Ford F-450 Service Bulletins (2016)

128 manufacturer communications on file.

• January 6, 2021•Document ID: 10186567

  Service Bulletin/Repair Instructions
  ENGINE AND ENGINE COOLING

  Mfr Comm. #:

  SSM 49430

  Date Added:

  February 4, 2021

  Manufacturer:

  FORD

  Summary

  2011-2021 F-Super Duty and 2016-2021 F-650/F-750 vehicles equipped with a 6.7L engine may exhibit a high/elevated idle condition. During prolonged idle time, vehicles may experience this high/elevated idle to reduce buildup of unburned hydrocarbons from the SCR system. The powertrain control module (PCM) estimates hydrocarbon levels in the SCR and may increase idle speed to remove them. Idle speed will be increased to 1000 revolutions per minute (rpms) for ambient temperatures near 26C (80F) and may increase to as high as 1200 rpms at -40 C (-40F). These elevated idle periods can last from 20-40 minutes, depending on ambient temperatures. During power take off (PTO) use and already using idle set point control, the elevated speed is disabled. It is required that the operator monitor the vehicle and adhere to the Exhaust Filter warning messages.

  Associated Products (52)

  2021 Ford F-2502021 Ford F-3502021 Ford F-6502021 Ford F-7502020 Ford F-2502020 Ford F-3502020 Ford F-4502020 Ford F-5502019 Ford F-2502019 Ford F-3502019 Ford F-4502019 Ford F-5502019 Ford F-6502019 Ford F-7502018 Ford F-2502018 Ford F-3502018 Ford F-4502018 Ford F-5502018 Ford F-6502018 Ford F-750+ 32 more
  Associated Documents

  • DownloadMC-10186567-0001.pdf↗
• October 27, 2020•Document ID: 10181930

  Service Bulletin/Repair Instructions
  ELECTRICAL SYSTEM:SOFTWARE; POWER TRAIN

  Mfr Comm. #:

  TSB 20-2369

  Date Added:

  November 5, 2020

  Manufacturer:

  FORD

  Summary

  Some 2015-2016 F-Super Duty pickup vehicles equipped with a 6.7L diesel engine may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble code (DTC) P24A0 stored in the powertrain control module (PCM). This may be due to various strategies within the PCM software. To correct the condition, follow the service procedure to reprogram the PCM.

  Associated Products (12)

  2016 Ford F-2502016 Ford F-3502016 Ford F-4502016 Ford F-5502016 Ford F-6502016 Ford F-7502015 Ford F-2502015 Ford F-3502015 Ford F-4502015 Ford F-5502015 Ford F-6502015 Ford F-750
  Associated Documents

  • DownloadMC-10181930-0001.pdf↗
• August 11, 2020•Document ID: 10179306

  Service Bulletin/Repair Instructions
  POWER TRAIN

  Mfr Comm. #:

  SSM 49061

  Date Added:

  September 4, 2020

  Manufacturer:

  FORD

  Summary

  Some 2015-2016 F-Super Duty vehicles equipped with 6.7L Diesel engines may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble code (DTC) P24A0 stored in the powertrain control module (PCM). This condition does not create drivability concerns and has no effect on vehicle operation or long-term durability. If the pinpoint test RC leads to an inconclusive direction, clear the DTCs with the appropriate Ford diagnostic scan tool and schedule a follow-up appointment for service in early November. Inform the customer that engineering is working to implement a solution for this condition and advise the customer that they can continue to drive the vehicle. Once the solution becomes available, contact the customer and confirm the service appointment is going forward. Monitor OASIS for updates.

