Mazda CX-50 Service Bulletins (2023)
351 manufacturer communications on file.
- January 23, 2023•Document ID: 10230902Service Bulletin/Repair InstructionsSTRUCTURE
- Mfr Comm. #:
- 09-006-23
- Date Added:
- February 2, 2023
- Manufacturer:
- MAZDA
SummaryWhen encountering a vehicle with paint damage, refer to the "Mazda Paint Warranty Guide" to determine cause, prevention, remedy, and warranty coverage (if applicable).
Associated Products (38)2023 Mazda CX-302023 Mazda CX-52023 Mazda CX-502023 Mazda CX-92023 Mazda Mazda32023 Mazda MX-302022 Mazda CX-302022 Mazda CX-52022 Mazda CX-92022 Mazda Mazda32022 Mazda MX-302022 Mazda MX-52021 Mazda CX-32021 Mazda CX-302021 Mazda CX-52021 Mazda CX-92021 Mazda Mazda32021 Mazda Mazda62021 Mazda MX-52020 Mazda CX-3+ 18 moreAssociated Documents - January 23, 2023•Document ID: 10230880Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- SA-006/23
- Date Added:
- February 2, 2023
- Manufacturer:
- MAZDA
SummarySome customers may complain about the infotainment system and/or the MyMazda App showing incorrect clock and/or tire pressures and/or tire pressure missing. This may be caused by: - Incorrect calendar entry (month/day/year) after a battery disconnect - Infotainment system software update. - BCM TPMS unlearn during vehicle storage or transport. - Wheel/Tire change
Associated Products (18)Associated Documents - January 23, 2023•Document ID: 10230865Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- RF-23-01
- Date Added:
- February 2, 2023
- Manufacturer:
- MAZDA
SummaryWhen servicing SKYACTIV engine vehicles requiring to replace the Oil Galley Plug and Crush Washer, order the required part numbers below. These parts are not listed in GEPC and were previously listed as "non-serviceable" in the cylinder block diagram.
Associated Products (64)2023 Mazda CX-302023 Mazda CX-52023 Mazda CX-502023 Mazda CX-92023 Mazda Mazda32023 Mazda MX-52022 Mazda CX-302022 Mazda CX-52022 Mazda CX-92022 Mazda Mazda32022 Mazda MX-52021 Mazda CX-32021 Mazda CX-302021 Mazda CX-52021 Mazda CX-92021 Mazda Mazda22021 Mazda Mazda32021 Mazda Mazda62021 Mazda MX-52020 Mazda CX-3+ 44 moreAssociated Documents - January 19, 2023•Document ID: 10230878Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- SA-005/22
- Date Added:
- February 2, 2023
- Manufacturer:
- MAZDA
SummaryCustomers having MAZDA CONNECT concerns should have their vehicle repaired using the following repair procedure.
Associated Products (18)Associated Documents - January 13, 2023•Document ID: 10230877Service Bulletin/Repair InstructionsLATCHES/LOCKS/LINKAGES
- Mfr Comm. #:
- SA-004/23
- Date Added:
- February 2, 2023
- Manufacturer:
- MAZDA
SummarySome customers may report hearing an unusual noise coming from the power liftgate (PLG) when it is unlatching to open or latching closed. This is caused by an internal fault in the liftgate latch and/or loose bolts holding the latch to the liftgate.
Associated Products (5)Associated Documents - January 10, 2023•Document ID: 10230905Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 16-001-23
- Date Added:
- February 2, 2023
- Manufacturer:
- MAZDA
SummarySome vehicles may experience the symptoms mentioned below, which can be fixed with the latest software update (Version 7000C0A-NA05_11022). NOTE: Over-the-air update (OTA) for MAZDA CONNECT is now available in the U.S. and Canada (CX-50 only). The instructions for OTA are posted in MGSS and on MUSA for the customer. The update can also be performed using a USB memory stick.
Associated Products (1)Associated Documents - January 3, 2023•Document ID: 10230895Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 09-002-23
- Date Added:
- February 2, 2023
- Manufacturer:
- MAZDA
SummarySome customers may complain that the front seat warmers are inoperative or cannot be turned OFF and DTC B1520:49 may be stored. This may be caused by an electrical noise of the front seat warmer control unit. To correct this issue, the anti-electric noise performance of the front seat warmer control unit has been improved.
