Jeep Grand Cherokee Service Bulletins (2014)
634 manufacturer communications on file.
- June 23, 2015•Document ID: 10150623Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 08-016-15 REVA
- Date Added:
- December 10, 2018
- Manufacturer:
- JEEP
SummaryPoor Radio Reception This bulletin involves replacing the satellite antenna if needed. A customer may experience, SXM (Sirius/XM) radio has intermittent muting. This occurs in areas where XM signal is degraded and cell signal is very weak. The condition happens when the optional vehicle internet connection through the cell network is in use with the internal vehicle Wi-Fi. This Symptom/Condition Only Applies to 2014-2015 WD, WK or KL Vehicles. A customer may experience a popping noise when listening to AM stations.
Associated Products (8)Associated Documents - May 28, 2015•Document ID: 10148937Service Bulletin/Repair InstructionsSTRUCTURE:BODY:HOOD
- Mfr Comm. #:
- 08-056-15
- Date Added:
- November 26, 2018
- Manufacturer:
- JEEP
SummaryImproper Hood Switch Operation This bulletin involves performing a Body Control Module (BCM) Proxi Configuration and Proxi Alignment. The customer may notice that the security alarm will not sound when the hood is opened.
Associated Products (2)Associated Documents - May 27, 2015•Document ID: 10148929Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- 18-023-15 REVA
- Date Added:
- November 26, 2018
- Manufacturer:
- JEEP
SummaryFlash: 3.0 L MIL Illumination Diagnostic and System Improvements This bulletin involves reprogramming the Powertrain Control Module (PCM) with the latest available software. A small number of customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the Technician may find one or more of the following Diagnostic Trouble Code(s) may have been set: ? P20C2-00 - Reductant Heater 3 Control Circuit Performance. ? P204F-00 - Reductant System Performance. ? P20E9-00 - Reductant Pressure Too High. ? P249C-00 - Excessive Time To Enter Closed Loop Reductant Injection Timing Control. ? P1288-00 - NOX Sensor 1/2 Zero Offset Too High. ? P2002-00 - Diesel Particulate Filter Efficiency Below Threshold. ? P2299-00 - Brake Pedal Position / Accelerator Pedal Position Incompatible. ? P241d-00 - Scr Inducement - Forced Engine Shutdown. ? P0087-00 - Fuel Rail Pressure Too Low. ? P20EE-00 - SCR NOX Catalyst Efficiency Below Threshold Bank 1. ? P0171-00 - System Too Lean (Bank 1). ? P0172-00 - System Too Rich (Bank 1). ? P225C-00 - NOX Sensor Performance - Signal Stuck High Bank 1 Sensor 1. ? P225D-00 - NOX Sensor 1/1 Performance - Signal Stuck Low. ? P1289-00 - NOX Sensor 1/2 Zero Offset Too Low. ? P1296-00 - EGR Slow Response - Increasing Flow. ? P1297-00 - EGR Slow Response - Decreasing Flow. ? P2BA9-00 - NOX Exceedence - Insufficient Reagent Quality. ? P2080-00 - Exhaust Gas Temperature Sensor Circuit Performance. ? P2084-00 - Exhaust Gas Temperature Sensor Circuit Performance-Bank 1 Sensor 2. ? P0426-00 - Catalyst Temperature Sensor Circuit Performance Bank 1 Sensor 1. ? P242B-00 - Exhaust Gas Temperature Sensor Circuit Performance-Bank 1 Sensor 3. ? P062B-00 - Internal Control Module Fuel Injector Control Circuit Performance. ? P0088-00 - Fuel Rail Pressure Too High. ? P016F-00 - Closed Loop fuel Pressure Control At Limit - Pressure Too Low. ? P009A-00 - Intake Air Temperature / Ambient Ai
Associated Products (1)Associated Documents - May 27, 2015•Document ID: 10058531Service Bulletin/Repair InstructionsEQUIPMENT; ELECTRICAL SYSTEM
- Mfr Comm. #:
- SB18-023-15REVA
- Date Added:
- October 5, 2015
- Manufacturer:
- JEEP
SummaryPOWERTRAIN CONTROL MODULE REPROGRAMMING WITH THE LATEST SOFTWARE AVAILABLE DUE TO MALFUNCTION INDICATOR LAMP (MIL) AND VARIOUS DIAGNOSTIC TROUBLE CODES (DTCS). ADDITIONAL SYSTEM ENHANCEMENTS AND NEW LABOR OPS TO BE ADDED *CN
Associated Products (1)Associated Documents - May 21, 2015•Document ID: 10148922Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 18-044-15
- Date Added:
- November 26, 2018
- Manufacturer:
- JEEP
SummaryFlash: Power Control Module Software Enhancements This bulletin involves reprogramming the Powertrain Control Module (PCM) with the latest available software. The customers may experience one or all of the following: - Customer may experience a "detonation" type of noise while accelerating or at idle. - Customers may experience Cruise Control lock out (inoperative) after several ?+? cruise button inputs attempting to increase Cruise Set Speed. Turning the ignition off and back on will clear the condition. - MIL light illuminates and DTC P2463-00 ?Diesel Particulate Filter- Soot Accumulation? set in the PCM. The software is also being released to improve A/C compressor relay duty cycle operation to prevent ignition off battery draw.