  Associated Products (8)

  2016 Ford F-2502016 Ford F-3502016 Ford F-4502016 Ford F-5502015 Ford F-2502015 Ford F-3502015 Ford F-4502015 Ford F-550
  Associated Documents

  • DownloadMC-10179306-0001.pdf↗
• August 11, 2020•Document ID: 10179325

  Service Bulletin/Repair Instructions
  FUEL SYSTEM, DIESEL; ENGINE AND ENGINE COOLING; ELECTRICAL SYSTEM

  Mfr Comm. #:

  SSM 49065

  Date Added:

  September 4, 2020

  Manufacturer:

  FORD

  Summary

  Some 2011-2020 F-Super Duty, 2015-2019 Transit, 2016-2021 F-650/F-750 and 2018-2020 F-150 vehicles equipped with a 6.7L, 3.2L or 3.0L engine may exhibit an illuminated MIL with diagnostic trouble codes (DTCs) P207F, P20EE, P229F, P2201 and/or P24AE. This may be a result of using aftermarket cleaning liquids or tools for the exhaust gas recirculation (EGR) cooler or intake. Ford does not recommend the cleaning of diesel intakes or EGR coolers using any aftermarket tool that injects a cleaning foam or liquid substance into the EGR cooler or intake. Using these types of fluids can result in sodium poisoning of the NOx and particulate matter (PM) sensors resulting in degraded operation and permanent damage to the after treatment system. Use of these cleaning tools may void the emissions warranty of the hot end after treatment exhaust system and the attached emissions sensors.

  Associated Products (58)

  2021 Ford F-6502021 Ford F-7502020 Ford F-1502020 Ford F-2502020 Ford F-3502020 Ford F-4502020 Ford F-5502019 Ford F-1502019 Ford F-2502019 Ford F-3502019 Ford F-4502019 Ford F-5502019 Ford F-6502019 Ford F-7502019 Ford Transit2018 Ford F-1502018 Ford F-2502018 Ford F-3502018 Ford F-4502018 Ford F-550+ 38 more
  Associated Documents

  • DownloadMC-10179325-0001.pdf↗
• August 6, 2020•Document ID: 10179117

  Service Bulletin/Repair Instructions
  ELECTRICAL SYSTEM:SOFTWARE

  Mfr Comm. #:

  TSB 20-2255

  Date Added:

  September 2, 2020

  Manufacturer:

  FORD

  Summary

  Some 2016 MKS, 2016-2017 Navigator, 2016-2018 F150/Focus/CMAX/Edge/Fiesta/MKX/ Transit Connect/Mustang, 2017-2018 Continental/Fusion/MKZ, 2017-2019 Explorer, 2016-2019 Escape/MKC/Flex/MKT/Taurus/Transit/Expedition/F-Super Duty, and 2018-2019 EcoSport vehicles equipped with SYNC 3 may experience various SYNC performance related concerns. To correct the condition, follow the Service Procedure.

  Associated Products (83)

  2020 Ford Ecosport2019 Ford Ecosport2019 Ford Escape2019 Ford Expedition2019 Ford Explorer2019 Ford F-2502019 Ford F-3502019 Ford F-4502019 Ford F-5502019 Ford Flex2019 Ford Taurus2019 Ford Transit2019 Lincoln MKC2019 Lincoln MKT2018 Ford C-Max2018 Ford Ecosport2018 Ford Edge2018 Ford Escape2018 Ford Expedition2018 Ford Explorer+ 63 more
  Associated Documents

  • DownloadMC-10179117-0001.pdf↗
• July 16, 2020•Document ID: 10177868

  Service Bulletin/Repair Instructions
  STRUCTURE

  Mfr Comm. #:

  TSB 20-2235

  Date Added:

  August 6, 2020

  Manufacturer:

  FORD

  Summary

  Some 2015-2020 F-150, 2017-2020 F-Super Duty vehicles may exhibit one or more noisy doors when opening and closing. This may be due to dirt and debris on the door check arm(s). To correct this condition, follow the Service Procedure to clean and neutralize the affected door check arms.

  Associated Products (30)

  2020 Ford F-1502020 Ford F-2502020 Ford F-3502020 Ford F-4502020 Ford F-5502019 Ford F-1502019 Ford F-2502019 Ford F-3502019 Ford F-4502019 Ford F-5502018 Ford F-1502018 Ford F-2502018 Ford F-3502018 Ford F-4502018 Ford F-5502017 Ford F-1502017 Ford F-2502017 Ford F-3502017 Ford F-4502017 Ford F-550+ 10 more
  Associated Documents

  • DownloadMC-10177868-0001.pdf↗
• June 17, 2020•Document ID: 10177042

  Service Bulletin/Repair Instructions
  ELECTRICAL SYSTEM; EQUIPMENT

  Mfr Comm. #:

