Jeep Gladiator Complaints (2021)

292 consumer complaints on file.

#11447473January 14, 2022
ENGINE, FUEL/PROPULSION SYSTEM
The vehicle’s throttle bounces and surges off idle, in direct opposition to the driver’s inputs to the controls. After the driver lifts off the accelerator and engages the clutch, the RPMs drop slowly to idle, then the throttle regularly bounces and surges without user input to the controls by ~500 to ~1,500 RPMs. The issue occurs while driving in every gear and or in neutral. The issue occurs frequently but not every time. The issue occurs with or without the driver’s foot on the brake. The failure to maintain idle malfunction was reproduced and confirmed by multiple service personnel at the local dealership. However, the Service Director falsified and backdated the service records to claim that they “couldn’t duplicate concern” and that the “vehicle is driving normal.” The throttle spike off idle was recreated by 4 independent mechanic shops and documented as a safety concern. An FCA TA claimed that the vehicle was “operating as designed“ both when he could not recreate the issue and when he could recreate the issue. Both of these statements cannot be correct and factual as they directly contradict each other. The throttle bounce and spike off idle substantially impairs the vehicle’s use as it impacts normal driving operations such as shifting, accelerating, and braking. The throttle bounce off idle creates as serious safety hazard as it causes the driver to delay or miss shifts in heavy traffic and divert attention from the road to the instrument cluster. The issue also creates a serious safety hazard as it induces driver confusion by making them think they accidentally pressed the accelerator while shifting. The claims of “operating as designed” indicates that the Jeep Gladiator Engineering Design Team designed a vehicle to spike the throttle without driver inputs to the controls. The vehicle is available for inspection upon request.
Crash:
No
Fire:
No
Injuries:
0
Deaths:
0
#11447467January 14, 2022
ENGINE, VEHICLE SPEED CONTROL
The vehicle’s throttle spikes / surges when the driver completely lifts off the accelerator and presses in the clutch. The issue indicates the throttle sticks after the driver lifts off the accelerator. The issue happens in multiple gears at various RPMs. The issue happens with or without the climate controls off. The issue regularly occurs in 4th gear at 44 mph at ~1900 RPMs. On 1/26/2021 while on a ride along, the customer and Service Tech at Texan DCJR were able to recreate the issue multiple times. On 1/29/2021, the Service Director at Texan DCJR stated to the customer that he and 3 members of his team were able to recreate the issue multiple times. However, the Service Director falsified and backdated the service records to 1/28/2021 claiming that they “couldn’t duplicate concern” and that the “vehicle is driving normal.” After two inspections, the FCA TA claimed that he “couldn’t duplicate concern”, the “vehicle is driving normal”, and that the vehicle was “operating as designed”. Then on 9/17/2021, the FCA TA was able to recreate the issue multiple times, but the FCA TA continued to state that the vehicle was “operating as designed“. The FCA TA contradictory claims the vehicle was “operating as designed” both when he could not recreate the issue and when he could recreate the issue. This throttle surge issue substantially impairs the vehicle’s use as it impacts shifting gears and normal driving operation. The issue occurs sporadically which surprises and distracts the driver creating a serious safety hazard as attention is diverted from the road to the instrument cluster. The issue also creates a serious safety hazard as it induces driver confusion by making them think they accidentally pressed the accelerator while shifting. The claims of “operating as designed” indicates that the Jeep Gladiator Engineering Design Team designed a vehicle to spike the throttle without driver inputs to the controls. The vehicle is available for inspection upon request.
Crash:
No
Fire:
No
Injuries:
0
Deaths:
0
#11447462January 14, 2022
ENGINE, FUEL/PROPULSION SYSTEM
The vehicle randomly stalled out / died while idling, with the clutch pedal fully engaged. This poses a serious safety hazard as the vehicle may unexpected stall out at a traffic light or while driving resulting in a serious accident. The most likely risk is a stalled out vehicle in heavy traffic resulting in a rear end collision. The vehicle stall out and failure to maintain idle malfunction was reported to the local dealership and an FCA Technical Advisor (TA). The vehicle’s stall out was witnessed and documented by an independent mechanic. However, the dealership and FCA TA continue to state that the vehicle is “operating as designed” and that “this is normal characteristic of the vehicle”. These claims indicate that the Jeep Gladiator Engineering Design Team intentionally designed the vehicle to stall out with the driver completely pressing in the clutch pedal. The vehicle is available for inspection upon request.
