Mazda CX-30 Service Bulletins (2021)
606 manufacturer communications on file.
- March 15, 2021•Document ID: 10189950Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING; EQUIPMENT ADAPTIVE/MOBILITY
- Mfr Comm. #:
- SA-012-21c
- Date Added:
- April 6, 2021
- Manufacturer:
- MAZDA
SummaryMAZDA CONNECTED SERVICES - FREQUENTLY ASKED QUESTIONS (FAQ): Index: General Questions, Setup and Getting Started, Registration / Enrollment, WI-FI General Information, WI-FI How-To, WI-FI Trial Period, Interacting With The App, Service Issues, Troubleshooting, Reception Level Inspection, Dealer Processes, Conditions for Remote Engine Start Will Not Function, Conditions for Remote Engine Start Function Will turn engine OFF, Educational Videos, Resources
Associated Products (4)Associated Documents - March 15, 2021•Document ID: 10189797Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- MT-001-21
- Date Added:
- April 5, 2021
- Manufacturer:
- MAZDA
SummaryIf you encounter any type of electrical concern (e.g, dead battery, engine no start, DTC(s) stored...), interview the customer before proceeding with normal Workshop Manual diagnosis. Aftermarket devices may be the cause of the electrical concern. Ask the customer if any aftermarket devices have been installed.
Associated Products (7)Associated Documents - March 11, 2021•Document ID: 10189854Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- SA-005-21c
- Date Added:
- April 5, 2021
- Manufacturer:
- MAZDA
SummarySome vehicles may have a "Low Battery Risk. Start Vehicle to Charge 12V Battery" warning message in the instrument cluster and a 30 second alarm sound. This is caused by the vehicle's electrical control area network (CAN) entering "Sleep Mode" when the network awake time reaches 30 cumulative minutes without the engine running.
Associated Products (2)Associated Documents - March 8, 2021•Document ID: 10189946Service Bulletin/Repair InstructionsEQUIPMENT ADAPTIVE/MOBILITY; ELECTRICAL SYSTEM:ADAS:HUD:CAMERA/SENSOR; VISIBILITY
- Mfr Comm. #:
- SA-022-21
- Date Added:
- April 6, 2021
- Manufacturer:
- MAZDA
SummaryWhen performing the MGSS Workshop Manual 360ð View Monitor System Aiming Procedure, M-MDS may show error message "Procedure unsuccessful". This may be caused by light glare on the SST.
Associated Products (5)Associated Documents - March 8, 2021•Document ID: 10189871Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- SA-020-21
- Date Added:
- April 5, 2021
- Manufacturer:
- MAZDA
SummaryKey Transmitter Power Saving Function: When the key transmitter Power Saving Function is turned ON, transmitter battery power consumption is restricted, thereby extending the transmitter battery life.
Associated Products (5)Associated Documents - February 23, 2021•Document ID: 10188094Service Bulletin/Repair InstructionsEQUIPMENT; ELECTRICAL SYSTEM
- Mfr Comm. #:
- SSPC4
- Date Added:
- March 3, 2021
- Manufacturer:
- MAZDA
SummaryOn certain CX-30 vehicles equipped with the Bose audio option, a loud static noise may be exhibited from some or all of the speakers due to inappropriate control program of the audio amplifier. The noise can occur regardless of the driving status of the vehicle and the engine on/off.
Associated Products (1)Associated Documents - February 22, 2021•Document ID: 10188101Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; LATCHES/LOCKS/LINKAGES; EQUIPMENT; ENGINE AND ENGINE COOLING
- Mfr Comm. #:
- SSPC5
- Date Added:
- March 3, 2021
- Manufacturer:
- MAZDA
SummaryMazda Motor Corporation has decided to conduct a Special Service Program impacting certain 2019-2021 Mazda3 and 2020-2021 CX-30 vehicles built at MC and MMVO. Please see the descriptions, models, years, and VIN Ranges below. NOTE: A new MDRT Tool will be sent to all dealers, please read the attached MDRT Tool document arriving with this email. NOTE: The subject vehicles are affected by one, two or three concerns depending on production date, (Battery Drain, and/or MRCC and/or Theft-deterrent system). Some of the subject vehicles are also affected by SSPC4 and Safety Recall 4621B which officially addresses radio static noise from speakers, and/or rear hatch may fall when parked on an incline.
