Kia Optima Service Bulletins (2015)
268 manufacturer communications on file.
- September 20, 2018•Document ID: 10145159Service Bulletin/Repair InstructionsENGINE; ELECTRICAL SYSTEM:SOFTWARE
- Mfr Comm. #:
- VPI1802A1_OWNER
- Date Added:
- October 9, 2018
- Manufacturer:
- KIA
SummaryPRODUCT IMPROVEMENT CAMPAIGN (PI1802A1) UPDATE - OWNER LETTER - Dear Kia Optima Owner: As we previously notified you, Kia Motors America, Inc. is conducting an important Product Improvement Campaign to perform a software update on some 2014 MY Optima vehicles equipped with 2.4L Gasoline Direct Injection (?GDI?) engines, and all 2015 MY Optima vehicles equipped with 2.4L GDI and 2.0L Turbocharged GDI (?T-GDI?) engines to protect the engine from excessive connecting rod bearing damage by utilizing a Knock Sensor Detection System (?KSDS?). Our records show that the KSDS software was recently installed in your vehicle and we want to thank you for your quick action. Since then, Kia has become aware that the KSDS software version installed in your vehicle has an error and requires the installation of a new corrected software.
Associated Products (2)Associated Documents - September 20, 2018•Document ID: 10145158Service Bulletin/Repair InstructionsENGINE; ELECTRICAL SYSTEM:SOFTWARE
- Mfr Comm. #:
- VPI1802A1_DSM
- Date Added:
- October 9, 2018
- Manufacturer:
- KIA
SummaryPRODUCT IMPROVEMENT CAMPAIGN (PI1802A1) UPDATE - DEALER SERVICE MANAGER LETTER - As announced in July 2018, Kia Motors America, Inc. has been conducting a Product Improvement Campaign (PI1802) to perform a software update to protect the engine from excessive connecting rod bearing damage by utilizing a Knock Sensor Detection System (?KSDS?) on certain Kia vehicles. Since the launch of this Product Improvement Campaign, Kia has become aware that the KSDS software version installed on 2014~2015 MY Optima vehicles before September 7, 2018 has an error and requires the installation of a new corrected software.
Associated Products (2)Associated Documents - September 10, 2018•Document ID: 10145163Service Bulletin/Repair InstructionsEQUIPMENT:OTHER:LABELS
- Mfr Comm. #:
- VSC152_OWNER_TFE
- Date Added:
- October 9, 2018
- Manufacturer:
- KIA
SummaryEMISSIONS SERVICE CAMPAIGN (SC152) - OWNER LETTER - Dear Kia Optima Hybrid Owner: Kia Motors America, Inc. is conducting a Voluntary Emissions Service Campaign to replace the Vehicle Emission Control Information (VECI) Label on all 2015, 2016, and some 2017 MY Optima Hybrid vehicles.
Associated Products (3)Associated Documents - September 6, 2018•Document ID: 10145164Service Bulletin/Repair InstructionsEQUIPMENT:OTHER:LABELS
- Mfr Comm. #:
- VSC152_QA
- Date Added:
- October 9, 2018
- Manufacturer:
- KIA
SummaryQUESTIONS AND ANSWERS - SC152 ? VEHICLE EMISSION CONTROL (VECI) LABEL REPLACEMENT VOLUNTARY EMISSIONS SERVICE CAMPAIGN
Associated Products (4)Associated Documents - September 6, 2018•Document ID: 10145161Service Bulletin/Repair InstructionsEQUIPMENT:OTHER:LABELS; ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL
- Mfr Comm. #:
- VSC152_DSM
- Date Added:
- October 9, 2018
- Manufacturer:
- KIA
SummaryEMISSIONS SERVICE CAMPAIGN (SC152) - DEALER PARTS AND SERVICE MANAGER LETTER - Kia Motors America, Inc. is conducting a Voluntary Emissions Service Campaign to replace the Vehicle Emission Control Information (VECI) Label on all 2015, 2016, and some 2017 MY Optima Hybrid vehicles produced from July 24, 2014 through June 12, 2017, and on some 2018 MY Stinger rear-wheel drive (RWD) and all-wheel drive (AWD) vehicles equipped with Theta 2.0-T engines, produced from September 29, 2017 through November 20, 2017. An incorrect VECI label was installed during the production of these vehicles. The VECI label is extremely important when performing maintenance, emissions inspection, or ordering engine and engine management related parts. It also contains the code that tells a testing facility which test to perform to ensure the vehicle is tested to the correct emission standard.