Crash:
No
Fire:
No
Injuries:
0
Deaths:
0
#11447111January 11, 2022
STEERING
When at highway speeds, hit a bump in the road and it causes a "death wobble".
Crash:
No
Fire:
No
Injuries:
0
Deaths:
0
#11447066January 11, 2022
VEHICLE SPEED CONTROL, ENGINE
The vehicle fails to maintain idle. During normal driving conditions the idle spikes significantly and noticeable from 200 – 2,000 RPMs. The throttle surges unpredictably without driver input to the controls. The failure of the vehicle to maintain idle creates a serious safety hazard as it distracts the driver’s attention and substantially impairs the vehicle’s use during routine driving tasks. The failure to maintain idle malfunction was reproduced and confirmed by multiple service personnel at the local dealership. However, the Service Director falsified and backdated the service records to claim that they “couldn’t duplicate concern” and that the “vehicle is driving normal.” An FCA TA stated that, “There are certain scenarios where the engine's idle speed may increase normally without accelerator input, this would include A/C operation or alternator charging requirements, however the difference in rpm is very slight and most people do not notice it and it will not cause the vehicle to gain or lose speed.” However, the malfunction occurs with a fully charged battery and the climate controls off, and it is highly noticeable. The FCA TA stated that the vehicle was “operating as designed” when he could not recreate the failure to maintain idle malfunction. However, the same FCA TA stated the vehicle was “operating as designed” after he was able to recreate the failure to maintain idle. Both of these statements cannot be factually correct as they directly contradict. Four independent mechanic shops evaluated the vehicle and were able to recreate the failure to maintain idle. A new Service Director and a Service Manager at another dealership both recreated / observed the failure to maintain idle and said that it was not right. However, after inspecting the vehicle again the FCA TA stated that “this is normal characteristic of the vehicle”, implicating Jeep Gladiator Engineering Design Team. The vehicle is available for inspection upon request.
Crash:
No
Fire:
No
Injuries:
0
Deaths:
0
#11446763January 9, 2022
STEERING
At highway speeds this vehicle wanders constantly. Keeping it in lane is more than a full time job. Windy conditions and or vehicle passing is a white knuckle experience . Looking at any of the jeep gladiator forums, this condition is a continuing condition / concern.
Crash:
No
Fire:
No
Injuries:
0
Deaths:
0
#11446585January 7, 2022
SUSPENSION
Experienced death wobble-violent shaking of steering wheel and car side to side -on highway on 1/6/2022. It happened twice, 5 mins from my home. Both incidents occurred in expressway. Once while traveling 70mph and had to swiftly change two lanes in rush hour traffic to the slow lane. The shaking stopped stop at reduced speed to 50. Then the second time minutes later I was going 57mph in the slow lane and the violent shaking started again. Luckily it was at my homes exit. I slowed down and drove the 4 blocks on the streets straight to my garage. Called Jeep next morning and they can’t pick it up until Wednesday, January 12. Bought this truck brand new from Jeep in May 2021. When I test drove it, steering pulled to one side. Had it aligned as part of the purchase. Months later I had steering problems and took it to them and they changed the track bar. A few weeks ago I did an oil change with them and they rotated the tires. And now I got the death wobble twice yesterday. There’s something in the suspension that’s either broken, loose, or worn out. I don’t feel safe.
Crash:
No
Fire:
No
Injuries:
0
Deaths:
0
#11446548January 6, 2022
STEERING
Multiple incidences of death wobble at higher speeds... Primarily on interstate after going over minor defects in road... overpass, etc... Getting more frequent.. requires slowing way down to 40 mph to correct.