Associated Products (1)Associated Documents - May 20, 2015•Document ID: 10148921Service Bulletin/Repair InstructionsPOWER TRAIN
- Mfr Comm. #:
- 21-033-15
- Date Added:
- November 26, 2018
- Manufacturer:
- JEEP
SummaryFlash: Transmission Shift And Drivability Enhancements This bulletin involves reprogramming the Transmission Control Module (TCM) with the latest available software followed by a drive validation. The following software enhancement, for the 948TE 9-speed transmission, is being released to improve diagnostics for the following Diagnostic Trouble Codes (DTCs): ? P0711 - Transmission Fluid Temperature Sensor A Circuit Range-Performance ? P0887 - TCM Power Control Circuit High ? P1720 - Output Speed Sensor-Wheel Speed Rationality ? P1D98 - Incorrect Gear Ratio Clutch B or D Defective ? P215C - Output Shaft Speed Wheel Speed Correlation ? U0401 - Implausible Data Received From ECM-PCM The software also enables DTC P07A7 - Transmission Friction Element C Stuck On to set in the case of a dislodged C-clutch snap-ring.
Associated Products (1)Associated Documents - May 7, 2015•Document ID: 10148905Service Bulletin/Repair InstructionsPOWER TRAIN; ELECTRICAL SYSTEM
- Mfr Comm. #:
- 21-005-15 REVA
- Date Added:
- November 26, 2018
- Manufacturer:
- JEEP
SummaryFlash: Transmission Shift And Drivability Enhancements This bulletin involves reprogramming the Powertrain Control Module (PCM) and Transmission Control Module (TCM) with new software. NOTE: Both the PCM and TCM must be up to date for these changes to be effective.
Associated Products (1)Associated Documents - April 29, 2015•Document ID: 10220433Service Bulletin/Repair InstructionsSEATS
- Mfr Comm. #:
- 0804115
- Date Added:
- September 26, 2022
- Manufacturer:
- JEEP
SummaryFront heated seats improvements.
Associated Products (6)Associated Documents - April 29, 2015•Document ID: 10191404Service Bulletin/Repair InstructionsSEATS
- Mfr Comm. #:
- 08-041-15
- Date Added:
- May 3, 2021
- Manufacturer:
- DODGE
SummaryFront heated seats improvements.
Associated Products (6)Associated Documents - April 24, 2015•Document ID: 10150553Service Bulletin/Repair InstructionsSERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:DISC:CALIPER; SERVICE BRAKES, HYDRAULIC; SERVICE BRAKES, AIR:DISC:CALIPER
- Mfr Comm. #:
- 05-002-15
- Date Added:
- December 10, 2018
- Manufacturer:
- DODGE
SummaryFront Brake Squeak/Squeal Noise This bulletin involves replacing the front brake caliper guide pin bushings. The customer may describe a front brake squeak/squeal noise at cold temperatures or with cold brakes after sitting. Noise is most prevalent during a low-speed stop with light brake pedal effort.
Associated Products (10)Associated Documents - March 31, 2015•Document ID: 10144870Service Bulletin/Repair InstructionsSTRUCTURE; LATCHES/LOCKS/LINKAGES
- Mfr Comm. #:
- 23-012-15
- Date Added:
- September 24, 2018
- Manufacturer:
- JEEP
SummaryCargo Compartment Load Floor Panel Latch Handle Broken This bulletin involves replacing the cargo compartment load floor panel latch handle. The customer may describe a broken cargo compartment load floor panel latch handle.
Associated Products (4)Associated Documents - March 31, 2015•Document ID: 10144868Service Bulletin/Repair InstructionsENGINE
- Mfr Comm. #:
- 07-002-15 REV. A
- Date Added:
- September 24, 2018
- Manufacturer:
- CHRYSLER
SummaryIdler Pulley Noise During Cold Start This bulletin involves replacing the idler pulley. The customer may describe a loud high frequency noise that happens within 20 seconds of engine startup and lasts about 90 seconds intermittently during a cold engine start, approximately 0 degrees C (32 degrees F) and below.
