tools, such as manifold gauge sets, retain small amounts of refrigerant and lubricant. Attempting to use the same equipment on both R-12/R134a and R1234yf vehicles will contaminate the air conditioning systems. Obtain and use the correct type of refrigerant recovery/recycling machine. Follow the directions included in the machine's instruction manual. WARR
Associated Products (8)Associated Documents - June 1, 2016•Document ID: 10151389Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL
- Mfr Comm. #:
- M620515
- Date Added:
- December 10, 2018
- Manufacturer:
- MINI
SummaryThe Clock in the Instrument Cluster Loses time This Service Information Bulletin supersedes SI M62 05 15 dated June 2016. The time displayed in the instrument cluster (KOMBI) may lose a few minutes each week and the clock needs to be adjusted periodically.
Associated Products (8)Associated Documents - June 1, 2016•Document ID: 10151388Service Bulletin/Repair InstructionsEQUIPMENT
- Mfr Comm. #:
- M120815
- Date Added:
- December 10, 2018
- Manufacturer:
- MINI
Summary"INFORMATION Covered under the terms of the MINI New Passenger Car Limited Warranty or the MINI NEXT Certified Pre-Owned Limited Warranty. This repair is also covered by the terms of the State-specific Emissions Warranty (dependent on the vehicle's model year, state of registration and its inclusion on the ""model-specific"" list of covered components). The MINI NEXT Certified Pre-Owned Limited Warranty applies to MINI vehicles that have and are still within the MINI NEXT Certified Pre-Owned Limited Warranty coverage period, but beyond the Emissions Warranty coverage that applies. If you are using a Main labor code for another repair, use the Plus code labor operation 00 00 556 instead. Refer to KSD2 for the corresponding flat rate unit (FRU) allowances. Vehicle Programming and Coding Control module failures that occur during programming: Please claim these consequential repairs under the defect code listed in this bulletin and use the applicable KSD2 labor operations. Other Repairs Control module failures that occur prior to programming: When covered under an applicable limited warranty, claim these repairs using the applicable defect code and labor operations in KSD2. "
Associated Products (6)Associated Documents - June 1, 2016•Document ID: 10151386Service Bulletin/Repair InstructionsEQUIPMENT
- Mfr Comm. #:
- M110916
- Date Added:
- December 10, 2018
- Manufacturer:
- MINI
SummaryVANOS AND VANOS CENTRAL BOLT IDENTIFICATION. INFORMATION Replacing the VANOS gear central bolts or the VANOS gear will require a component inspection when the engine assembly has been previously replaced in one of the vehicles listed above. Ordering the parts via the model, production or VIN may provide the incorrect part numbers. The procedure below will help identify which VANOS parts are installed in the replacement engine. 11 36 7 608 788 Inlet adjustment unit Oulet adjustment unit Refer to the ETK and the repair instructions for one time use fastener and component information regarding additional screws, gaskets and seals.
Associated Products (8)Associated Documents - May 1, 2016•Document ID: 10151349Service Bulletin/Repair InstructionsEQUIPMENT; EQUIPMENT:ELECTRICAL; ELECTRICAL SYSTEM
- Mfr Comm. #:
- M840114
- Date Added:
- December 10, 2018
- Manufacturer:
- MINI
SummaryBluetooth Connection Failures This Service Information bulletin supersedes SI M84 01 14 dated February 2016.. There are various connectivity failures with the following devices: Apple iPhones Samsung S6 and the S6 Edge. Connectivity failure examples are: Call disconnection - Call is transferred back to the handset. In some instances the call is then transferred back to the vehicle. Contact List incomplete General connection failures Apple iOS software (issue started with iOS 8.3 continues with iOS 9.x and its variants) Samsung S6 and S6 Edge device firmware
Associated Products (25)2019 MINI Cooper2018 MINI Cooper2017 MINI Clubman2017 MINI Cooper2016 MINI Cooper2016 MINI Cooper Convertible2016 MINI Countryman2015 MINI Cooper2015 MINI Countryman2014 MINI Clubman2014 MINI Cooper2014 MINI Countryman2013 MINI Clubman2013 MINI Cooper2013 MINI Cooper Coupe2013 MINI Cooper Roadster2012 MINI Cooper2012 MINI Cooper Coupe2012 MINI Cooper Roadster2011 MINI Cooper+ 5 moreAssociated Documents - May 1, 2016•Document ID: 10151348Service Bulletin/Repair InstructionsFORWARD COLLISION AVOIDANCE
- Mfr Comm. #:
- M660216
- Date Added:
- December 10, 2018
- Manufacturer:
- MINI
SummaryCollision warning and Pedestrian Warning Failed. While driving, a Check Control Message (CCM) is displayed advising of the following: Front collision warning failed Pedestrian detection failed The following fault code is stored in the KAFAS (Camera-based Driver Assistance System): 0X800AC4 - Camera calibration failed CAUSE The KAFAS camera is not properly mounted and secured to the mounting bracket on the windshield, And/ or The mounting bracket glued to the windshield is not installed correctly. The pictures below show both incorrect and correct installation. KAFAS camera mounting bracket not secured correctly to the windshield. Notice the spacing between the white outline and the bracket. Possible solutions: Verify the KAFAS camera is installed (seated) properly in its bracket Replace the KAFAS camera Replace the windshield
Associated Products (8)Associated Documents - May 1, 2016•Document ID: 10151347Service Bulletin/Repair InstructionsEXTERIOR LIGHTING:HEADLIGHTS; EXTERIOR LIGHTING
- Mfr Comm. #:
- M630116
- Date Added:
- December 10, 2018
- Manufacturer:
- MINI
SummaryDelay in Automatic Driving Light Switching on/off. When driving out of a tunnel or exiting underground parking, the automatic driving light remains switched on for two minutes. Shut-off period varies based on detected situation. This is normal operational behavior.