Crash:
No
Fire:
No
Injuries:
0
Deaths:
0
#11445052December 27, 2021
SERVICE BRAKES, ENGINE
There is a failure of the vehicle’s Brake Throttle Override (BTO) system which poses a serious safety hazard. When braking the throttle will surge from ~500 to ~1,500 RPMs without driver input (foot completely off the accelerator pedal, clutch pedal pressed in, and applying brake pedal). Despite the driver’s foot firmly engaging the brake pedal, the vehicle sends rogue commands to the throttle to surge in the direction opposition to the driver’s inputs and intentions. The BTO malfunction creates a serious safety hazard as it impacts stopping distance. It also causes driver distraction / confusion causing them to second guess that they accidentally brushed the accelerator, which could lead to a serious accident. There is a significant risk that the vehicle’s BTO system may not prevent an unintended acceleration (UA) event leading to severe injury or death. For driver safety, the BTO system should be fully operational and the throttle should not spike while braking. The BTO malfunction was reproduced and confirmed by multiple service personnel at the local dealership. However, the Service Director falsified and backdated the service records to claim that they “couldn’t duplicate concern” and that the “vehicle is driving normal.” An FCA Technical Advisor (TA) inspected the vehicle, and he stated that “the brake pedal should always take precedence over the accelerator”. The FCA TA stated that the vehicle was “operating as designed” when he could not recreate the issue. However, the same FCA TA stated the vehicle was “operating as designed” after he was able to recreate the throttle surge while braking multiple times. Both of these statements cannot be factually correct as they directly contradict. The FCA TA claims that vehicle is “operating as designed” indicating that the Jeep Engineering Team violated the BTO standard governing the safe operation of a motor vehicle when designing the Gladiator. The vehicle is available for inspection upon request.
Crash:
No
Fire:
No
Injuries:
0
Deaths:
0
#11444891December 24, 2021
ENGINE, POWER TRAIN, VEHICLE SPEED CONTROL
The vehicle operates in direction violation of the Code of Federal Regulations (CFR): 49 CFR 571 Standard No. 124 outlining the Federal Motor Vehicle Safety Standards governing the operation of the Accelerator Control Systems. The “standard establishes requirements for the return of a vehicle's throttle to the idle position when the driver removes the actuating force from the accelerator control.” 571.124 Section 5.1 requires that “there shall be at least two sources of energy capable of returning the throttle to the idle position within the time limit specified by S5.3 from any accelerator position or speed whenever the driver removes the opposing actuating force.” 571.124 Section 5.3 requires that the “maximum time to return to idle position shall be 1 second.” After testing, the average return to idle time is 5.2 seconds, indicating the failure of a dual-redundant fail safe. The excessive delay in the return to idle is due to frequent but unpredictable throttle spikes that occur without input to the controls as the driver’s foot is completely off the accelerator. These unexpected / unwanted throttle surges vary from ~200 to ~1,500 RPMs. The excessive delay in the return to idle poses a significant safety risk to the driver and others. The throttle malfunction was reproduced and confirmed by 4 personnel at the local dealership, including the Service Technician, Shop Foreman, Service Manager, and Service Director. However, the Service Director falsified and backdated the service records to claim that they “couldn’t duplicate concern” and that the “vehicle is driving normal.” An FCA Technical Advisor (TA) inspected the vehicle, and he recreated the failure to return to idle within 1 second. However, the FCA TA claims that vehicle is “operating as designed” indicating that the Jeep Engineering Team violated this Federal Regulation governing the safe operation of a motor vehicle when designing the Gladiator. The vehicle is available for inspection upon request.
Crash:
No
Fire:
No
Injuries:
0
Deaths:
0
#11444177December 17, 2021
POWER TRAIN, SUSPENSION
Right rear axle seal leak causing oil to go onto brake pads Oil leak from shock absorber reservoir
Crash:
No
Fire:
No
Injuries:
0
Deaths:
0
#11444115December 17, 2021
STEERING
From when I picked up the new vehicle from the dealership there's been excessive "play" in the steering wheel. The vehicle drifts in its lane, requiring constant corrections. Issue is more pronounced on a highway versus city driving.
Crash:
No
Fire:
No
Injuries:
0
Deaths:
0
#11444090December 17, 2021
VEHICLE SPEED CONTROL, FORWARD COLLISION AVOIDANCE: ADAPTIVE CRUISE CONTROL
While ACC deactivated but not turned off (in "cancelled state", where you can resume with a button), I was at a Drive-Thru ordering my food, when I finished ordering I slowly lift my foot of the brake then suddenly the car lunged forward as if it was going to catch up to set cruise control speed, fortunately I braked immediately otherwise I could have crashed into the car in front of me. Another incident happened on my driveway, I stopped on my driveway to open the garage door, when I lifted my foot of the brake, the car lunged forward. (Same as before, ACC deactivated but not turned off). It is very scary and worrisome, I am worried that it will happen again and I won't be so lucky then.
