Ford Bronco Service Bulletins (2021)
324 manufacturer communications on file.
- September 30, 2021•Document ID: 10201909Service Bulletin/Repair InstructionsSTRUCTURE:BODY; UNKNOWN OR OTHER
- Mfr Comm. #:
- 21B49
- Date Added:
- October 5, 2021
- Manufacturer:
- FORD
SummaryCertain 2021 Model Year Bronco Vehicles Equipped with a Hard Top Roof Roof Panel Delamination; In all of the affected vehicles, the exposed or unsealed edges on the molded in color hard top roof may cause an unsatisfactory appearance when exposed to extreme water and humidity. This concern is strictly an appearance issue as the function of the roof is uncompromised.
Associated Products (1)Associated Documents - September 24, 2021•Document ID: 10201602Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; EQUIPMENT; EQUIPMENT ADAPTIVE/MOBILITY
- Mfr Comm. #:
- SSM 50149
- Date Added:
- September 28, 2021
- Manufacturer:
- FORD
SummarySome 2021 Bronco vehicles equipped with front and rear parking aid sensors may set diagnostic trouble codes (DTCs) for all 8 parking aid sensors and/or circuits. This may be due to the software within the parking aid module (PAM). To correct the condition, reprogram the PAM using the latest software level of the appropriate Ford diagnostic scan tool. For claiming, use causal part 15K866 and applicable labor operations in Section 10 of the Service Labor Time Standards (SLTS) Manual. After PAM programing check for DTCs and correct as necessary.
Associated Products (1)Associated Documents - September 24, 2021•Document ID: 10201601Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; EQUIPMENT ADAPTIVE/MOBILITY; EQUIPMENT
- Mfr Comm. #:
- SSM 50148
- Date Added:
- September 28, 2021
- Manufacturer:
- FORD
SummarySome 2021 Bronco vehicles may experience multiple warning indicators / messages displayed in the instrument panel cluster (IPC) and/or multiple communication fault diagnostic trouble codes (DTC) setting in and/or related to the HS2-CAN modules. This may be due to a loose and/or improperly seated connector C210. If the vehicle exhibits the above conditions, access and inspect connector C210 for proper attachment and/or damage and repair as necessary. To access the connector, remove the right side lower cowl side panel (follow Workshop Manual, (WSM) Section 415-00 > Removal and Installation > A-Pillar Speaker, Steps 9-10) and the glove compartment (follow WSM Section 501-12 > Removal and Installation > Glove Compartment). If this fault persists, refer to WSM Section 418-00A and continue with normal diagnostics.
Associated Products (1)Associated Documents - September 13, 2021•Document ID: 10201624Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; AIR BAGS:SENSOR:SIDE IMPACT
- Mfr Comm. #:
- TSB 21-2297
- Date Added:
- September 30, 2021
- Manufacturer:
- FORD
SummarySome 2020-2021 Explorer/Aviator and 2021 Bronco vehicles may exhibit an illuminated airbag warning indicator with diagnostic trouble code (DTC) B1404:13 and/or B1407:13. This may be due to contamination and relative movement in the connection between the wiring harness and the side airbag. To correct the condition, follow the Service Procedure steps to replace the affected connector with a service pigtail and the affected side airbag.
Associated Products (5)Associated Documents - September 3, 2021•Document ID: 10201578Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- SSM 50084
- Date Added:
- September 28, 2021
- Manufacturer:
- FORD
SummarySome 2021 Bronco 5 door models equipped with a hard top roof configuration may exhibit poor Sirius XM satellite radio reception and or signal loss in rural areas with dense foliage, tall buildings, or other similar obstructions. No additional diagnosis or service is required for this condition at this time. Inform customers that they can continue to drive the vehicle and engineering is currently working on a solution to improve this condition that is expected to be available for service in January 2022. In addition, if the vehicle is equipped with the optional factory roof rails and crossbars this may further degrade the reception. Removing the roof rails and crossbars may improve reception performance. Monitor OASIS for additional information and schedule a service appointment with the customer once the repair becomes available.
Associated Products (1)Associated Documents - August 31, 2021•Document ID: 10201065Service Bulletin/Repair InstructionsSTRUCTURE
- Mfr Comm. #:
- TSB 21-2285
- Date Added:
- September 4, 2021
- Manufacturer:
- FORD
SummarySome 2021 Bronco vehicles equipped with a hard top may exhibit a loose and/or sagging headliner. This may be due to the factory installation process. To correct the condition, follow the Service Procedure to re-adhere the headliner.