Associated Products (32)2015 Jeep Cherokee2014 Chrysler 2002014 Chrysler 3002014 Dodge Challenger2014 Dodge Charger2014 Dodge Durango2014 Dodge Journey2014 Jeep Cherokee2014 Jeep Grand Cherokee2014 Ram 15002013 Chrysler 2002013 Chrysler 3002013 Dodge Challenger2013 Dodge Charger2013 Dodge Durango2013 Dodge Journey2013 Jeep Grand Cherokee2013 Ram 15002012 Chrysler 2002012 Chrysler 300+ 12 moreAssociated Documents - March 14, 2015•Document ID: 10144840Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; FUEL SYSTEM, GASOLINE; POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM); ENGINE AND ENGINE COOLING:EXHAUST SYSTEM
- Mfr Comm. #:
- 18-023-15
- Date Added:
- September 24, 2018
- Manufacturer:
- JEEP
SummaryFlash: 3.0 L MIL Illumination Diagnostic and System Improvements This bulletin involves reprogramming the Powertrain Control Module (PCM) with the latest available software. A small number of customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the Technician may find one or more of the following Diagnostic Trouble Code(s) may have been set: ? P20C2 - Reductant Heater 3 Control Circuit Performance. ? P204F - Reductant System Performance. ? P20E9 - Reductant Pressure Too High. ? P0087-00 - Fuel Rail Pressure Too Low. ? P20EE-00 - SCR NOX Catalyst Efficiency Below Threshold Bank 1. ? P0171-00 - System Too Lean (Bank 1). ? P0172-00 - System Too Rich (Bank 1). ? P225C-00 - NOX Sensor Performance - Signal Stuck High Bank 1 Sensor 1. ? P225D-00 - NOX Sensor 1/1 Performance - Signal Stuck Low. ? P1288-00 - NOX Sensor 1/2 Zero Offset Too High. ? P1289-00 - NOX Sensor 1/2 Zero Offset Too Low. ? P1296-00 - EGR Slow Response - Increasing Flow. ? P1297-00 - EGR Slow Response - Decreasing Flow. ? P2BA9-00 - NOX Exceedence - Insufficient Reagent Quality. ? P2080-00 - Exhaust Gas Temperature Sensor Circuit Performance. ? P2084-00 - Exhaust Gas Temperature Sensor Circuit Performance-Bank 1 Sensor 2. ? P0426-00 - Catalyst Temperature Sensor Circuit Performance Bank 1 Sensor 1. ? P242B-00 - Exhaust Gas Temperature Sensor Circuit Performance-Bank 1 Sensor 3. ? P062B-00 - Internal Control Module Fuel Injector Control Circuit Performance. ? P0088-00 - Fuel Rail Pressure Too High. ? P016F-00 - Closed Loop fuel Pressure Control At Limit - Pressure Too Low. ? P009A-00 - Intake Air Temperature / Ambient Air Temperature Correlation. ? P0234-00 - Turbocharger Overboost Condition. ? P0420-00 - Catalyst Efficiency (Bank 1). ? P050E-00 - Cold Start Engine Exhaust Temperature Too Low. ? P05F8-00 - Reductant Heater Control Module Performance. ? P061B-00 - Internal Control Module Torque Calculation
Associated Products (1)Associated Documents - March 11, 2015•Document ID: 10144834Service Bulletin/Repair InstructionsTIRES:PRESSURE MONITORING AND REGULATING SYSTEMS
- Mfr Comm. #:
- 08-024-15
- Date Added:
- September 24, 2018
- Manufacturer:
- JEEP
SummaryFlash: Service Tire Pressure System Message This bulletin involves updating the Tire Pressure Module (TPM) software and performing a Misc-function routine. The customer may notice a message ?Service Tire Pressure System? displayed on the cluster. On further inspection the technician may find the following Diagnostic Trouble Codes (DTCs): ? C151D - Tire Pressure Sensor Location Undetermined. ? C1581 - Front/Rear Side Tire Pressure Sensor Location Undetermined.
Associated Products (8)Associated Documents - March 11, 2015•Document ID: 10057925Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:SOFTWARE
- Mfr Comm. #:
- 08-024-15
- Date Added:
- July 14, 2015
- Manufacturer:
- DODGE
SummaryCHRYSLER 2014-2015 DODGE JOURNEY, DURANGO, CHARGER, JEEP CHEROKEE: CUSTOMERS MAY NOTICE A DISPLAYED MESSAGE ON THE INSTRUMENT CLUSTER "SERVICE TIRE PRESSURE SYSTEM". *LJ
Associated Products (5)Associated Documents - February 28, 2015•Document ID: 10229211Service Bulletin/Repair InstructionsPOWER TRAIN; ELECTRICAL SYSTEM
- Mfr Comm. #:
- 2101215
- Date Added:
- January 9, 2023
- Manufacturer:
- JEEP
SummaryFlash: Transmission Shift Enhancements This bulletin involves reprogramming the Transmission Control Module (TCM) with the latest available software. ? ECO mode will not retain settings. If ECO mode is turned off, it will turn back on after the ignition is cycled.