Crash:
No
Fire:
No
Injuries:
0
Deaths:
0
#11443968December 16, 2021
SERVICE BRAKES, POWER TRAIN
Right rear axle leaking possibly causing brake contamination and unexpected decrease in braking
Crash:
No
Fire:
No
Injuries:
0
Deaths:
0
#11442235December 1, 2021
SERVICE BRAKES, WHEELS
Axle has leaked for a second time. No notification. Grease starts to seep out of the right rear passenger side onto the brake rotor and wheel. Fixed at 6800 miles. Happening again at 8500. Was without the truck for a month the first time. There is no warning when this happens.
Crash:
No
Fire:
No
Injuries:
0
Deaths:
0
#11441851November 28, 2021
EXTERIOR LIGHTING, LANE DEPARTURE: BLIND SPOT DETECTION, ELECTRICAL SYSTEM
I bought a new 2021 Jeep Gladiator at Larry H Dealer in Albuquerque NM , after a month and haft more or less I took the car for second time to the Dealer the car was there for 80 days because mirrors, blind spot asist not working , door conector dint click correctly , etc, Dealer told me after 80 days I have to pick up the car unfinish until part will arrive saying the car was safe to drive but battery could drain , never mentioning what could be the reason , a few days after I notice the wiper turning on randomly , the hight beams no working properly and the car having issues with the start. I when to the Dealer with big concern about could be something releared with the computer because they worked on it already and they told me no way could be the cumputer issues .A weeks after I took the car to the Dealer and in a week they fixed the problems without gave me a report about what they did , almost the same that happen in my 80 days before . Verbally at the Dealer they say was somting with the computer but that all what I got from them so far . NHTSA the reason Im filling this is because you can check the safety of the car when are new or even when they are been on the road for a while but Dealer doing what they are not supost to do bring accident to Our Cummunity as wells , We should stop those bad practices before become tragery . Thank You
Crash:
No
Fire:
No
Injuries:
0
Deaths:
0
#11441705November 26, 2021
UNKNOWN OR OTHER
Accelerating while driving three times last time almost most cause accident I took it to Koons dealership in Tyson corner on 12/26/2021 advisor was greg Jackson it wasn’t happening while I was there so nothing was done….
Crash:
No
Fire:
No
Injuries:
0
Deaths:
0
#11441296November 22, 2021
STEERING
Multiple incidents of violent death wobble at higher rates of speed between 60 and 75 mph. Vehicle must be rapidly brought to below 35 mph before it settles down. Seems to happen most often on the highway when going over and overpass where the seam between the road and the bridge is. Especially happens when the transition strip is diagonal to the path of travel. Vehicle has been at the dealership twice, first for sloppy and loose steering which they said they were unable to verify, that everything seemed fine. And most recently for the incidents of death wobble. Again the dealership claims they cannot replicate the issue. We feel the vehicle is unsafe to drive and will not pick it up until Chrysler has resolved the issue
Crash:
No
Fire:
No
Injuries:
0
Deaths:
0
#11440707November 16, 2021
STEERING, SUSPENSION, POWER TRAIN
Rear Axle Assembly leaking fluid onto rear brake drum and wheel hub assembly, potentially rendering brakes non-functional in rear of vehicle. Excessive drift/play in steering at moderate speeds (40mph+) "Death Wobble" experienced at speeds ~70mph. Front wheels/suspension near total loss of control. Steering column violently shuddering, and required excessive force to control. Vehicle is dealer stock, completely unmodified, with only 9500 miles on it. Dealer currently has vehicle. Replaced rear axle assembly. Currently test driving to try and reproduce shaking in steering and front drivetrain.
Crash:
No
Fire:
No
Injuries:
0
Deaths:
0
#11440390November 14, 2021
STEERING, SUSPENSION, UNKNOWN OR OTHER
8000 miles on new purchase, never off road, this Jeep goes into a violent shimmy/wobble 60-70 when in an ever so slight off of center steering angle on the freeway after crossing an expansion joint or other sharp road irregularity. Coasting down is the only way it goes away. Full Throttle acceleration out doesn't help, nor hard braking. It's NOT consistent, but it's happened to me three times in recent weeks as the summer temperatures subsided from the 80's F into the fall 40-60 F. Again, purchased brand new May 2021, tire pressures are proper, only driver, no other passengers or cargo. The onset is unexpected and frightening. The local Dodge / Jeep dealer where I have had one oil change seems to be unaware of a fleet issue or problem. It seems to be widely reported on various automotive blogs. Please help. [XXX] INFORMATION Redacted PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6).
Crash:
No
Fire:
No
Injuries:
0
Deaths:
0

← Back to Jeep Gladiator