Associated Products (1)Associated Documents - August 25, 2021•Document ID: 10201034Service Bulletin/Repair InstructionsSERVICE BRAKES, ELECTRIC:SOFTWARE/PROGRAMMING
- Mfr Comm. #:
- SSM 50064
- Date Added:
- September 4, 2021
- Manufacturer:
- LINCOLN
SummarySome 2013-2021 Ford and Lincoln vehicles may exhibit noise when the brakes are applied. When diagnosing and repairing brake noise conditions, use the Workshop Manual (WSM) and the appropriate pinpoint test in section 206-00. The brake rotors should only be machined if directed by the WSM because one or more of the following conditions are present on the braking surface: scoring, excessive corrosion/rust or pitting, bluing/discoloration and/or heat spots. For additional information, refer to WSM section 206-00.
Associated Products (100)2021 Ford Bronco2021 Ford Bronco Sport2021 Ford Edge2021 Ford Escape2021 Ford Expedition2021 Ford Explorer2021 Ford F-1502021 Ford F-2502021 Ford F-3502021 Ford F-4502021 Ford F-5502021 Ford Mustang2021 Ford Mustang Mach-E2021 Lincoln Aviator2021 Lincoln Corsair2021 Lincoln Nautilus2021 Lincoln Navigator2020 Ford Edge2020 Ford Escape2020 Ford Expedition+ 80 moreAssociated Documents - August 25, 2021•Document ID: 10201025Service Bulletin/Repair InstructionsEQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC.
- Mfr Comm. #:
- SSM 50065
- Date Added:
- September 4, 2021
- Manufacturer:
- FORD
SummarySome 2021 Bronco 5 door models equipped with a hard top roof configuration may exhibit poor Sirius XM satellite radio reception and or signal loss in rural areas with dense foliage, tall buildings, or other similar obstructions. No additional diagnosis or service is required for this condition at this time. Inform customers that they can continue to drive the vehicle and engineering is currently working on a solution for this condition that is expected to be available for service in January 2022. In addition, if the vehicle is equipped with the optional factory roof rails and crossbars this may further degrade the reception. Removing the roof rails and crossbars may improve reception performance. Monitor OASIS for additional information and schedule a service appointment with the customer once the repair becomes available.
Associated Products (1)Associated Documents - August 17, 2021•Document ID: 10201015Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- SSM 50045
- Date Added:
- September 4, 2021
- Manufacturer:
- FORD
SummarySome 2018-2021 Ford/Lincoln vehicles equipped with a wireless charging pad may exhibit an inoperative charging pad, slow charging, a notification that the phone has been mispositioned on the charging pad and/or the phone charging icon in the center screen is not showing. This may be due to the customer's phone if they are using an iPhone 12. Vehicles equipped with a wireless charging pad are designed to charge best with phones that follow the Qi standard. The iPhone 12 hardware currently does not follow the Qi standard for wireless charging. This may make it difficult for Ford and Lincoln vehicles to wirelessly charge this specific phone. The phone can still be charged using the USB cable if the vehicle experiences the above symptoms. If the customer is using an iPhone 12, verify the wireless charging pad works with a Qi certified phone prior to any part replacements.
Associated Products (41)2021 Ford Bronco2021 Ford Bronco Sport2021 Ford Edge2021 Ford Escape2021 Ford Expedition2021 Ford Explorer2021 Ford F-1502021 Ford F-2502021 Ford F-3502021 Ford F-4502021 Ford F-5502021 Ford Mustang Mach-E2021 Ford Transit Connect2021 Lincoln Aviator2021 Lincoln Corsair2021 Lincoln Nautilus2021 Lincoln Navigator2020 Ford Edge2020 Ford Escape2020 Ford Expedition+ 21 moreAssociated Documents - August 12, 2021•Document ID: 10201082Service Bulletin/Repair InstructionsSTRUCTURE; EQUIPMENT
- Mfr Comm. #:
- 21B49
- Date Added:
- September 5, 2021
- Manufacturer:
- FORD
SummaryIn all of the affected vehicles, a quality concern on the molded-in color hard top roof was identified during our quality inspections. This concern is strictly an appearance issue as the function of the roof is uncompromised. The exposed or unsealed hard top edges may cause unsatisfactory appearance when exposed to extreme water and humidity.
