Ford Mustang Service Bulletins (2018)
198 manufacturer communications on file.
- March 21, 2018•Document ID: 10137069Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING; POWER TRAIN
- Mfr Comm. #:
- TSB18-2083
- Date Added:
- May 21, 2018
- Manufacturer:
- FORD
SummarySome 2018 Mustang vehicles equipped with a 5.0L engine and a manual transmission built on 25-Oct-2017 and through 15-Nov-2017 may exhibit an inability or difficulty to shift the vehicle into second gear. This may be due to a stack-up tolerance issue between the transmission and the shifter. Follow the Service Procedure steps to correct the condition.
Associated Products (1)Associated Documents - February 21, 2018•Document ID: 10136611Service Bulletin/Repair InstructionsEQUIPMENT:ELECTRICAL
- Mfr Comm. #:
- SSM 47100
- Date Added:
- May 14, 2018
- Manufacturer:
- FORD
SummarySome 2016-2018 Ford and Lincoln Vehicle equipped with SYNC 3 and connected to an iPhone recently upgraded to iOS 11.2.5 may exhibit a concern where USB Audio playback and App Link applications will not function properly. This may also include, under certain conditions, no Bluetooth Streaming. Apple is aware of the issue and is working on a resolution with a future iOS release. No repairs should be performed at this time. To check the iOS software level on an Apple iOS device, select Settings > General > About on the device. Monitor OASIS for updates. Customers can also check Apple Support or connect to iTunes for the latest available iOS release for their phone.
Associated Products (45)2018 Ford Explorer2018 Ford F-1502018 Ford F-6502018 Ford F-7502018 Ford Flex2018 Ford Focus2018 Ford Fusion2018 Ford Mustang2018 Ford Taurus2018 Ford Transit2018 Lincoln Continental2018 Lincoln MKC2018 Lincoln MKT2018 Lincoln MKX2018 Lincoln MKZ2017 Ford Explorer2017 Ford F-1502017 Ford F-4502017 Ford F-5502017 Ford F-650+ 25 moreAssociated Documents - February 21, 2018•Document ID: 10136610Service Bulletin/Repair InstructionsFUEL SYSTEM, OTHER:STORAGE:TANK ASSEMBLY:PRESSURE RELIEF DEVICES
- Mfr Comm. #:
- SSM 47099
- Date Added:
- May 14, 2018
- Manufacturer:
- FORD
SummarySome 2018 Mustang equipped with 5.0L engines and F-150 equipped with 2.7L, 3.3L, 3.5L and 5.0L engines may exhibit illuminated Malfunction Indicator Light(MIL) with Diagnostic Trouble Code P0181(Fuel Temperature Sensor A Circuit Range/Performance) stored in Powertrain Control Module(PCM) memory. DTC may set if Key On Engine Running(KOER) diagnostic routine is performed with cold fuel(Below 50F/10C) in vehicle fuel tank. Refer to the Powertrain Control/Emissions Diagnosis(PC/ED) Pin Point Test DD for normal diagnostics. If unable to determine root cause, do not replace fuel pressure/temperature sensor or Powertrain Control Module(PCM). Engineering is investigating, monitor OASIS for updates.
Associated Products (2)Associated Documents - February 19, 2018•Document ID: 10136606Service Bulletin/Repair InstructionsPOWER TRAIN:AUTOMATIC TRANSMISSION
- Mfr Comm. #:
- SSM 47093
- Date Added:
- May 14, 2018
- Manufacturer:
- FORD
Summary2017-2018 F-150/Raptor and 2018 Expedition/Navigator/Mustang vehicles equipped with a 10R80 automatic transmission require a new automatic transmission fluid, MERCONù Ultra Low Viscosity (ULV). It is important to positively identify the transmission and service with the correct fluid. Use only Motorcraft MERCONù ULV Automatic Transmission Fluid XT-12-QULV (WSS-M2C949-A) or equivalent when servicing a 10R80 automatic transmission. Using improper transmission fluid may result in internal transmission damage. For any further questions regarding the 10R80 transmission or fluid specification for 2017-2018 F-150 or 2018 Expedition/Mustang/Navigator Refer to WSM Section 307-01 - Specifications.
Associated Products (3)Associated Documents - February 15, 2018•Document ID: 10136598Service Bulletin/Repair InstructionsSEAT BELTS:FRONT:RETRACTOR
- Mfr Comm. #:
- SSM 47082
- Date Added:
- May 14, 2018
- Manufacturer:
- FORD
SummarySome 2018 Mustang convertibles may exhibit a slow/no retraction of the driver or passenger front seat belt shoulder harness. This may be due to increased resistance of the belt going through the shoulder web guide on the seat back. To verify, remove the shoulder belt from the web guide on the seat and identify if the seat belt will now retract normally. If a slow/no retraction still exists, Refer to Workshop Manual (WSM), Section 501-20 for further diagnosis. If normal operation resumes, do not attempt any repairs at this time. Engineering is investigating, monitor OASIS for updates.
