CAN-AM Spyder Service Bulletins (2013)
80 manufacturer communications on file.
- November 12, 2014•Document ID: 10118139Service Bulletin/Repair InstructionsPOWER TRAIN:CLUTCH ASSEMBLY
- Mfr Comm. #:
- Article 68498
- Date Added:
- September 27, 2017
- Manufacturer:
- CAN-AM
SummaryTechnical Service Tip (TST) related to clutch engagement which could chatter or shutter.
Associated Products (1)Associated Documents - September 13, 2014•Document ID: 10118140Service Bulletin/Repair InstructionsPOWER TRAIN:CLUTCH ASSEMBLY
- Mfr Comm. #:
- Posting SE5 Clut
- Date Added:
- September 27, 2017
- Manufacturer:
- CAN-AM
SummaryThis older dealer posting regarding SE5 clutch chatter at take off will now have a reference to the revised version of Article 68498.
Associated Products (1)Associated Documents - September 12, 2014•Document ID: 10088485Service Bulletin/Repair InstructionsENGINE; EQUIPMENT
- Mfr Comm. #:
- ARTICLE 87480
- Date Added:
- January 12, 2017
- Manufacturer:
- CAN-AM
SummaryTECHNICAL SERVICE TIP (TST):INSTRUCTION TO BE FOLLOWED IF A CUSTOMER COMPLAINS OF EXCESSIVE HEAT FELT ON THE LATERAL PANELS IN CERTAIN RIDING CONDITIONS. THE SOLUTION IS TO MAKE SURE THE UNIT HAS THE 2013-9 WARRANTY CAMPAIGN ECM UPDATE PERFORM PRIOR TO THE INSTALLATION OF THESE PANEL AND THE INSTALLATION THE AIR SCOOP PANEL KIT.
Associated Products (1)Associated Documents - September 12, 2014•Document ID: 10056676Service Bulletin/Repair InstructionsEQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
- Mfr Comm. #:
- TST-000087
- Date Added:
- January 31, 2015
- Manufacturer:
- CAN-AM
SummaryBRP MC: IN CERTAIN RIDING CONDITION, EXCESSIVE HEAT IS FELT ON LATERAL PANELS. MODEL 2013 RS/ST. *PE
Associated Products (1)Associated Documents - August 26, 2014•Document ID: 10057375Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:SOFTWARE
- Mfr Comm. #:
- 000034361
- Date Added:
- May 22, 2015
- Manufacturer:
- CAN-AM
SummaryBRP ROADSTER : COMPLAINTS REGARDING INTERMITTENT DPS ASSISTANCE OR NO ASSISTANCE AT ALL. *LJ
Associated Products (1)Associated Documents - August 18, 2014•Document ID: 10056027Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:12V/24V/48V BATTERY
- Mfr Comm. #:
- BRP-51492
- Date Added:
- August 18, 2014
- Manufacturer:
- CAN-AM
SummaryBRP MC: WHEN BRAKE PEDAL IS RESTING ON HUMP STOP, THE BRAKE LIGHT REMAINS ON, CAUSING DRAINAGE TO THE BATTERY. MODEL 2013 ROADSTER. *PE
Associated Products (1)Associated Documents - June 4, 2014•Document ID: 10084725Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- BULLETIN 2014-3
- Date Added:
- November 23, 2016
- Manufacturer:
- CAN-AM
SummaryWARRANTY PAC BULLETIN 2014-3 ADDRESSING A POSSIBLE LIMP HOME MODE TRIGGERED BY CB WHILE TRANSMITTING DUE TO INCORRECTLY SHIELDED CAN WIRES IN ENTERTAINMENT AND CB HARNESS. BRP SUGGEST TO RETURN ALL AFFECTED KITS IF IN DEALER'S INVENTORY OR REPLACE ENTERTAINMENT HARNESS AND CB COMMUNICATION KIT IF IT IS INSTALLED ON VEHICLES AND ONLY ON VEHICLES THAT EXPERIENCE THE PROBLEM.
Associated Products (2)Associated Documents - April 12, 2014•Document ID: 10186274Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- D109338
- Date Added:
- February 1, 2021
- Manufacturer:
- CAN-AM
SummaryTrailer module may fail.