Associated Products (1)Associated Documents - February 28, 2015•Document ID: 10223632Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; POWER TRAIN
- Mfr Comm. #:
- 2101215
- Date Added:
- October 17, 2022
- Manufacturer:
- JEEP
SummaryFlash: Transmission Shift Enhancements This bulletin involves reprogramming the Transmission Control Module (TCM) with the latest available software. ? ECO mode will not retain settings. If ECO mode is turned off, it will turn back on after the ignition is cycled.
Associated Products (1)Associated Documents - February 28, 2015•Document ID: 10221545Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; EQUIPMENT; POWER TRAIN; BACK OVER PREVENTION
- Mfr Comm. #:
- 21-012-15
- Date Added:
- September 26, 2022
- Manufacturer:
- JEEP
SummaryFlash: Transmission Shift Enhancements This bulletin involves reprogramming the Transmission Control Module (TCM) with the latest available software. ? ECO mode will not retain settings. If ECO mode is turned off, it will turn back on after the ignition is cycled. ? 3-2, 2-1 Shift bump on deceleration. ? Less than desired shift quality during hard acceleration. ? Excessive shifts during cruise control operation. ? Intermittent delay shift condition. ? Less than desired engine braking during downhill descent. ? Manual gear selection improvements at higher altitudes. ? Less than desired driveability performance in 4 low. ? Hesitation improvements. ? Inconsistent and/or harsh 1-2, 2-3, 3-4, 4-5 upshifts at moderate throttle. ? Inconsistent and/or harsh lift-foot upshifts. ? Inconsistent and/or harsh coasting 3-2, 2-1 downshifts in Hi or Lo range. ? Ratio fault detection during 1-2 upshift or 8-7 downshift. ? Grade hunting (repeated shifting while ascending a grade). ? 8-7-8 shift busyness when approaching max vehicle speed. ? Undesired gear selection at high altitude. ? Undesired gear selection when driving downhill (not enough powertrain braking). ? Time to exit TIP (manual/paddle shift mode) takes too long. ? Unintended downshifts driving at certain speeds. ? 4-3 coasting downshift may cause excessive engine noise during engine braking. ? Shift hanging when vehicle is started cold. ? Undesired shift toggling in Manual/Paddle Shift mode. ? Lo range selec-speed control 1-2 shift busyness.
Associated Products (1)Associated Documents - February 28, 2015•Document ID: 10144905Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; EQUIPMENT; POWER TRAIN
- Mfr Comm. #:
- 21-012-15
- Date Added:
- September 24, 2018
- Manufacturer:
- JEEP
SummaryFlash: Transmission Shift Enhancements This bulletin involves reprogramming the Transmission Control Module (TCM) with the latest available software. ? ECO mode will not retain settings. If ECO mode is turned off, it will turn back on after the ignition is cycled. ? 3-2, 2-1 Shift bump on deceleration. ? Less than desired shift quality during hard acceleration. ? Excessive shifts during cruise control operation. ? Intermittent delay shift condition. ? Less than desired engine braking during downhill descent. ? Manual gear selection improvements at higher altitudes. ? Less than desired driveability performance in 4 low. ? Hesitation improvements. ? Inconsistent and/or harsh 1-2, 2-3, 3-4, 4-5 upshifts at moderate throttle. ? Inconsistent and/or harsh lift-foot upshifts. ? Inconsistent and/or harsh coasting 3-2, 2-1 downshifts in Hi or Lo range. ? Ratio fault detection during 1-2 upshift or 8-7 downshift. ? Grade hunting (repeated shifting while ascending a grade). ? 8-7-8 shift busyness when approaching max vehicle speed. ? Undesired gear selection at high altitude. ? Undesired gear selection when driving downhill (not enough powertrain braking). ? Time to exit TIP (manual/paddle shift mode) takes too long. ? Unintended downshifts driving at certain speeds. ? 4-3 coasting downshift may cause excessive engine noise during engine braking. ? Shift hanging when vehicle is started cold. ? Undesired shift toggling in Manual/Paddle Shift mode. ? Lo range selec-speed control 1-2 shift busyness.
Associated Products (1)Associated Documents - February 27, 2015•Document ID: 10229207Service Bulletin/Repair InstructionsFUEL SYSTEM, DIESEL; FUEL SYSTEM, GASOLINE
- Mfr Comm. #:
- 2400115
- Date Added:
- January 9, 2023
- Manufacturer:
- JEEP
SummarySlight Diesel Odor In The Vehicle This bulletin involves replacing the existing paper cabin filter with an updated charcoal filter. Customers may experience a slight diesel odor inside the vehicle.
Associated Products (1)Associated Documents