Associated Products (1)Associated Documents - February 14, 2018•Document ID: 10136597Service Bulletin/Repair InstructionsEQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC.
- Mfr Comm. #:
- SSM 47080
- Date Added:
- May 14, 2018
- Manufacturer:
- FORD
Summary2010-2018 various vehicles equipped with SYNC or SYNC 3 may not function when attempting to find or use the Spotify app via AppLink. As of an update released on 1/15/2018 Spotify will no longer be supporting their AppLink integration. No repair attempts should be attempted to correct this concern.
Associated Products (199)2018 Ford Edge2018 Ford Escape2018 Ford Explorer2018 Ford F-1502018 Ford F-2502018 Ford F-3502018 Ford Fiesta2018 Ford Flex2018 Ford Focus2018 Ford Fusion2018 Ford Mustang2018 Ford Taurus2018 Ford Transit2018 Lincoln Continental2018 Lincoln MKC2018 Lincoln MKT2018 Lincoln MKX2018 Lincoln MKZ2017 Ford C-Max2017 Ford Edge+ 179 moreAssociated Documents - February 9, 2018•Document ID: 10136592Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:12V/24V/48V BATTERY
- Mfr Comm. #:
- SSM 47070
- Date Added:
- May 14, 2018
- Manufacturer:
- FORD
SummaryWhen connecting the Vehicle Communication Module (VCM) and Integrated Diagnostic System (IDS) or Ford Diagnosis and Repair System (FDRS) to the DLC located on the driver side under the steering column at the GWM, make sure that the ignition is off before connecting the VCM. If the ignition is on or the engine is running during the connection, it can result in various warning lights being illuminated with diagnostic trouble codes (DTCs), no start or no crank conditions or the IPC inoperative. For Lincoln vehicles, this information is now listed in the Technical Inspection and Post Road Test Sections of ePDI on the PTS website. If a vehicle displays these issues, disconnect the equipment from the DLC and disconnect the vehicle battery. Wait 10 minutes and reinstall with the ignition off. Clear any DTCs present and retest.
Associated Products (39)2018 Ford Ecosport2018 Ford Edge2018 Ford Explorer2018 Ford F-1502018 Ford Fusion2018 Ford Mustang2018 Lincoln Continental2018 Lincoln MKC2018 Lincoln MKX2018 Lincoln MKZ2017 Ford Edge2017 Ford Explorer2017 Ford F-1502017 Ford F-4502017 Ford F-5502017 Ford Fusion2017 Ford Mustang2017 Lincoln Continental2017 Lincoln MKC2017 Lincoln MKX+ 19 moreAssociated Documents - February 7, 2018•Document ID: 10136574Service Bulletin/Repair InstructionsSTRUCTURE:BODY:ROOF AND PILLARS; EQUIPMENT ADAPTIVE/MOBILITY
- Mfr Comm. #:
- TSB18-2036
- Date Added:
- May 14, 2018
- Manufacturer:
- FORD
SummarySome 2015-2018 Mustang vehicles with a convertible top may exhibit a condition where the top sags on one or both sides near the rear glass due to broken tension rod clips. Follow the Service Procedure steps to correct the condition.
Associated Products (4)Associated Documents - February 5, 2018•Document ID: 10136585Service Bulletin/Repair InstructionsPOWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM)
- Mfr Comm. #:
- SSM 47057
- Date Added:
- May 14, 2018
- Manufacturer:
- FORD
SummarySome 2018 Mustang vehicles equipped with a 5.0L engine and F-150 vehicles equipped with a 3.3L engine may exhibit an illuminated MIL with DTC P0111 stored in powertrain control module (PCM) memory. Refer to the Powertrain Control/Emissions Diagnosis (PC/ED) Manual for normal diagnostics. If unable to determine root cause, do not attempt any repairs at this time. Engineering is investigating, monitor OASIS for updates.