Associated Products (2)Associated Documents - February 22, 2021•Document ID: 10188031Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING; EQUIPMENT ADAPTIVE/MOBILITY
- Mfr Comm. #:
- SA-012-21a
- Date Added:
- March 3, 2021
- Manufacturer:
- MAZDA
SummaryMAZDA CONNECTED SERVICES - FREQUENTLY ASKED QUESTIONS (FAQ): Index: General Questions, Setup and Getting Started, Registration / Enrollment, WI-FI General Information, WI-FI How-To, WI-FI Trial Period, Interacting With The App, Service Issues, Troubleshooting, Reception Level Inspection, Dealer Processes, Conditions for Remote Engine Start Will Not Function, Conditions for Remote Engine Start Function Will turn engine OFF, Educational Videos, Resources
Associated Products (4)Associated Documents - February 22, 2021•Document ID: 10188029Service Bulletin/Repair InstructionsLATCHES/LOCKS/LINKAGES; EQUIPMENT ADAPTIVE/MOBILITY; EXTERIOR LIGHTING
- Mfr Comm. #:
- SA-013-21a
- Date Added:
- March 3, 2021
- Manufacturer:
- MAZDA
SummaryIMPORTANT NOTE: Some 2020 Mazda3 vehicles may have incorrect infotainment software version 10042 installed. The incorrect software will cause MyMazda App Connected Vehicle enrollment errors. Go to SSPC1. Some customers may complain about any of the following: Infotainment Center Display does not provide the Authorization Code during the MyMazda App, Connected Vehicle enrollment (and Software Update Error message on 2020 Mazda3 only). Remote function(s) inoperative. Engine Start / Stop, Door Lock / Unlock, Lights ON / OFF
Associated Products (4)Associated Documents - February 10, 2021•Document ID: 10188032Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- SA-005-21a
- Date Added:
- March 3, 2021
- Manufacturer:
- MAZDA
SummarySome vehicles may have a "Low Battery Risk. Start Vehicle to Charge 12V Battery" warning message in the instrument cluster and a 30 second alarm sound. This is caused by the vehicle's electrical control area network (CAN) entering "Sleep Mode" when the network awake time reaches 30 cumulative minutes without the engine running.
Associated Products (2)Associated Documents - February 8, 2021•Document ID: 10188016Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 01-006-21-3779
- Date Added:
- March 3, 2021
- Manufacturer:
- MAZDA
SummaryThis service bulletin provides testing and charging procedures in order to promote proper battery maintenance, to deliver new vehicles with fully charged batteries, and to reduce unnecessary battery replacement cost. For new vehicles in stock at the dealer, inspect and maintain the battery periodically according to the repair procedure.
Associated Products (8)Associated Documents - February 8, 2021•Document ID: 10188015Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 01-005-21-3778
- Date Added:
- March 3, 2021
- Manufacturer:
- MAZDA
SummaryThe Mazda DCA-8000PM is required for all warranty battery testing. If the Mazda DCA-8000PM is not used, incorrect battery testing may result in unnecessary battery replacement. Use the following test procedures in this Service Bulletin to test Mazda vehicle batteries and to generate a Warranty Code.