  SSM 48908

  Date Added:

  July 7, 2020

  Manufacturer:

  FORD

  Summary

  Some 2016-2020 Ford and Lincoln vehicles equipped with a SYNC 3 Touchscreen may experience the volume control unresponsive from the Front Control Interface Module (FCIM) and steering volume controls when using Apple Car Play. When the Apple device is removed, volume control is restored. This is due to a concern with the Waze Navigation App software and Apple iOS version. To correct the condition, update the Waze App software and iOS to the latest version available and reboot the customer's Apple device. Perform an ignition cycle and reconnect the Apple device via USB. Open Apple Car Play and confirm volume control is restored. Installing/Updating third party software/applications is not warrantable.

  Associated Products (121)

  2020 Ford Ecosport2020 Ford Edge2020 Ford Escape2020 Ford Expedition2020 Ford Explorer2020 Ford F-1502020 Ford F-2502020 Ford F-3502020 Ford F-4502020 Ford F-5502020 Ford Fusion2020 Ford Mustang2020 Ford Ranger2020 Ford Transit2020 Ford Transit Connect2020 Lincoln Aviator2020 Lincoln Continental2020 Lincoln Corsair2020 Lincoln MKX2020 Lincoln MKZ+ 101 more
  Associated Documents

  • DownloadMC-10177042-0001.pdf↗
• March 9, 2020•Document ID: 10172972

  Service Bulletin/Repair Instructions
  UNKNOWN OR OTHER; ELECTRICAL SYSTEM

  Mfr Comm. #:

  SSM 48619

  Date Added:

  April 2, 2020

  Manufacturer:

  FORD

  Summary

  SSM 48619 - Various Vehicles - Perimeter Alarm Armed And Original Vehicle Keys Cannot Be Accessed to Enter Vehicle - CAN Protection Strategy Some 2013-2016 Model Year Vehicles may exhibit a concern in which the Perimeter Alarm is active and the original keys cannot be accessed to disable the perimeter alarm. This concern would most often occur when a customer loses keys and the dealership is attempting to program new keys to the vehicle. The Workshop Manual (WSM), Section 419-01A Perimeter Anti-Theft Alarm - System Operation and Component Description has been updated to inform of the Controller Area Network (CAN) Protection Strategy. Follow the procedure outlined to prevent replacement of the Body Control Module (BCM) on CAN Protection Strategy equipped vehicles when original keys are lost and perimeter alarm is active. Refer to the WSM for further detail on the CAN Protection Strategy. Lost keys and replacement of BCM for lost keys is non-warrantable.

  Associated Products (151)

  2020 Ford Ecosport2020 Ford Edge2020 Ford F-1502020 Ford F-2502020 Ford F-3502020 Ford F-4502020 Ford F-5502020 Ford Fusion2020 Ford Mustang2020 Ford Transit2020 Ford Transit Connect2020 Lincoln MKX2020 Lincoln MKZ2019 Ford Ecosport2019 Ford Edge2019 Ford Escape2019 Ford Explorer2019 Ford F-1502019 Ford F-2502019 Ford F-350+ 131 more
  Associated Documents

  • DownloadMC-10172972-0001.pdf↗
• January 29, 2020•Document ID: 10170992

  Service Bulletin/Repair Instructions
  SUSPENSION

  Mfr Comm. #:

  SSM 48494

  Date Added:

  February 4, 2020

  Manufacturer:

  FORD

  Summary

  Some 2005-2020 F-Super Duty 4x4 vehicles operated in extreme dust, mud or tar sand conditions may exhibit accelerated 4x4 vacuum hub seal and or wheel bearing wear as a result of harsh operating conditions. A knuckle seal shield kit is now available for customer purchase. The kit is designed for severe duty and is non warrantable. The knuckle seal shield kit GC3Z-54024A38-A includes an installation instruction sheet

  Associated Products (64)

  2020 Ford F-2502020 Ford F-3502020 Ford F-4502020 Ford F-5502019 Ford F-2502019 Ford F-3502019 Ford F-4502019 Ford F-5502018 Ford F-2502018 Ford F-3502018 Ford F-4502018 Ford F-5502017 Ford F-2502017 Ford F-3502017 Ford F-4502017 Ford F-5502016 Ford F-2502016 Ford F-3502016 Ford F-4502016 Ford F-550+ 44 more
  Associated Documents