Associated Products (2)Associated Documents - January 11, 2018•Document ID: 10140324Service Bulletin/Repair InstructionsEQUIPMENT:APPLIANCE:AIR CONDITIONER
- Mfr Comm. #:
- SSM 47012
- Date Added:
- June 11, 2018
- Manufacturer:
- FORD
SummarySome 2015-2018 F-150, Mustang and Transit vehicles built on or before 01-Dec-2017 may have a concern of no airflow from the climate control vents. This may be caused by a seized or sticking A/C clutch. This can be repaired by replacing only the A/C clutch (19D786/19D784). The compressor assembly (19703) may not be required. Refer to Workshop Manual, Section 412-00 for A/C clutch removal. It may be necessary to lightly tap around the stuck area of the clutch with a rubber mallet to free it from the pulley for removal. Refer to applicable labor operations from Section 11 of the SLTS maunual when replacing the A/C clutch.
Associated Products (12)Associated Documents - January 11, 2018•Document ID: 10138525Service Bulletin/Repair InstructionsEQUIPMENT:APPLIANCE:AIR CONDITIONER
- Mfr Comm. #:
- SSM 47012
- Date Added:
- May 29, 2018
- Manufacturer:
- FORD
SummarySome 2015-2018 F-150, Mustang and Transit vehicles built on or before 01-Dec-2017 may have a concern of no airflow from the climate control vents. This may be caused by a seized or sticking A/C clutch. This can be repaired by replacing only the A/C clutch (19D786/19D784). The compressor assembly (19703) may not be required. Refer to Workshop Manual, Section 412-00 for A/C clutch removal. It may be necessary to lightly tap around the stuck area of the clutch with a rubber mallet to free it from the pulley for removal. Refer to applicable labor operations from Section 11 of the SLTS maunual when replacing the A/C clutch.
Associated Products (12)Associated Documents - January 10, 2018•Document ID: 10140322Service Bulletin/Repair InstructionsTIRES
- Mfr Comm. #:
- SSM 47008
- Date Added:
- June 11, 2018
- Manufacturer:
- FORD
SummarySome 2018 Mustang vehicles equipped with the digital IPC may exhibit a "Service Tire Mobility Kit" message being displayed in the IPC. Press the OK button on the steering wheel to clear this message from the IPC. To prevent the message from returning on the next key cycle, press the settings button on the steering wheel, and in the menu, choose advanced settings> vehicle> tire mobility kit> 4 years. This should be performed even if the 4 years selection in this menu is already selected. Do not replace the tire mobility kit. Do not attempt any repairs at this time. Engineering is investigating, monitor OASIS for updates.
Associated Products (1)Associated Documents - January 10, 2018•Document ID: 10138523Service Bulletin/Repair InstructionsTIRES
- Mfr Comm. #:
- SSM 47008
- Date Added:
- May 29, 2018
- Manufacturer:
- FORD
SummarySome 2018 Mustang vehicles equipped with the digital IPC may exhibit a "Service Tire Mobility Kit" message being displayed in the IPC. Press the OK button on the steering wheel to clear this message from the IPC. To prevent the message from returning on the next key cycle, press the settings button on the steering wheel, and in the menu, choose advanced settings> vehicle> tire mobility kit> 4 years. This should be performed even if the 4 years selection in this menu is already selected. Do not replace the tire mobility kit. Do not attempt any repairs at this time. Engineering is investigating, monitor OASIS for updates.
Associated Products (1)Associated Documents - January 5, 2018•Document ID: 10140312Service Bulletin/Repair InstructionsSTEERING; STEERING:HYDRAULIC POWER ASSIST SYSTEM
- Mfr Comm. #:
- SSM 46997
- Date Added:
- June 11, 2018
- Manufacturer:
- FORD
SummarySome 2018 Mustang vehicles may exhibit a customer complaint of lack of on center feel or overall power steering feel performance. A new power steering control module (PSCM) calibration has been released. Reprogram the PSCM to the latest calibration using Integrated Diagnostic System (IDS) release 108.02 or higher. Make sure you are connected to the internet when entering module programming to obtain the latest updates. Calibration files may also be obtained at www.motorcraftservice.com. For claiming, use causal part 3504 and applicable labor operations in section 10 of the service labor time standards (SLTS) manual.
Associated Products (1)Associated Documents - January 5, 2018•Document ID: 10138513Service Bulletin/Repair InstructionsSTEERING
- Mfr Comm. #:
- SSM 46997
- Date Added:
- May 29, 2018
- Manufacturer:
- FORD
SummarySome 2018 Mustang vehicles may exhibit a customer complaint of lack of on center feel or overall power steering feel performance. A new power steering control module (PSCM) calibration has been released. Reprogram the PSCM to the latest calibration using Integrated Diagnostic System (IDS) release 108.02 or higher. Make sure you are connected to the internet when entering module programming to obtain the latest updates. Calibration files may also be obtained at www.motorcraftservice.com. For claiming, use causal part 3504 and applicable labor operations in section 10 of the service labor time standards (SLTS) manual.
