Ram 4500 Service Bulletins (2013)
417 manufacturer communications on file.
- December 18, 2014•Document ID: 10057223Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:SOFTWARE
- Mfr Comm. #:
- 18-002-14 REV.C
- Date Added:
- April 29, 2015
- Manufacturer:
- RAM
SummaryDODGE RAM: 2014 3500/4500 CAB CHASSIS THIS BULLETIN SPECIFIES THE REPROGRAMMING AND ERASING OF THE NEW ENGINE CONTROL MODULE SOFTWARE. *LJ
Associated Products (2)Associated Documents - December 15, 2014•Document ID: 10229900Service Bulletin/Repair InstructionsSERVICE BRAKES, HYDRAULIC
- Mfr Comm. #:
- 0500614
- Date Added:
- January 17, 2023
- Manufacturer:
- DODGE
SummaryFront And/Or Rear Brake Noise (Squeal) This bulletin involves replacing the front and rear brake pads and rear rotors to correct a brake squeal condition. The customer may experience a squealing noise during braking coming from the front and/or rear the vehicle.
Associated Products (6)Associated Documents - December 15, 2014•Document ID: 10221068Service Bulletin/Repair InstructionsBACK OVER PREVENTION; SERVICE BRAKES, HYDRAULIC
- Mfr Comm. #:
- 0500614
- Date Added:
- September 26, 2022
- Manufacturer:
- DODGE
SummaryFront And/Or Rear Brake Noise (Squeal) This bulletin involves replacing the front and rear brake pads and rear rotors to correct a brake squeal condition. The customer may experience a squealing noise during braking coming from the front and/or rear the vehicle.
Associated Products (6)Associated Documents - December 15, 2014•Document ID: 10139898Service Bulletin/Repair InstructionsSERVICE BRAKES
- Mfr Comm. #:
- 05-006-14
- Date Added:
- June 11, 2018
- Manufacturer:
- DODGE
SummaryFront And/Or Rear Brake Noise (Squeal) This bulletin involves replacing the front and rear brake pads and rear rotors to correct a brake squeal condition. The customer may experience a squealing noise during braking coming from the front and/or rear the vehicle.
Associated Products (6)Associated Documents - December 15, 2014•Document ID: 10061866Service Bulletin/Repair InstructionsSERVICE BRAKES
- Mfr Comm. #:
- 05-006-14
- Date Added:
- April 12, 2016
- Manufacturer:
- DODGE
SummarySUMMARY TO BE PROVIDED ON A FUTURE DATE.
Associated Products (6)Associated Documents - December 12, 2014•Document ID: 10229897Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; FUEL SYSTEM, DIESEL
- Mfr Comm. #:
- 1400114
- Date Added:
- January 17, 2023
- Manufacturer:
- RAM
SummaryFuel Gelling in Cold Ambient Temperatures This bulletin involves reconfiguring the Body Control Module (BCM). Some customers may experience a Malfunction Indicator Lamp (MIL) due to fuel related Diagnostic Trouble Code (DTC) and/or may have a hard or no start condition due to fuel gelling in cold ambient temperatures (20°F or -7°C) or below. DTCs, such as P0087, P0191 or P026B (or other DTCs) may have been set.frame mounted fuel filter heater not to function. The condition is due to a configuration setting in the Body Control Module (BCM).
Associated Products (6)Associated Documents - December 12, 2014•Document ID: 10221065Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; EXTERIOR LIGHTING; STRUCTURE
- Mfr Comm. #:
- 1400114REVB
- Date Added:
- September 26, 2022
- Manufacturer:
- RAM
SummaryFuel Gelling in Cold Ambient Temperatures This bulletin involves reconfiguring the Body Control Module (BCM). Some customers may experience a Malfunction Indicator Lamp (MIL) due to fuel related Diagnostic Trouble Code (DTC) and/or may have a hard or no start condition due to fuel gelling in cold ambient temperatures (20°F or -7°C) or below. DTCs, such as P0087, P0191 or P026B (or other DTCs) may have been set.frame mounted fuel filter heater not to function. The condition is due to a configuration setting in the Body Control Module (BCM).
Associated Products (8)Associated Documents - December 12, 2014•Document ID: 10139895Service Bulletin/Repair InstructionsFUEL SYSTEM, GASOLINE; ELECTRICAL SYSTEM:SOFTWARE
- Mfr Comm. #:
- 14-001-14 REV. B
- Date Added:
- June 11, 2018
- Manufacturer:
- RAM
SummaryFuel Gelling in Cold Ambient Temperatures This bulletin involves reconfiguring the Body Control Module (BCM). Some customers may experience a Malfunction Indicator Lamp (MIL) due to fuel related Diagnostic Trouble Code (DTC) and/or may have a hard or no start condition due to fuel gelling in cold ambient temperatures (20°F or -7°C) or below. DTCs, such as P0087, P0191 or P026B (or other DTCs) may have been set.frame mounted fuel filter heater not to function. The condition is due to a configuration setting in the Body Control Module (BCM).
