BMW S 1000 RR Service Bulletins (2025)
6 manufacturer communications on file.
- February 11, 2026•Document ID: 11029028OtherELECTRICAL SYSTEM; EXTERIOR LIGHTING
- Mfr Comm. #:
- MCAS1726
- Date Added:
- February 25, 2026
- Manufacturer:
- BMW
SummaryReturn Combination Switch
Associated Products (14)Associated Documents - February 10, 2026•Document ID: 11028992Service CampaignEXTERIOR LIGHTING
- Mfr Comm. #:
- MCSTOP610032
- Date Added:
- February 24, 2026
- Manufacturer:
- BMW
SummaryAfter a quality inspection it was found that due to improper machining, the right-side chain tensioner screw plug doesn’t meet the specifications over the service life of the motorcycle. As a result, over increased mileage accrued noise and engine damage may occur.
Associated Products (1)Associated Documents - September 9, 2025•Document ID: 11024216Service Bulletin/Repair InstructionsWHEELS
- Mfr Comm. #:
- MC360125
- Date Added:
- October 10, 2025
- Manufacturer:
- BMW
SummaryWhen turning the wheel slowly, you might hear rattling noises from inside. Sometimes during manufacturing ,the core doesn't fully detach from the wheel. These core pieces can break off and rattle inside the wheel.
Associated Products (5)Associated Documents - August 25, 2025•Document ID: 11022847Service Bulletin/Repair InstructionsSUSPENSION
- Mfr Comm. #:
- MC330325
- Date Added:
- September 5, 2025
- Manufacturer:
- BMW
SummaryTraces of wear seem to be found on the needle bearing bush of the rear suspension strut. The ZnNi (zinc-nickel) corrosion protection coating can be worn in the area of the race for the needles of thebearing and does not constitute bearing bush wear.
Associated Products (6)Associated Documents - August 25, 2025•Document ID: 11022846Service Bulletin/Repair InstructionsSUSPENSION
- Mfr Comm. #:
- MC330225
- Date Added:
- September 5, 2025
- Manufacturer:
- BMW
SummaryCustomer complains when the bike parked and without the engine running; while compressing and lettingthe rear suspension rebound, there is a loud audible cracking or groaning noise. This is either due to low grease levels on the bearing positions or bearing position damage.
Associated Products (3)Associated Documents - April 22, 2025•Document ID: 11017291Service CampaignPOWER TRAIN
- Mfr Comm. #:
- MC110322
- Date Added:
- April 29, 2025
- Manufacturer:
- BMW
SummaryDuring the production of the intake camshaft there was a change in the coolant used to prevent localized overheating of parts of the camshaft. Because of this, certain parts of the camshaft may have a changed surface hardness that can result in increased wear of the rocker arms and camshaft over time.
Associated Products (1)Associated Documents