Associated Products (1)Associated Documents - August 12, 2021•Document ID: 10200902Service Bulletin/Repair InstructionsBACK OVER PREVENTION; ELECTRICAL SYSTEM
- Mfr Comm. #:
- OTA SU1-Bronco
- Date Added:
- September 4, 2021
- Manufacturer:
- FORD
SummarySoftware Update 1 (SU1) for 2021 Model Year Bronco vehicles is now available. Involves: Zone Lighting Battery Drain, Remote Start Battery Drain, Contrast improvements to analog rear view camera
Associated Products (1)Associated Documents - August 10, 2021•Document ID: 10200997Service Bulletin/Repair InstructionsVISIBILITY:REARVIEW MIRRORS/DEVICES; VISIBILITY
- Mfr Comm. #:
- SSM 50029
- Date Added:
- September 4, 2021
- Manufacturer:
- FORD
SummarySome 2021 Broncos equipped with the Base, Big Bend, Black Diamond and/or Badlands trim levels may exhibit a whistle noise coming from the drivers side mirror area of the vehicle. This may be due to an excessive gap between the exterior mirror cover and the glass housing. This condition does not affect vehicle durability and no additional diagnosis or service is required for this condition at this time. Inform customers that they can continue to drive the vehicle and engineering is currently working on a solution for this condition that is expected in October 2021. Replacement of the mirror and/or mirror cover will not resolve this condition. Monitor OASIS for additional information and schedule service appointments for customers once the repair becomes available.
Associated Products (1)Associated Documents - August 10, 2021•Document ID: 10200741Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- TSB 21-2262
- Date Added:
- September 2, 2021
- Manufacturer:
- FORD
SummarySome 2021 Bronco vehicles equipped with a 2.3L engine may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble codes (DTCs) P0300, P0301, P0302, P0303 And/Or P0304. These DTCs may be caused by the powertrain control module (PCM) configuration related to the fuel injector operation. To correct the condition, follow the Service Procedure to reprogram the PCM.
Associated Products (1)Associated Documents - August 4, 2021•Document ID: 10200991Service Bulletin/Repair InstructionsVISIBILITY; VISIBILITY:GLASS, SIDE/REAR
- Mfr Comm. #:
- SSM 50005
- Date Added:
- September 4, 2021
- Manufacturer:
- FORD
SummarySome 2021 Bronco vehicles may exhibit a side door window that gets hung up on the upper door weatherstrip when opening the door causing resistance to opening. This may be due to an incorrect alignment of the side door and/or window. To correct this condition, ensure no damage exists to the door, latch or related components and make necessary repairs before continuing. If concern persists, perform the Up/Down, Fore/Aft Adjustment (steps 1-15), refer to Workshop Manual (WSM), Section 501-11, Front/Rear Door Window Glass Adjustment Procedure. If the concern has not been resolved, perform Pinpoint Test K located in Section 501-11 of the WSM.
Associated Products (1)Associated Documents - August 4, 2021•Document ID: 10200986Service Bulletin/Repair InstructionsSTRUCTURE:BODY:DOOR; STRUCTURE
- Mfr Comm. #:
- SSM 50003
- Date Added:
- September 4, 2021
- Manufacturer:
- FORD
SummarySome 2021 Bronco vehicles may exhibit a creak/pop type noise when any of the side doors are opened and closed. This may be due to incorrect door installation, alignment and/or incorrect tightening of the two bolts which hold the door to the vehicle body. To correct this condition, inspect for and address any damage to the door and/or latch components, then remove and reinstall the suspect door following the instructions located in the Digital Owners Manual, Removable Vehicle Components > Removable Doors > Removing and Installing the Doors. In this section you ll also find a detailed tutorial video of the process. If the noise persists, perform the Front/Rear Door Alignment procedure located in the Workshop Manual (WSM), Section 501-03 Body Closures.
Associated Products (1)Associated Documents - August 2, 2021•Document ID: 10200737Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:WIRING:POWER DISTRIBUTION MODULE/IPDM
- Mfr Comm. #:
- TSB 21-2251
- Date Added:
- September 2, 2021
- Manufacturer:
- FORD
SummarySome 2021 Bronco vehicles built on or before 09-Jul-2021 may exhibit an intermittent No Key Detected message displayed in the instrument cluster followed by a double horn chirp immediately after starting the vehicle. This may be due to a software parameter in the driver door module (DDM) and/or the passenger door module (PDM). To correct the condition, follow the Service Procedure to reprogram the DDM and PDM.