Associated Products (1)Associated Documents - January 3, 2023•Document ID: 10230894Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 09-001-23
- Date Added:
- February 2, 2023
- Manufacturer:
- MAZDA
SummarySome vehicles may exhibit DTC U3000:04 (Telematics communication unit internal malfunction) stored after the connected service contract has been discontinued (only vehicles in which the customer opted out of CV services are affected - CSP04). This is caused by improper control software of telematics communication unit. To eliminate this concern, the control software of telematics communication unit has been modified.
Associated Products (14)Associated Documents - December 22, 2022•Document ID: 10228654Service Bulletin/Repair InstructionsSTRUCTURE; VISIBILITY:SUN/MOON ROOF ASSEMBLY
- Mfr Comm. #:
- SA-032-22a
- Date Added:
- January 5, 2023
- Manufacturer:
- MAZDA
SummarySome customers may report a rattle from the sunroof (panorama roof) area. Make sure to read the complete repair procedure before attempting any repairs as the sunroof may have rattles from more than one location.
Associated Products (1)Associated Documents - December 14, 2022•Document ID: 10228650Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- SA-004-22g
- Date Added:
- January 5, 2023
- Manufacturer:
- MAZDA
SummaryCustomers having MAZDA CONNECT concerns should have their vehicle repaired using the following repair procedure.
Associated Products (17)Associated Documents - December 13, 2022•Document ID: 10228653Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- SA-019-22c
- Date Added:
- January 5, 2023
- Manufacturer:
- MAZDA
SummaryMAZDA CONNECTED SERVICES Frequently Asked Questions (FAQ)
Associated Products (18)Associated Documents - December 13, 2022•Document ID: 10228652Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- SA-017-22d
- Date Added:
- January 5, 2023
- Manufacturer:
- MAZDA
SummarySome customers may complain about any of the following: * Infotainment Center Display does not provide the Authorization Code during the MyMazda App Connected Vehicle enrollment. * Remote function(s) inoperative. - Engine Start / Stop - Door Lock / Unlock - Lights ON / OFF * MAZDA CONNECT connected vehicle reception strength icon shows "X" or " ". Confirm the customer's phone and vehicle have good to strong reception during the concern as shown in the table below. * If the reception is weak, move the vehicle to a location where the reception is good to strong as shown in the table, then try to get the Authorization Code and/or operate the remote functions before proceeding to the Repair Procedure if there is still an issue. * If the reception is good to strong, proceed to the Repair Procedure
Associated Products (18)Associated Documents - December 7, 2022•Document ID: 10228651Service Bulletin/Repair InstructionsEQUIPMENT
- Mfr Comm. #:
- SA-016-22a
- Date Added:
- January 5, 2023
- Manufacturer:
- MAZDA
SummaryThere are currently 2 methods for cutting a new auxiliary key blank. A. Auxiliary Key Trace Cut Method B. Auxiliary Key Code Cut Method
Associated Products (64)2023 Mazda CX-302023 Mazda CX-52023 Mazda CX-502023 Mazda CX-92023 Mazda Mazda32023 Mazda MX-302023 Mazda MX-52022 Mazda CX-302022 Mazda CX-52022 Mazda CX-92022 Mazda Mazda32022 Mazda MX-302022 Mazda MX-52021 Mazda CX-32021 Mazda CX-302021 Mazda CX-52021 Mazda CX-92021 Mazda Mazda22021 Mazda Mazda32021 Mazda Mazda6+ 44 moreAssociated Documents - December 6, 2022•Document ID: 10228655Service Bulletin/Repair InstructionsVISIBILITY:GLASS, SIDE/REAR; EQUIPMENT
- Mfr Comm. #:
- SA-045-22a
- Date Added:
- January 5, 2023
- Manufacturer:
- MAZDA
SummaryThe purpose of this Service Alert is to remind dealers to keep the protective films on the piano black door garnishes attached until just before delivering the vehicle to the customer. The protective films are attached on new vehicles when shipped from the factory in order to avoid being scratched during transportation and while in dealer stock.
Associated Products (13)Associated Documents - December 5, 2022•Document ID: 10228656Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- SA-077-22
- Date Added:
- January 5, 2023
- Manufacturer:
- MAZDA
SummarySome vehicles may experience the rear differential oil temperature sensor PID (OIL_TEMP_SEN) on MDARS displaying the wrong value. This is due to a software bug (glitch) with MDARS.