Associated Products (7)Associated Documents - December 12, 2014•Document ID: 10062968Service Bulletin/Repair InstructionsFUEL SYSTEM, OTHER
- Mfr Comm. #:
- 14-001-14REV.B
- Date Added:
- April 26, 2016
- Manufacturer:
- RAM
SummarySUMMARY TO BE PROVIDED ON A FUTURE DATE.
Associated Products (8)Associated Documents - November 14, 2014•Document ID: 10218208Service Bulletin/Repair InstructionsPOWER TRAIN; FUEL SYSTEM, GASOLINE; ELECTRICAL SYSTEM; FUEL SYSTEM, DIESEL; EXTERIOR LIGHTING; BACK OVER PREVENTION; SERVICE BRAKES, HYDRAULIC
- Mfr Comm. #:
- 18-062-14
- Date Added:
- August 22, 2022
- Manufacturer:
- RAM
SummaryFlash: 6.7L Diagnostic and System Improvements This bulletin involves selectively erasing and reprogramming the Engine Control Module (ECM) with new software. Several software improvements are available for vehicles equipped with a Cummins 6.7L Turbo Diesel. These improvements are separated into the following categories.Prevent Or Reduce Unnecessary Malfunction Indicator Lamp (MIL) Illumination For The Following Diagnostic Trouble Codes (DTCs). These DTCs Are Currently Set As A One Trip Fault And Should Be A Two Trip Fault: P0201 - P0206 - Fuel Injector X Circuit/Open. U110E - Lost Ambient Temperature Message. P049D - EGR Control Position Exceeded Learning Limit.These DTCs Are Currently Set As A Two Trip Fault And Should Have Been A One Trip Fault: U12A4 - LOST COMMUNICATION WITH AMMONIA SENSOR Improvements To Prevent Or Reduce Unnecessary Malfunction Indicator Lamp (Mil) Illumination For: P2281 - Air Leak Between MAF and Throttle Body. U3017 - Control Module Timer/Clock Performance. U1421 - Implausible Ignition Key Off Time Received. P0128 - Thermostat Rationality. In cold ambient temperatures. P0087 - Fuel Rail Pressure Too Low. P0544 - Exhaust Gas Temperature Sensor Circuit - Bank 1 Sensor 1. P2002 - Diesel Particulate Filter Efficiency Below Threshold. P061A - Level 2 Torque Performance. P0234 - Turbocharger Over boost condition. P026A - Charge Air Cooler Efficiency Below Threshold. P0299 - Manifold Pressure Sensor Out of Range Low. P0544 - Exhaust Gas Temperature (EGT) Sensor Circuit - Bank 1 Sensor 1. P0562 - Battery Voltage Low. P20EE - SCR NOX Catalyst Efficiency Below Threshold - Bank 1. P2201 - Aftertreatment NOX Sensor Circuit Performance - Bank 1 Sensor 1. P24A5 - EGR Cooler Bypass Bank 1 Control Stuck. P2459 - Diesel Particulate Filter Regeneration Too Frequent. P249E - Closed Loop SCR Reductant Injection Control At Limit - Flow Too High.
Associated Products (2)Associated Documents - November 14, 2014•Document ID: 10218203Service Bulletin/Repair InstructionsFUEL SYSTEM, DIESEL; FUEL SYSTEM, GASOLINE; POWER TRAIN
- Mfr Comm. #:
- 18-010-14
- Date Added:
- August 22, 2022
- Manufacturer:
- RAM
SummaryFlash: Doser Control Unit (DCU), Heater Thaw Time Improvements And MIL Illumination This bulletin involves selectively erasing and reprogramming the Doser Control Unit (DCU) with new software. Software improvements are available for the Diesel Exhaust Fluid (DEF) DCU on vehicles equipped with a Cummins 6.7L turbo Diesel. The software contains improvements for the following: Increase in DEF thaw time when ambient and DEF tank temperatures are below -14°C. (7°F.). P208D - (DIESEL EXHAUST FLUID) REDUCTANT PUMP CONTROL CIRCUIT HIGH P202E - (DIESEL EXHAUST FLUID) REDUCTANT INJECTOR PERFORMANCE
Associated Products (6)Associated Documents - November 14, 2014•Document ID: 10139841Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- 18-062-14
- Date Added:
- June 11, 2018
- Manufacturer:
- RAM
SummaryFlash: 6.7L Diagnostic and System Improvements This bulletin involves selectively erasing and reprogramming the Engine Control Module (ECM) with new software. Several software improvements are available for vehicles equipped with a Cummins 6.7L Turbo Diesel. These improvements are separated into the following categories.Prevent Or Reduce Unnecessary Malfunction Indicator Lamp (MIL) Illumination For The Following Diagnostic Trouble Codes (DTCs). These DTCs Are Currently Set As A One Trip Fault And Should Be A Two Trip Fault: P0201 - P0206 - Fuel Injector X Circuit/Open. U110E - Lost Ambient Temperature Message. P049D - EGR Control Position Exceeded Learning Limit.These DTCs Are Currently Set As A Two Trip Fault And Should Have Been A One Trip Fault: U12A4 - LOST COMMUNICATION WITH AMMONIA SENSOR Improvements To Prevent Or Reduce Unnecessary