Associated Products (21)2016 MINI Cooper2016 MINI Cooper Convertible2016 MINI Countryman2015 MINI Cooper2015 MINI Countryman2014 MINI Clubman2014 MINI Cooper2014 MINI Countryman2013 MINI Clubman2013 MINI Cooper2013 MINI Cooper Coupe2013 MINI Cooper Roadster2012 MINI Cooper2012 MINI Cooper Coupe2012 MINI Cooper Roadster2011 MINI Cooper2010 MINI Cooper2009 MINI Cooper2009 MINI Cooper Convertible2008 MINI Cooper+ 1 moreAssociated Documents - May 1, 2016•Document ID: 10151346Service Bulletin/Repair InstructionsENGINE
- Mfr Comm. #:
- M120316
- Date Added:
- December 10, 2018
- Manufacturer:
- MINI
Summary"Service Action: Program Control Units (DME - VANOS). If the engine has been off for long period of time, when started it may run very rough at idle with the Service Engine Soon (MIL) light on. The engine power is reduced and a Check Control Message (CCM) ""Drive Faulty; Drive at moderate speed"" is also displayed. If the engine is then stopped and restarted the problem would no longer be present."
Associated Products (6)Associated Documents - April 1, 2016•Document ID: 10216767Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING; POWER TRAIN
- Mfr Comm. #:
- SIM120216
- Date Added:
- August 1, 2022
- Manufacturer:
- MINI
SummaryEngine will not start (no crank). The engine will not crank or the engine loses power while driving, followed by a no crank situation.
Associated Products (1)Associated Documents - April 1, 2016•Document ID: 10216708Service Bulletin/Repair InstructionsPOWER TRAIN
- Mfr Comm. #:
- M310316M0604
- Date Added:
- August 1, 2022
- Manufacturer:
- MINI
SummaryMini parts logistics TEC 26 turbo charger return
Associated Products (4)Associated Documents - April 1, 2016•Document ID: 10151294Service Bulletin/Repair InstructionsVISIBILITY
- Mfr Comm. #:
- M610116
- Date Added:
- December 10, 2018
- Manufacturer:
- MINI
SummaryFront Windshield Wiper Noises. Customer complains wipers are noisy or chattering during wiper operation. CAUSE Wiper arms out of adjustment and/or windshield cowl misaligned.
Associated Products (8)Associated Documents - April 1, 2016•Document ID: 10151293Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- M510316
- Date Added:
- December 10, 2018
- Manufacturer:
- MINI
SummaryAir Intake Makes Rattle Noise At Engine Idle. Engine has rattle noise from engine compartment. Check Hyperlink for video of rattle noise at engine idle. http://tinyurl.com/zwb8e6s Worn buffer in the battery tray
Associated Products (7)Associated Documents - April 1, 2016•Document ID: 10151291Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING; ENGINE AND ENGINE COOLING:EXHAUST SYSTEM
- Mfr Comm. #:
- M120815
- Date Added:
- December 10, 2018
- Manufacturer:
- MINI
Summary"Reduced Engine Power with Exhaust Camshaft Sensor Faults Stored. The engine power is reduced and a Check Control Message (CCM) ""Drive Faulty; Drive at moderate speed"" is displayed. The following camshaft position sensor fault is stored in the DME: Fault 130F11: Exhaust camshaft sensor, signal: not plausible As a result, the engine power is reduced and the following fault also is set: Fault 120408: Charging pressure control: Switch-off, pressure build-up blocked CAUSE DME software error"
Associated Products (4)Associated Documents - April 1, 2016•Document ID: 10151288Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- M110715
- Date Added:
- December 10, 2018
- Manufacturer:
- MINI
Summary"This Service Information bulletin and attachment supersedes SI M11 07 15 dated October 2015.. Excessive amount of water condensation may accumulate in the engine's crankcase. With prolonged vehicle storage, water condensation in engine's oil may cause oil pump malfunction. AFFECTED VEHICLES This Service Action involves F55 and F56 models (MINI Cooper with the B38 engine) produced from 07/05/2014 to 02/24/2015 that are: Still a ""new vehicle"" in dealer inventory (no in-service date reported), and the Current odometer mileage is 155 or less. Vehicles which require this Service Action to be completed will show it as ""Open"" when checked either in the ""Service Menu"" of DCSnet (Dealer Communication System) or with the Key Reader. Increased number of colds starts and stops during a vehicle's transportation and storage process (prior to customer delivery)."
Associated Products (7)Associated Documents