  • DownloadMC-10170992-0001.pdf↗
• August 9, 2019•Document ID: 10164508

  Service Bulletin/Repair Instructions
  VISIBILITY:GLASS, SIDE/REAR; VISIBILITY

  Mfr Comm. #:

  SSM 48130

  Date Added:

  September 6, 2019

  Manufacturer:

  FORD

  Summary

  Some 2010-2020 vehicles may exhibit distorted glass with a subtle orange peel pattern or streaking etched into the surface. This is caused by hydrofluoric acid which is used in some car wash solutions as a cleaning agent. Hydrofluoric acid can attack the glass and cause visual distortion and/or discoloration on the outer surface which cannot be removed by further cleaning. If this type of distortion is found, inspect the area of the glass that is covered by the cowl and/or molding. The portion of glass that is covered by the cowl or molding will not be affected by the acid. Hydrofluoric acid damage is not a defect in material or workmanship and is not a warrantable condition.

  Associated Products (223)

  2020 Ford Expedition2020 Ford Explorer2020 Ford F-1502020 Ford F-4502020 Ford F-5502019 Ford E-3502019 Ford Ecosport2019 Ford Edge2019 Ford Escape2019 Ford Explorer2019 Ford F-1502019 Ford F-2502019 Ford F-3502019 Ford F-4502019 Ford F-5502019 Ford Fiesta2019 Ford Flex2019 Ford Fusion2019 Ford Mustang2019 Ford Taurus+ 203 more
  Associated Documents

  • DownloadMC-10164508-0001.pdf↗
• August 7, 2019•Document ID: 10164497

  Service Bulletin/Repair Instructions
  ELECTRICAL SYSTEM

  Mfr Comm. #:

  SSM 48123

  Date Added:

  September 6, 2019

  Manufacturer:

  FORD

  Summary

  For Ford and Lincoln vehicles that require positive or negative battery terminal replacement, it is not necessary to replace the complete battery cable harness (14300 and 14301) for this concern. Positive battery cable clamp BT4Z-14450-AA and negative battery cable clamp BT4Z-14450-BA are available for this type of repair. Do not cut or shorten the battery cable, instead carefully remove the affected battery cable clamp and clean the cable end as necessary to preserve wire length. Some rework may be necessary for some vehicle environments. Bend the new positive battery cable clamp as needed and crimp it to the existing battery cable. Make sure to use heat shrink tubing over the battery cable to battery cable clamp connection. Obtain the heat shrink tube locally.

  Associated Products (196)

  2019 Ford E-3502019 Ford Edge2019 Ford Escape2019 Ford Explorer2019 Ford F-1502019 Ford F-2502019 Ford F-3502019 Ford F-4502019 Ford F-5502019 Ford F-6502019 Ford F-7502019 Ford Flex2019 Ford Fusion2019 Ford Mustang2019 Ford Taurus2019 Ford Transit Connect2019 Lincoln Continental2019 Lincoln MKC2019 Lincoln MKT2019 Lincoln MKZ+ 176 more
  Associated Documents

  • DownloadMC-10164497-0001.pdf↗
• June 24, 2019•Document ID: 10162087

  Service Bulletin/Repair Instructions
  ELECTRICAL SYSTEM

  Mfr Comm. #:

  SSM 48053

  Date Added:

  July 8, 2019

  Manufacturer:

  FORD

  Summary

  Some 2016-2019 Ford and Lincoln vehicles equipped with SYNC 3 not at the latest software level may exhibit Various Performance Related concerns such as Display Operation, Navigation, Voice Recognition, Phone Pairing, Applink, Travel Link, Slow System Response, etc. Check for SYNC software update under the OASIS Tab SYNC selection. If an update is available refer to WSM,Section 415-00 and update the APIM software. After Installation, complete pop-up appears, remove USB flash drive and install into IDS tool to update Ford database. Perform a complete ignition cycle by turning the key off for 5 minutes which is critical for a successful installation. If no updates are available or a blue or black screen is present after an update refer to WSM, Section 415-00 for diagnosis or SYNC 3 intermittent blank screen GSB for tips. For claiming, use causal part 14G371 and applicable labor operations in section 10 of the SLTS manual. Section