Associated Products (4)Associated Documents - September 6, 2018•Document ID: 10145160Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL; EQUIPMENT:OTHER:LABELS
- Mfr Comm. #:
- VSC152_DP
- Date Added:
- October 9, 2018
- Manufacturer:
- KIA
SummaryEMISSIONS SERVICE CAMPAIGN (SC152) - DEALER PRINCIPAL LETTER - Kia Motors America, Inc. is conducting a Voluntary Emissions Service Campaign to replace the Vehicle Emission Control Information (VECI) Label on all 2015, 2016, and some 2017 MY Optima Hybrid vehicles produced from July 24, 2014 through June 12, 2017, and on some 2018 MY Stinger rear-wheel drive (RWD) and all-wheel drive (AWD) vehicles equipped with Theta 2.0-T engines, produced from September 29, 2017 through November 20, 2017. An incorrect VECI label was installed during the production of these vehicles. The VECI label is extremely important when performing maintenance, emissions inspection, or ordering engine and engine management related parts. It also contains the code that tells a testing facility which test to perform to ensure the vehicle is tested to the correct emission standard.
Associated Products (4)Associated Documents - August 29, 2018•Document ID: 10145157Service Bulletin/Repair InstructionsENGINE
- Mfr Comm. #:
- VPI1802_WTY
- Date Added:
- October 9, 2018
- Manufacturer:
- KIA
SummaryPRODUCT IMPROVEMENT CAMPAIGN (PI1802) - WARRANTY BULLETIN - KMA launched Product Improvement Campaign PI1802A on July 25, 2018 to perform a software update on certain vehicles with 2.4L GDI engines to alert vehicle drivers at an early stage of bearing wear to prevent severe engine damage.
Associated Products (5)Associated Documents - August 27, 2018•Document ID: 10144240Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- VPI1802_TSB_R1
- Date Added:
- September 10, 2018
- Manufacturer:
- KIA
SummaryTSB: PRODUCT IMPROVEMENT CAMPAIGN: KNOCK SENSOR DETECTION SYSTEM - ECU LOGIC IMPROVEMENT (PI1802) - This bulletin provides information related to a software update to the Engine Control Unit (ECU) to install the Knock Sensor Detection System (KSDS) in order to protect the engine from excessive connecting rod bearing damage. This update is for: * Some 2014MY Optima (TF) vehicles equipped with 2.4L GDI engines, manufactured at KMC from August 29, 2013 through April 25, 2014; * All 2015MY Optima (TF/QF) vehicles equipped with 2.4L GDI and 2.0L Turbocharged GDI (T-GDI) engines; * All 2014-2015MY Sportage (SL) vehicles equipped with 2.4L GDI and 2.0L Turbocharged GDI (T-GDI) engines; * All 2015MY Sorento (XMa) vehicles equipped with 2.4L GDI engines, manufactured from January 3, 2014 through December 11, 2014. The KSDS detects vibrations indicating the onset of excessive connecting rod bearing wear. It is designed to alert the driver at an early stage of bearing wear before the occurrence of severe engine damage, including engine failure. If vibrations caused by bearing wear start to occur, the Malfunction Indicator Lamp (MIL) will blink continuously, and the vehicle will be placed in Limp Home Mode. This will reduce further damage to the engine and ensure that the vehicle occupants are not exposed to the risk of a more severe engine failure. At that time, Diagnostic Trouble Code (?DTC?) P1326, specific to the KSDS, will be recorded in the ECU. The vehicle can continue to be operated for a limited time in Limp Home Mode, but it will accelerate slowly and have a reduced maximum speed. Also, engine RPMs will be limited to approximately 1800-2000 RPM. Kia is requesting the completion of this Product Improvement Campaign on all affected vehicles.