Associated Products (1)Associated Documents - November 22, 2017•Document ID: 10127417Service Bulletin/Repair InstructionsEQUIPMENT:ELECTRICAL
- Mfr Comm. #:
- SSM 46930
- Date Added:
- January 29, 2018
- Manufacturer:
- LINCOLN
SummarySome 2016-2018 Ford or Lincoln vehicles equipped with SYNC 3 may exhibit a blank screen or other various SYNC symptoms only when the vehicle is in transport mode. This is due to the power saving features enabled while in transport mode and is beneficial for battery life to keep the vehicle in transport mode until the vehicle is prepped for sale. To prevent a SYNC system lockup during transport mode deactivation, follow the Workshop Manual (WSM) procedure allowing time for the SYNC system to complete all tasks such as fully booting up or powering down and shutting off before moving to the next step of the procedure. If the vehicle exhibits a blank screen or SYNC symptoms after transport mode deactivation, refer to WSM, Section 415-00 for normal diagnosis. The SYNC version can be confirmed via OASIS.
Associated Products (51)2018 Ford Edge2018 Ford Escape2018 Ford Explorer2018 Ford F-1502018 Ford Flex2018 Ford Focus2018 Ford Fusion2018 Ford Mustang2018 Ford Taurus2018 Ford Transit2018 Lincoln Continental2018 Lincoln MKC2018 Lincoln MKT2018 Lincoln MKX2018 Lincoln MKZ2017 Ford C-Max2017 Ford Edge2017 Ford Escape2017 Ford Expedition2017 Ford Explorer+ 31 moreAssociated Documents - November 2, 2017•Document ID: 10127405Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM)
- Mfr Comm. #:
- SSM 46900
- Date Added:
- January 29, 2018
- Manufacturer:
- FORD
SummarySome vehicles may exhibit a no start condition with an illuminated malfunction indicator lamp (MIL) and a DTC P161A after PCM replacement. This may be due to the parameter reset procedure not being properly completed. To clear this DTC, use the Ford Integrated Diagnostic System (IDS) service tool or Ford J2534 Diagnostic Software, select - Toolbox - Body - Security - PATS Functions - Parameter Reset. Follow the on-screen instructions to complete the procedure. This procedure will transfer the existing Key ID information between the modules without the need of having 2 programmed PATS keys present. There is no need to program keys when the PCM is going to be replaced. Additional information can be found in the Workshop Manual (WSM), Section 419-01. Missing or lost keys are not warrantable.
Associated Products (202)2018 Ford Edge2018 Ford Escape2018 Ford Explorer2018 Ford F-1502018 Ford Fiesta2018 Ford Flex2018 Ford Focus2018 Ford Fusion2018 Ford Mustang2018 Ford Transit2018 Lincoln Continental2018 Lincoln MKC2018 Lincoln MKT2018 Lincoln MKZ2017 Ford C-Max2017 Ford E-2502017 Ford E-3502017 Ford E-4502017 Ford Edge2017 Ford Escape+ 182 moreAssociated Documents - October 6, 2017•Document ID: 10125078Service Bulletin/Repair InstructionsEQUIPMENT:ELECTRICAL:NAVIGATIONAL SYSTEM(GLOBAL POSITIONING SYSTEM)
- Mfr Comm. #:
- SSM 46860
- Date Added:
- December 14, 2017
- Manufacturer:
- LINCOLN
SummarySome 2016-2018 Ford or Lincoln vehicles equipped with SYNC 3 may exhibit a blank screen or other various SYNC symptoms only when the vehicle is in transport mode. This is due to the power saving features enabled while in transport mode and is beneficial for battery life to keep the vehicle in transport mode until the vehicle is prepped for sale. To prevent a SYNC system lockup during transport mode deactivation, follow the Workshop Manual (WSM) procedure allowing time for the SYNC system to complete all tasks such as fully booting up or powering down and shutting off before moving to the next step of the procedure. If the vehicle exhibits a blank screen or SYNC symptoms after transport mode deactivation, refer to WSM, Section 415-00 for normal diagnosis. The SYNC version can be confirmed via OASIS.
Associated Products (57)2018 Ford Edge2018 Ford Escape2018 Ford Explorer2018 Ford F-1502018 Ford Flex2018 Ford Focus2018 Ford Fusion2018 Ford Mustang2018 Ford Taurus2018 Ford Transit2018 Lincoln Continental2018 Lincoln MKC2018 Lincoln MKT2018 Lincoln MKX2018 Lincoln MKZ2017 Ford C-Max2017 Ford Edge2017 Ford Escape2017 Ford Expedition2017 Ford Explorer+ 37 moreAssociated Documents