Associated Products (1)Associated Documents - July 26, 2021•Document ID: 10199513Service Bulletin/Repair InstructionsSTRUCTURE:BODY:HOOD:HINGE AND ATTACHMENTS:SUPPORT DEVICE/STRUT; ELECTRICAL SYSTEM:WIRING:FRONT UNDERHOOD
- Mfr Comm. #:
- SSM 49979
- Date Added:
- August 2, 2021
- Manufacturer:
- FORD
SummarySome 2021 Bronco vehicles equipped with Big Bend and Outer Bank trim levels may exhibit a whistle noise originating from the front of the hood area when traveling at speeds above 30 mph (50 Km/h). If the whistle noise can be eliminated by taping off the gap between the hood and grill opening, this condition may be due to the hood seal design. Hood seal replacement will not resolve this condition. Inform customers that they can continue to drive the vehicle and Ford is currently working to release an improved seal design that will be available in October 2021. Follow up with the customer to schedule an appointment once OASIS confirms part availability.
Associated Products (1)Associated Documents - July 1, 2021•Document ID: 10199500Service Bulletin/Repair InstructionsPOWER TRAIN:MANUAL TRANSMISSION:INTERNAL:DOGS/SYNCHROS; ELECTRICAL SYSTEM
- Mfr Comm. #:
- SSM 49928
- Date Added:
- August 2, 2021
- Manufacturer:
- FORD
SummarySome 2021 Mustang Mach-E, F-150, Edge/Nautilus or Bronco vehicles equipped with SYNC 4 may have a customer symptom of the SYNC voice commands being activated without pushing the steering wheel switch. This may be due to the feature called Wake Word within SYNC 4. This feature allows the driver to activate the SYNC 4 system without pushing the steering wheel switch. Under the touchscreen Settings > Voice Settings the preferred Wake Word can be changed. The feature can also be disabled if the customer does not want the SYNC voice commands being activated without touching the steering wheel switch. This feature is not a defect. Do not submit a claim for this condition.
Associated Products (5)Associated Documents - July 1, 2021•Document ID: 10199498Service Bulletin/Repair InstructionsEXTERIOR LIGHTING
- Mfr Comm. #:
- SSM 49925
- Date Added:
- August 2, 2021
- Manufacturer:
- FORD
SummarySome 2021 Bronco vehicles equipped with exterior zone lighting may experience an intermittent single hazard lamp flash when hazards are off. This condition is due to the body control module (BCM) software. This condition occurs when zone lighting is activated then deactivated while the engine is OFF, or during an engine auto-start-stop event. This condition may be temporarily suppressed by activating then deactivating the zone lighting feature while the engine is running. Module replacement will not resolve this condition. Ford is currently working on a software update that is expected to be available October 2021. The customer can continue to drive the vehicle and schedule a follow-up appointment for October, when repairs are expected to become available. Follow up with the customer to confirm the appointment once OASIS confirms software availability.
Associated Products (1)Associated Documents - July 1, 2021•Document ID: 10199494Service Bulletin/Repair InstructionsEQUIPMENT; ELECTRICAL SYSTEM; PARKING BRAKE:ELECTRICAL
- Mfr Comm. #:
- SSM 49920
- Date Added:
- August 2, 2021
- Manufacturer:
- FORD
SummarySome 2021 Bronco vehicles equipped with front and rear parking aid sensors may set diagnostic trouble codes (DTCs) for all 8 parking aid sensors/circuits if 2 or more rear parking aid sensors/circuits have a concern. This is due to the software within the parking aid module (PAM), and module replacement will not resolve this condition. If the PAM sets DTCs for all 8 parking aid sensors/circuits, diagnose the rear parking aid sensor and circuit DTCs first. Reference Workshop Manual (WSM), Section 413-13A for parking aid diagnostic information. Ford is currently working on a software update that is expected to be available August 2021. The customer can continue to drive the vehicle and schedule a follow-up appointment for October, when software is expected to be available. Follow up with the customer to confirm the appointment once OASIS confirms software availability.
Associated Products (1)Associated Documents