Associated Products (5)Associated Documents - August 27, 2018•Document ID: 10144238Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; ENGINE AND ENGINE COOLING
- Mfr Comm. #:
- VPI1802_OWNER_OP
- Date Added:
- September 10, 2018
- Manufacturer:
- KIA
SummaryPRODUCT IMPROVEMENT CAMPAIGN: Dear Kia Optima Owner: Kia Motors America, Inc. is conducting an important Product Improvement Campaign to perform a software update on some 2014 MY Optima vehicles equipped with 2.4L Gasoline Direct Injection (?GDI?) engines, and all 2015 MY Optima vehicles equipped with 2.4L GDI and 2.0L Turbocharged GDI (?T-GDI?) engines to protect the engine from excessive connecting rod bearing damage. The update will be done free of charge and will only involve the addition of newly developed computer software for the Engine Control Unit (?ECU?).
Associated Products (2)Associated Documents - August 16, 2018•Document ID: 10144232Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- TSBELE151
- Date Added:
- September 10, 2018
- Manufacturer:
- KIA
SummaryTSB: BMS LOGIC IMPROVEMENT AFTER HIGH VOLTAGE BATTERY REPLACEMENT - This bulletin provides the procedure to improve the logic of the Battery Management System (BMS) on some 2011-2016MY Optima Hybrid (TF HEV) vehicles, produced from February 15, 2011 through July 22, 2015, to match the new generation high voltage (HV) battery assemblies.
Associated Products (6)Associated Documents - August 13, 2018•Document ID: 10144237Service Bulletin/Repair InstructionsPOWER TRAIN
- Mfr Comm. #:
- TSBTRA079
- Date Added:
- September 10, 2018
- Manufacturer:
- KIA
SummaryTSB: SERVICE ACTION: HCU/TCU LOGIC IMPROVEMENT FOR DTC P1744 (400 MESH EQUIPPED TRANS) (SA351) - This bulletin provides the procedure to improve the logic of the Hybrid Control Unit (HCU) and the Transmission Control Unit (TCU) on some 2013-2015MY Optima Hybrid (TF HEV) vehicles, produced from September 27, 2012 through September 5, 2014, which may experience a malfunction indicator lamp illumination with DTC P1744. To correct this concern, apply the improved logic to the HCU and TCU using the KDS ECU Upgrade function as described in this bulletin.
Associated Products (3)Associated Documents - August 13, 2018•Document ID: 10144235Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; POWER TRAIN
- Mfr Comm. #:
- TSBTRA068_CLOSED
- Date Added:
- September 10, 2018
- Manufacturer:
- KIA
SummaryTSB: HCU/TCU LOGIC IMPROVEMENT FOR DTC P1744 (400 MESH EQUIPPED TRANSMISSIONS ONLY) - TSB TRA068 CLOSED. REFER TO TSB TRA079/SA351
Associated Products (5)Associated Documents - July 30, 2018•Document ID: 10143404Service Bulletin/Repair InstructionsVISIBILITY; LANE DEPARTURE: BLIND SPOT DETECTION
- Mfr Comm. #:
- PS464_R2
- Date Added:
- August 6, 2018
- Manufacturer:
- KIA
SummaryPITSTOP - NO COMMUNICATION WITH BLIND SPOT DETECTION AFTER COLLISION REPAIRS - This Pitstop provides information relating to the vehicles listed below with Blind Spot Detection (BSD), which may exhibit a ?Check BSD System? message and no communication with the BSD system after collision repairs.
Associated Products (11)Associated Documents - July 25, 2018•Document ID: 10143474Service Bulletin/Repair InstructionsEQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL; ENGINE; POWER TRAIN; ELECTRICAL SYSTEM:SOFTWARE
- Mfr Comm. #:
- VPI1802_QA
- Date Added:
- August 6, 2018
- Manufacturer:
- KIA
SummaryQ & A - This document is the Q & A for the new Product Improvement Campaign to provide information regarding a software update to the Engine Control Unit (ECU) to protect the engine from excessive connecting rod bearing damage.