Associated Products (8)Associated Documents - February 2, 2021•Document ID: 10188030Service Bulletin/Repair InstructionsEQUIPMENT ADAPTIVE/MOBILITY; ENGINE AND ENGINE COOLING
- Mfr Comm. #:
- SA-012-21
- Date Added:
- March 3, 2021
- Manufacturer:
- MAZDA
SummaryMAZDA CONNECTED SERVICES - FREQUENTLY ASKED QUESTIONS (FAQ): Index: General Questions, Setup and Getting Started, Registration / Enrollment, WI-FI General Information, WI-FI How-To, WI-FI Trial Period, Interacting With The App, Service Issues, Troubleshooting, Reception Level Inspection, Dealer Processes, Conditions for Remote Engine Start Will Not Function, Conditions for Remote Engine Start Function Will turn engine OFF, Educational Videos, Resources
Associated Products (4)Associated Documents - February 2, 2021•Document ID: 10188028Service Bulletin/Repair InstructionsLATCHES/LOCKS/LINKAGES; EXTERIOR LIGHTING; ENGINE AND ENGINE COOLING
- Mfr Comm. #:
- SA-013-21
- Date Added:
- March 3, 2021
- Manufacturer:
- MAZDA
SummaryIMPORTANT NOTE: Some 2020 Mazda3 vehicles may have incorrect infotainment software version 10042 installed. The incorrect software will cause MyMazda App Connected Vehicle enrollment errors. Go to SSPC1. Some customers may complain about any of the following: Infotainment Center Display does not provide the Authorization Code during the MyMazda App, Connected Vehicle enrollment (and Software Update Error message on 2020 Mazda3 only). Remote function(s) inoperative. Engine Start / Stop, Door Lock / Unlock, Lights ON / OFF
Associated Products (4)Associated Documents - February 2, 2021•Document ID: 10188027Service Bulletin/Repair InstructionsEQUIPMENT; EQUIPMENT ADAPTIVE/MOBILITY
- Mfr Comm. #:
- SA-014-21
- Date Added:
- March 3, 2021
- Manufacturer:
- MAZDA
SummarySome customers may complaint about an infotainment reboot. The infotainment system recovers if the Navigation SD card is removed (see attached video). Mazda is currently investigating this concern. Contact Hotine for the latest information.
Associated Products (4)Associated Documents - January 29, 2021•Document ID: 10186813Service Bulletin/Repair InstructionsEQUIPMENT ADAPTIVE/MOBILITY
- Mfr Comm. #:
- SA-011-21
- Date Added:
- February 6, 2021
- Manufacturer:
- MAZDA
SummarySection 6 of the Wireless Charging Pad instructions call for the use of an "ultrasonic cutter" to cut a rectangular hole for the harness to pass through and to serve as an access point to pop the wireless charger base out should service be required. Since an "ultrasonic cutter" is not readily available, follow the Repair Procedure to cut the rectangular hole.
Associated Products (2)Associated Documents - January 29, 2021•Document ID: 10186812Service Bulletin/Repair InstructionsEQUIPMENT ADAPTIVE/MOBILITY; LANE DEPARTURE
- Mfr Comm. #:
- SA-010-21
- Date Added:
- February 6, 2021
- Manufacturer:
- MAZDA
SummarySome vehicles may experience M-MDS (MDARS) showing the front radar dynamic aiming is incomplete. This may be caused by: Faulty front radar sensor software logic (MDARS showing the front radar dynamic aiming is incomplete although the procedure is completed). Front radar sensor out of alignment due to vehicle accident.
Associated Products (2)Associated Documents - January 26, 2021•Document ID: 10186701Service Bulletin/Repair InstructionsEQUIPMENT
- Mfr Comm. #:
- 07-001-21-3775
- Date Added:
- February 5, 2021
- Manufacturer:
- MAZDA
SummaryA musty/mildew type odor may come from the vents when the air conditioning (A/C) system is operating. It is most noticeable when the A/C is first turned ON. This odor is the result of mold growth in the A/C evaporator/cooling unit which is caused by condensation, dust, and pollen within the cooling unit. This condition is usually worse during high humidity conditions. âÂÂMazda Air Cooling Coil Coatingâ is available to encapsulate the mold to reduce odors. If the product is properly applied, it can effectively reduce the musty/mildew odor for up to three years.
Associated Products (7)Associated Documents - January 26, 2021•Document ID: 10186699Service Bulletin/Repair InstructionsSTEERING
- Mfr Comm. #:
- 02-003-21-3777
- Date Added:
- February 5, 2021
- Manufacturer:
- MAZDA
SummarySome customers may complain that the steering wheel is off center more than 3ð even when driving straight on a flat road.
Associated Products (7)Associated Documents - January 21, 2021•Document ID: 10186705Service Bulletin/Repair InstructionsSTRUCTURE
- Mfr Comm. #:
- 09-004-21-3772
- Date Added:
- February 5, 2021
- Manufacturer:
- MAZDA
SummarySome vehicles may experience stains appearing on the hood, roof and/or trunk of the vehicle. This concern is most likely to be found in a cold weather areas just after the RAPGARD is removed at PDI. This may be caused by moisture which has been trapped and condensed between the paint and the RAPGARD. These types of stains can be removed with a heat gun or an infrared drier.
Associated Products (7)Associated Documents