Associated Products (1)Associated Documents - December 1, 2022•Document ID: 10228648Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- MT-004-22
- Date Added:
- January 5, 2023
- Manufacturer:
- MAZDA
SummarySome vehicles may experience the Check Engine Light ON with DTC P0171 (Fuel Trim too Lean) and possibly DTCs P030X (Misfire). Vehicles having this concern should use the following Inspection/Repair procedure.
Associated Products (58)2023 Mazda CX-302023 Mazda CX-52023 Mazda CX-502023 Mazda CX-92023 Mazda Mazda32023 Mazda MX-52022 Mazda CX-302022 Mazda CX-52022 Mazda CX-92022 Mazda Mazda32022 Mazda MX-52021 Mazda CX-32021 Mazda CX-302021 Mazda CX-52021 Mazda CX-92021 Mazda Mazda32021 Mazda Mazda62021 Mazda MX-52020 Mazda CX-32020 Mazda CX-30+ 38 moreAssociated Documents - November 22, 2022•Document ID: 10226823Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- 01-015-22
- Date Added:
- December 2, 2022
- Manufacturer:
- MAZDA
SummarySome customers may complain that the CHECK ENGINE light turns ON after a cold start, then exhibits lack of power from the engine with DTC P061B:00 stored in memory. This is caused by improper control software of the PCM. To eliminate this concern, the PCM control software has been modified.
Associated Products (1)Associated Documents - November 18, 2022•Document ID: 10226814Service Bulletin/Repair InstructionsSUSPENSION
- Mfr Comm. #:
- 02-004-22a
- Date Added:
- December 2, 2022
- Manufacturer:
- MAZDA
SummarySome customers may complain of signs of oil on the struts or shock absorbers. In most cases the oil that is present is normal, and a result of the oil that remains on the shaft during the normal sweeping process of the shaft seal. Follow the inspection guidelines below to determine if the condition is a result of the normal sweeping process or a failure of the shaft seal.
Associated Products (160)2023 Mazda CX-302023 Mazda CX-52023 Mazda CX-502023 Mazda CX-92023 Mazda Mazda32023 Mazda MX-52022 Mazda CX-302022 Mazda CX-52022 Mazda CX-92022 Mazda Mazda32022 Mazda MX-302022 Mazda MX-52021 Mazda CX-32021 Mazda CX-302021 Mazda CX-52021 Mazda CX-92021 Mazda Mazda32021 Mazda Mazda62021 Mazda MX-52020 Mazda CX-3+ 140 moreAssociated Documents - November 14, 2022•Document ID: 10226924Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- SA-075-22
- Date Added:
- December 2, 2022
- Manufacturer:
- MAZDA
SummaryIf you encounter any type of electrical concern (e.g, dead battery, engine no start, DTC(s) stored...), interview the customer before proceeding with normal MGSS diagnosis by asking if any aftermarket devices have been installed. Aftermarket devices may be the cause of the electrical concern. Below are a few examples of unusual electrical concerns caused by aftermarket devices. Examples: 1. Devices connected to the DLC-2 (battery discharge/DTC stored) 2. Cell phone charger/accessory in 12V socket (engine no start or unable to turn off) 3. GPS tracking device (engine no start/battery discharge) 4. Dash cam (DTC stored) 5. Non-certified USB cable (Apple CarplayâÃÂâ/ Android AutoâÃÂâ will not connect) 6. Over-sized wheels/tires (incorrect GPS location)
Associated Products (119)2023 Mazda CX-302023 Mazda CX-52023 Mazda CX-502023 Mazda CX-92023 Mazda Mazda32023 Mazda MX-52022 Mazda CX-302022 Mazda CX-52022 Mazda CX-92022 Mazda Mazda32022 Mazda MX-52021 Mazda CX-32021 Mazda CX-302021 Mazda CX-52021 Mazda CX-92021 Mazda Mazda22021 Mazda Mazda32021 Mazda Mazda62021 Mazda MX-52020 Mazda CX-3+ 99 moreAssociated Documents - November 14, 2022•Document ID: 10226822Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- 01-014-22
- Date Added:
- December 2, 2022
- Manufacturer:
- MAZDA
SummarySome customers may complain of lack of power during full-throttle acceleration after cold start. A check engine light may turn on for misfire caused by temporary over rich fuel injection. This concern only occurs with the condition that the coolant temperature at the time of engine start is about 32 F (0 C) or less. This is caused by improper control software of the PCM. To eliminate this concern, the control software of the PCM has been modified.
Associated Products (1)Associated Documents