Associated Products (13)Associated Documents - April 9, 2014•Document ID: 10084702Service Bulletin/Repair InstructionsEXTERIOR LIGHTING:BRAKE LIGHTS
- Mfr Comm. #:
- ARTICLE 51492
- Date Added:
- November 23, 2016
- Manufacturer:
- CAN-AM
SummaryTECHNICAL SERVICE TIP (TST): BRP HAS RECEIVED REPORTS CONCERNING THE BRAKE LIGHT STAYING LIT WHEN THE BRAKE PEDAL IS RESTING ON THE BUMP STOP. THIS WILL CAUSE BATTERY DRAINAGE. THERE ARE 2 REASONS THE BRAKE LIGHT SWITCH MAY NOT OPERATE CORRECTLY.THE BRAKE LIGHT SWITCH SUPPORT PLATE IS WARPED OR THE BRAKE LIGHT SWITCH PLUNGER IS DIRTY AND STICKING. THIS REQUIRES THE REPLACEMENT OF THE BRAKE LIGHT SWITCH AND POSSIBLY THE SUPPORT PLATE DEPENDING ON THE PRODUCTION DATE OF THE UNIT.
Associated Products (1)Associated Documents - April 9, 2014•Document ID: 10055108Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:WIRING:FUSES AND CIRCUIT BREAKERS; ELECTRICAL SYSTEM:SOFTWARE; EQUIPMENT ADAPTIVE/MOBILITY; ENGINE
- Mfr Comm. #:
- SB-2013-0015
- Date Added:
- April 10, 2014
- Manufacturer:
- CAN-AM
SummaryBRP: FRONT FUSE BOXES SEAL ALLOWS WATER TO INFILTRATE; WHEN ENGINE HAS STARTED CAN CAUSE CODE P1614 TO BE TRIGGERED AND HOME LIMP MODE; THE BELT GUARD RETAINING SCREWS ARE NOT SECURED PROPERLY. *PE
Associated Products (2)Associated Documents - April 1, 2014•Document ID: 10084722Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING:ENGINE:GASOLINE:BELTS AND ASSOCIATED PULLEYS; ELECTRICAL SYSTEM:SOFTWARE; ELECTRICAL SYSTEM:WIRING:FUSES AND CIRCUIT BREAKERS
- Mfr Comm. #:
- BULLETIN 2013-9
- Date Added:
- November 23, 2016
- Manufacturer:
- CAN-AM
SummaryREVISON 1 OF WARRANTY BULLETIN 2013-9 ADRESSING 3 PROBLEMS: A) SEAL THE FRONT FUSE BOXES BECAUSE WATER MAY INFILTRATE EITHER OF THE FRONT FUSE BOXES; B) UPDATE ECM SOFTWARE BECAUSE CODE P1614 MAY BE TRIGGERED AND CAUSE A LIMP HOME MODE WHEN STARTING THE ENGINE; C) REPLACE UPPER BELT GUARD RETAINING SCREWS THAT MAY NOT SECURE THE BELT GUARD PROPERLY.
Associated Products (1)Associated Documents - April 1, 2014•Document ID: 10055104Service Bulletin/Repair InstructionsUNKNOWN OR OTHER
- Mfr Comm. #:
- SB-2013-9
- Date Added:
- April 10, 2014
- Manufacturer:
- CAN-AM
SummaryBRP: ON SOME MOTORCYCLES, THE UPPER BELT GUARDS ARE FALLING OFF DUE TO THE TORX SCREWS BEING SHORT AND NOT ABLE TO REACH NYLON OF NUT. *PE UPDATE SEAL FRONT FUSE BOX & ECM SOFTWARE. 8/18/14. *PE
Associated Products (1)Associated Documents - February 21, 2014•Document ID: 10055098Service Bulletin/Repair InstructionsEQUIPMENT
- Mfr Comm. #:
- SE-5
- Date Added:
- April 9, 2014
- Manufacturer:
- CAN-AM
SummaryBRP MC: WHEN ENGINE IS AT OPERATING TEMPERATURE AND HAS DIFFICULTY OR FAILS TO SHIFT AT ALL, THE OIL PRESSURE REGULATOR ASSEMBLY NEEDS CHECKING OR THE STEEL SLEEVE IS NOT PRESSED IN. MODEL 2013 SE5. *PE
Associated Products (1)Associated Documents - January 31, 2014•Document ID: 10055287Service Bulletin/Repair InstructionsPOWER TRAIN:CLUTCH ASSEMBLY
- Mfr Comm. #:
- BRP-2013-9
- Date Added:
- May 5, 2014
- Manufacturer:
- CAN-AM
SummaryBRP MOTORCYCLE: INFORMATION ON WARRANTY CAMPAIGN REGARDING A POSSIBLE REPAIR ISSUE OF OIL LEAK ON CLUTCH COVER AND SEALING PROCEDURE, ON SOME MOTORCYCLES. MODEL 2014 SPYDER RT SE6. *PE
Associated Products (1)Associated Documents - January 30, 2014•Document ID: 10185880Service Bulletin/Repair InstructionsEQUIPMENT ADAPTIVE/MOBILITY; EQUIPMENT; ENGINE AND ENGINE COOLING
- Mfr Comm. #:
- A2013-ST
- Date Added:
- January 25, 2021
- Manufacturer:
- CAN-AM
SummaryUpper belt guard falling off.