Malfunction Indicator Lamp (Mil) Illumination For: P2281 - Air Leak Between MAF and Throttle Body. U3017 - Control Module Timer/Clock Performance. U1421 - Implausible Ignition Key Off Time Received. P0128 - Thermostat Rationality. In cold ambient temperatures. P0087 - Fuel Rail Pressure Too Low. P0544 - Exhaust Gas Temperature Sensor Circuit - Bank 1 Sensor 1. P2002 - Diesel Particulate Filter Efficiency Below Threshold P061A - Level 2 Torque Performance. P0234 - Turbocharger Overboost condition. P026A - Charge Air Cooler Efficiency Below Threshold. P0299 - Manifold Pressure Sensor Out of Range Low. P0544 - Exhaust Gas Temperature (EGT) Sensor Circuit - Bank 1 Sensor 1. P0562 - Battery Voltage Low. P20EE - SCR NOX Catalyst Efficiency Below Threshold - Bank 1. P2201 - Aftertreatment NOX Sensor Circuit Performance - Bank 1 Sensor 1. P24A5 - EGR Cooler Bypass Bank 1 Control Stuck. P2459 - Diesel Particulate Filter Regeneration Too Frequent. P249E - Closed Loop SCR Reductant Injection Control At Limit - Flow Too High.Other Updates:
Associated Products (3)Associated Documents - November 14, 2014•Document ID: 10139836Service Bulletin/Repair InstructionsFUEL SYSTEM, DIESEL
- Mfr Comm. #:
- 18-010-14 REV. A
- Date Added:
- June 11, 2018
- Manufacturer:
- RAM
SummaryFlash: Doser Control Unit (DCU), Heater Thaw Time Improvements And MIL Illumination This bulletin involves selectively erasing and reprogramming the Doser Control Unit (DCU) with new software. Software improvements are available for the Diesel Exhaust Fluid (DEF) DCU on vehicles equipped with a Cummins 6.7L turbo Diesel. The software contains improvements for the following: Increase in DEF thaw time when ambient and DEF tank temperatures are below -14°C. (7°F.). P208D - (DIESEL EXHAUST FLUID) REDUCTANT PUMP CONTROL CIRCUIT HIGH P202E - (DIESEL EXHAUST FLUID) REDUCTANT INJECTOR PERFORMANCE
Associated Products (8)Associated Documents - November 14, 2014•Document ID: 10063752Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:SOFTWARE
- Mfr Comm. #:
- 18-062-14
- Date Added:
- May 9, 2016
- Manufacturer:
- RAM
SummarySUMMARY TO BE PROVIDED ON A FUTURE DATE.
Associated Products (3)Associated Documents - November 14, 2014•Document ID: 10063255Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:SOFTWARE
- Mfr Comm. #:
- 18-010-14REV.A
- Date Added:
- April 26, 2016
- Manufacturer:
- RAM
SummarySUMMARY TO BE PROVIDED ON A FUTURE DATE.
Associated Products (8)Associated Documents - November 14, 2014•Document ID: 10231999Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; ENGINE AND ENGINE COOLING
- Mfr Comm. #:
- 1806214
- Date Added:
- February 21, 2023
- Manufacturer:
- RAM
Summary6.7L Diagnostic and System Improvements
Associated Products (3)Associated Documents - November 14, 2014•Document ID: 10231991Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 1801014
- Date Added:
- February 21, 2023
- Manufacturer:
- RAM
SummaryDoser Control Unit (DCU), Heater Thaw Time Improvements And MIL Illumination
Associated Products (8)Associated Documents - November 13, 2014•Document ID: 10218199Service Bulletin/Repair InstructionsVISIBILITY
- Mfr Comm. #:
- 08-097-14
- Date Added:
- August 22, 2022
- Manufacturer:
- RAM
SummaryMirror Tilt In Reverse Feature Is Not Functioning Correctly This bulletin involves reconfiguring the vehicle for proper mirror tilt in reverse operation. The customer may describe one mirror tilting in reverse and the other mirror not tilting and/or the customer may describe not being able to turn the tilt in reverse feature on/off.
Associated Products (8)Associated Documents - November 13, 2014•Document ID: 10139832Service Bulletin/Repair InstructionsVISIBILITY:REARVIEW MIRRORS/DEVICES
- Mfr Comm. #:
- 08-097-14
- Date Added:
- June 11, 2018
- Manufacturer:
- RAM
SummaryMirror Tilt In Reverse Feature Is Not Functioning Correctly This bulletin involves reconfiguring the vehicle for proper mirror tilt in reverse operation. The customer may describe one mirror tilting in reverse and the other mirror not tilting and/or the customer may describe not being able to turn the tilt in reverse feature on/off.
Associated Products (10)Associated Documents - November 13, 2014•Document ID: 10062931Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 08-097-14
- Date Added:
- April 26, 2016
- Manufacturer:
- RAM
SummarySUMMARY TO BE PROVIDED ON A FUTURE DATE.
Associated Products (10)Associated Documents