Associated Products (14)Associated Documents - July 16, 2018•Document ID: 10143472Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:SOFTWARE; ENGINE; POWER TRAIN
- Mfr Comm. #:
- VPI1802_DSM
- Date Added:
- August 6, 2018
- Manufacturer:
- KIA
SummaryDEALER SERVICE MANAGER NOTICE - This notice advised the dealer service manager of the new Product Improvement Campaign to perform a software update to the Engine Control Unit (ECU) to protect the engine from excessive connecting rod bearing damage.
Associated Products (14)Associated Documents - July 16, 2018•Document ID: 10143471Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:SOFTWARE; ENGINE
- Mfr Comm. #:
- VPI1802_DP
- Date Added:
- August 6, 2018
- Manufacturer:
- KIA
SummaryDEALER PRINCIPAL NOTICE - This notice advised the dealer principal of the new Product Improvement Campaign to perform a software update to the Engine Control Unit (ECU) to protect the engine from excessive connecting rod bearing damage.
Associated Products (14)Associated Documents - May 17, 2018•Document ID: 10142244Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- TSBELE147
- Date Added:
- June 25, 2018
- Manufacturer:
- KIA
SummaryTSB - BMS LOGIC IMPROVEMENT FOR DTC P1B70 - This bulletin provides the procedure to improve the logic of the Battery Management System (BMS) on some 2011-2016MY Optima Hybrid (TF HEV) vehicles, produced from February 15, 2011 through July 22, 2015, which may experience a malfunction indicator light (MIL) illumination with DTC P1B70 even though there is no actual malfunction.
Associated Products (6)Associated Documents - April 10, 2018•Document ID: 10136505Service Bulletin/Repair InstructionsPOWER TRAIN; POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM)
- Mfr Comm. #:
- TSBTRA059_R4
- Date Added:
- May 14, 2018
- Manufacturer:
- KIA
SummaryTSB - HCU/TCU UPGRADE ? FOR 100MESH SOLENOID - EQUIPPED HYBRID TRANSMISSIONS - This bulletin has been revised to include additional information. This bulletin provides information related to a software upgrade of the Hybrid Control Unit (HCU) and the Transmission Control Unit (TCU) of some 2011-2016MY Optima Hybrid (TF HEV) after replacement of the transmission with improved 100 mesh solenoids has taken place.
Associated Products (6)Associated Documents - March 21, 2018•Document ID: 10133183Service Bulletin/Repair InstructionsPOWER TRAIN
- Mfr Comm. #:
- TSBTRA059_R3
- Date Added:
- April 16, 2018
- Manufacturer:
- KIA
SummaryTSB - HCU/TCU UPGRADE ? FOR 100MESH SOLENOID EQUIPPED HYBRID TRANSMISSIONS - This bulletin has been revised to include additional information. This bulletin provides information related to a software upgrade of the Hybrid Control Unit (HCU) and the Transmission Control Unit (TCU) of some 2011-2016MY Optima Hybrid (TF HEV) after replacement of the transmission with improved 100 mesh solenoids has taken place. To apply the improved logic, the HCU/TCU should be reprogrammed using the KDS download, as described in this bulletin.
Associated Products (6)Associated Documents - March 7, 2018•Document ID: 10133178Service Bulletin/Repair InstructionsEQUIPMENT
- Mfr Comm. #:
- TSBELE129_R2
- Date Added:
- April 16, 2018
- Manufacturer:
- KIA
SummaryTSB - UVO SOFTWARE UPGRADE - This bulletin has been revised and is no longer a Service Action. This bulletin provides the procedure to upgrade the UVO software on some 2015MY Soul (PS), Sportage (SL), Optima (TF, QF), Forte (YD), and Sorento (XMa) vehicles to incorporate Bluetooth and Voice Recognition improvements.
Associated Products (5)Associated Documents