  Associated Products (80)

  2019 Ford Ecosport2019 Ford Escape2019 Ford Explorer2019 Ford F-2502019 Ford F-3502019 Ford F-4502019 Ford F-5502019 Ford Flex2019 Ford Taurus2019 Ford Transit2019 Lincoln MKC2019 Lincoln MKT2018 Ford C-Max2018 Ford Ecosport2018 Ford Edge2018 Ford Escape2018 Ford Explorer2018 Ford F-1502018 Ford F-2502018 Ford F-350+ 60 more
  Associated Documents

  • DownloadMC-10162087-0001.pdf↗
• June 17, 2019•Document ID: 10162082

  Service Bulletin/Repair Instructions
  ENGINE AND ENGINE COOLING

  Mfr Comm. #:

  SSM 48044

  Date Added:

  July 8, 2019

  Manufacturer:

  FORD

  Summary

  Some 2011-2019 F-Super Duty vehicles equipped with a 6.7L engine may come in for scheduled maintenance on the engine mounted fuel filter. When reconnecting a fuel line quick connect fitting back onto the engine mounted fuel filter housing, push the connector all the way onto the fuel filter connection port. For some vehicles, you may need to depress a retainer clip to lock the quick connect port into place. Once the fitting is latched fully onto the connection port, pull straight backward on the fuel line to verify it is fully latched onto the connection port. Do not bend the fuel line connection when pulling to verify it is connected. Refer to Workshop Manual sections 310-00 for details on quick connect fittings.

  Associated Products (36)

  2019 Ford F-2502019 Ford F-3502019 Ford F-4502019 Ford F-5502018 Ford F-2502018 Ford F-3502018 Ford F-4502018 Ford F-5502017 Ford F-2502017 Ford F-3502017 Ford F-4502017 Ford F-5502016 Ford F-2502016 Ford F-3502016 Ford F-4502016 Ford F-5502015 Ford F-2502015 Ford F-3502015 Ford F-4502015 Ford F-550+ 16 more
  Associated Documents

  • DownloadMC-10162082-0001.pdf↗
• May 23, 2019•Document ID: 10160939

  Service Bulletin/Repair Instructions
  ENGINE AND ENGINE COOLING; ENGINE AND ENGINE COOLING:COOLING SYSTEM:FAN

  Mfr Comm. #:

  SSM 47999

  Date Added:

  June 7, 2019

  Manufacturer:

  FORD

  Summary

  Some 2016-2019 F-Super Duty and 2016-2019 F650-750 vehicles equipped with 6.7L engine may exhibit a concern where the engine cooling fan stays on at all times or is inoperative. Diagnostic trouble codes (DTCs) P0480, P0494, P0495, P0529, P0691, P0692, P0693 and/or P0694 may be stored in the powertrain control module (PCM). To address these vehicle symptoms, use the updated online version of pinpoint test AH in the powertrain control/emission diagnostic (PC/ED) tab on the PTS website. The pinpoint test has been updated to aid in preventing unnecessary fan clutch replacement.

  Associated Products (24)

  2019 Ford F-2502019 Ford F-3502019 Ford F-4502019 Ford F-5502019 Ford F-6502019 Ford F-7502018 Ford F-2502018 Ford F-3502018 Ford F-4502018 Ford F-5502018 Ford F-6502018 Ford F-7502017 Ford F-2502017 Ford F-3502017 Ford F-4502017 Ford F-5502017 Ford F-6502017 Ford F-7502016 Ford F-2502016 Ford F-350+ 4 more
  Associated Documents

  • DownloadMC-10160939-0001.pdf↗
• May 14, 2019•Document ID: 10160885

  Service Bulletin/Repair Instructions
  SUSPENSION; SUSPENSION:FRONT:WHEEL BEARING

  Mfr Comm. #:

  SSM 47979

  Date Added:

  June 6, 2019

  Manufacturer:

  FORD

  Summary

  Some 2005-2019 F-Super Duty 4x4 vehicles operated in extreme dust, mud or tar sand conditions may exhibit accelerated 4x4 vacuum hub seal and or wheel bearing wear as a result of harsh operating conditions. A knuckle seal shield kit is now available for customer purchase. The kit is designed for severe duty and is non warrantable. The knuckle seal shield kit GC3Z-54024A38-A includes an installation instruction sheet

  Associated Products (60)

  2019 Ford F-2502019 Ford F-3502019 Ford F-4502019 Ford F-5502018 Ford F-2502018 Ford F-3502018 Ford F-4502018 Ford F-5502017 Ford F-2502017 Ford F-3502017 Ford F-4502017 Ford F-5502016 Ford F-2502016 Ford F-3502016 Ford F-4502016 Ford F-5502015 Ford F-2502015 Ford F-3502015 Ford F-4502015 Ford F-550+ 40 more
  Associated Documents

  • DownloadMC-10160885-0001.pdf↗
• May 10, 2019•Document ID: 10160931

  Service Bulletin/Repair Instructions
  POWER TRAIN

  Mfr Comm. #:

  SSM 47976

  Date Added:

  June 7, 2019

  Manufacturer:

  FORD

  Summary

  On vehicles equipped with an automatic transmission it is imperative that the converter pilot hub be greased with Motorcraft Multi-Purpose Grease Spray XL-5-A even if grease was not applied from the factory. Also verify that the engine/transmission alignment dowel pins are present as well as the engine crankshaft dowel pin, if equipped, when installing the transmission. Failure to adequately lubricate the converter hub greatly increases the likelihood of the flexplate cracking in the future. Missing dowels may cause a misalignment issue also resulting in a premature failure. Refer to Workshop Manual (WSM), Section 307-01.

  Associated Products (272)

  2019 Ford E-3502019 Ford Ecosport2019 Ford Edge2019 Ford Escape2019 Ford Explorer2019 Ford F-1502019 Ford F-2502019 Ford F-3502019 Ford F-4502019 Ford F-5502019 Ford F-6502019 Ford F-7502019 Ford Fiesta2019 Ford Flex2019 Ford Fusion2019 Ford Mustang2019 Ford Taurus2019 Ford Transit2019 Ford Transit Connect2019 Lincoln Continental+ 252 more
  Associated Documents

  • DownloadMC-10160931-0001.pdf↗
• May 9, 2019•Document ID: 10160871

  Service Bulletin/Repair Instructions
  ENGINE AND ENGINE COOLING

  Mfr Comm. #:

  TSB19-2143

  Date Added:

  June 5, 2019

  Manufacturer:

  FORD

  Summary

  Some 2011-2016 F-Super Duty vehicles equipped with a 6.7L diesel engine may exhibit a lack of power and/or illuminated malfunction indicator lamp (MIL) with diagnostic trouble code (DTC) P0299 in the powertrain control module (PCM). This may be due to the charge air cooler (CAC) outlet tube assembly becoming disconnected at the throttle body or a separation at the CAC tube crimp clamp. To resolve this concern, follow the Service Procedure steps to replace the CAC outlet tube assembly.Follow the service procedure steps to correct the condition.

  Associated Products (24)

  2016 Ford F-2502016 Ford F-3502016 Ford F-4502016 Ford F-5502015 Ford F-2502015 Ford F-3502015 Ford F-4502015 Ford F-5502014 Ford F-2502014 Ford F-3502014 Ford F-4502014 Ford F-5502013 Ford F-2502013 Ford F-3502013 Ford F-4502013 Ford F-5502012 Ford F-2502012 Ford F-3502012 Ford F-4502012 Ford F-550+ 4 more
  Associated Documents

  • DownloadMC-10160871-0001.pdf↗
• April 26, 2019•Document ID: 10159494

  Service Bulletin/Repair Instructions
  ENGINE

  Mfr Comm. #:

  SSM 47948

  Date Added:

  May 7, 2019

  Manufacturer:

  FORD

  Summary

  SSM 47948 - 2010-2019 Various Vehicles - Turbocharged Engines - Oil Supply Filter Replacement When Replacing The Turbocharger Or The Turbocharger Oil Supply Tube For 2010-2019 vehicles equipped with turbocharged engines, when diagnosing and/or replacing turbo related concerns, all steps within the Workshop Manual (WSM) procedure must be followed including replacement of all mandatory discarded parts. When specified in the WSM, the turbocharger oil supply filter must be replaced whenever the turbocharger or the turbocharger oil supply tube are replaced. Turbocharger bearing failure may occur if oil starvation occurs due to a restricted filter.