Associated Products (1)Associated Documents - January 23, 2014•Document ID: 10185876Service Bulletin/Repair InstructionsEQUIPMENT; EQUIPMENT ADAPTIVE/MOBILITY; ELECTRICAL SYSTEM
- Mfr Comm. #:
- B2013-9
- Date Added:
- January 25, 2021
- Manufacturer:
- CAN-AM
SummarySeal the front fuse boxes. Update ECM software. Replace upper belt guard retaining screws.
Associated Products (1)Associated Documents - January 23, 2014•Document ID: 10055286Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:WIRING:FUSES AND CIRCUIT BREAKERS; STRUCTURE:FRAME AND MEMBERS; ELECTRICAL SYSTEM:SOFTWARE
- Mfr Comm. #:
- WC-2013-9
- Date Added:
- May 5, 2014
- Manufacturer:
- CAN-AM
SummaryCAN-AM MOTORCYCLE: WARRANTY CAMPAIGN INFORMATION REGARDING SEAL OF FRONT FUSE BOXES (WATER INFILTRATING EITHER OF FRONT FUSE BOXES), UPDATING ECM SOFTWARE (A LIMP HOME MODE MAY BE TRIGGERED WHEN ENGINE HAS STARTED, REPLACE UPPER BELT GUARD RETAINING SCREWS (THE BELT GUARD NOT SECURED PROPERLY BY RETAINING SCREWS. MODEL 2013 SPYDER. *PE
Associated Products (1)Associated Documents - January 23, 2014•Document ID: 10055106Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:SOFTWARE; ELECTRICAL SYSTEM:WIRING:FUSES AND CIRCUIT BREAKERS
- Mfr Comm. #:
- SB-2014-0001
- Date Added:
- April 10, 2014
- Manufacturer:
- CAN-AM
SummaryBRP: ON SOME MOTORCYCLES, NEED TO HAVE THE FRONT FUSE BOX COVERS REPLACED WITH AN IMPROVED COVER IN PRODUCTION AND ALSO, UPDATE ECM SOFTWARE (P1614, HI TEMP LAMPS, LIMP HOME MODE). *PE
Associated Products (2)Associated Documents - December 23, 2013•Document ID: 10124114Service Bulletin/Repair InstructionsFUEL SYSTEM, OTHER
- Mfr Comm. #:
- Posting 12-23
- Date Added:
- November 17, 2017
- Manufacturer:
- CAN-AM
SummaryPosting informing the community that a solution has been found for issue regarding the cluster fuel level indicator. B.U.D.S. Has an update for this model and a bulletin will be released in a near future.
Associated Products (1)Associated Documents - October 25, 2013•Document ID: 10129605Service Bulletin/Repair InstructionsSTRUCTURE:BODY:HOOD
- Mfr Comm. #:
- Article 10-25(2)
- Date Added:
- March 5, 2018
- Manufacturer:
- CAN-AM
SummaryTechnical Service Tip (TST) informing dealers that BRP has noticed an increase in claims for the RT hood actuator switch. Switch inspection reveals the contact points inside the switch are exposed to high amperage. This causes an intermittent or permanently bad contact. The dealers are informed to inspect the hood actuator itself to see if the lever it pushes against is in-line and not obstructed. This could also happen if the front cargo is over packed and the pressure pressing up against the mechanism is beyond what the actuator can push and the switch gets too much amperage.
Associated Products (4)Associated Documents