  Associated Products (163)

  2019 Ford Edge2019 Ford Escape2019 Ford Explorer2019 Ford F-1502019 Ford F-2502019 Ford F-3502019 Ford F-4502019 Ford F-5502019 Ford F-6502019 Ford F-7502019 Ford Flex2019 Ford Fusion2019 Ford Mustang2019 Ford Taurus2019 Ford Transit2019 Lincoln Continental2019 Lincoln MKC2019 Lincoln MKT2019 Lincoln MKX2019 Lincoln MKZ+ 143 more
  Associated Documents

  • DownloadMC-10159494-0001.pdf↗
• April 26, 2019•Document ID: 10159489

  Service Bulletin/Repair Instructions
  EQUIPMENT:APPLIANCE:AIR CONDITIONER; ELECTRICAL SYSTEM

  Mfr Comm. #:

  SSM 47850

  Date Added:

  May 7, 2019

  Manufacturer:

  FORD

  Summary

  Some 2013-2019 vehicles equipped with a EVDC air conditioning (A/C) compressor may exhibit poor A/C performance/improper climate function and/or a diagnostic trouble code (DTC) P06A0 in the powertrain control module (PCM). To support the proper diagnosis of this compressor, the EVDC control valve tester has been developed and is available from Rotunda (339-EVDC100). A tester has been provided to each U.S. dealership free of charge with shipments completed 19-Apr-2019 (reference EFC07013 on FMCDealer.com). This tester will help reduce the potential for misdiagnosis and unnecessary compressor replacement. Make sure that this tester is used for warranty repairs and document the test results in the Technician Comments field. Refer to the Rotunda catalog for a video and user manual which provide detailed operating instructions.

  Associated Products (181)

  2019 Ford E-3502019 Ford Ecosport2019 Ford Edge2019 Ford Escape2019 Ford Explorer2019 Ford F-1502019 Ford F-2502019 Ford F-3502019 Ford F-4502019 Ford F-5502019 Ford Fiesta2019 Ford Flex2019 Ford Fusion2019 Ford Mustang2019 Ford Taurus2019 Ford Transit2019 Ford Transit Connect2019 Lincoln Continental2019 Lincoln MKC2019 Lincoln MKT+ 161 more
  Associated Documents

  • DownloadMC-10159489-0001.pdf↗
• March 22, 2019•Document ID: 10156600

  Service Bulletin/Repair Instructions
  ELECTRICAL SYSTEM; ELECTRICAL SYSTEM:12V/24V/48V BATTERY

  Mfr Comm. #:

  SSM 47886

  Date Added:

  April 3, 2019

  Manufacturer:

  FORD

  Summary

  Some 2012-2016 F-Super Duty vehicles may exhibit a battery cable clamp corrosion concern at the positive battery terminal. It is not necessary to replace the complete battery cable harness CC3Z-14300-A for this concern. Positive battery cable clamp BT4Z-14450-AA is available and can be used to replace just the corroded terminal. Do not cut or shorten the battery cable, but instead remove the corroded battery cable clamp and clean the cable end as necessary. Bend the new battery cable clamp as needed and crimp it to the existing battery cable. Make sure to use heat shrink tubing over the battery cable to battery cable clamp connection. Obtain the heat shrink tube locally.

  Associated Products (20)

  2016 Ford F-2502016 Ford F-3502016 Ford F-4502016 Ford F-5502015 Ford F-2502015 Ford F-3502015 Ford F-4502015 Ford F-5502014 Ford F-2502014 Ford F-3502014 Ford F-4502014 Ford F-5502013 Ford F-2502013 Ford F-3502013 Ford F-4502013 Ford F-5502012 Ford F-2502012 Ford F-3502012 Ford F-4502012 Ford F-550
  Associated Documents

  • DownloadMC-10156600-0001.pdf↗