Audi S6 Service Bulletins (2012)
214 manufacturer communications on file.
- May 13, 2014•Document ID: 10249085Service Bulletin/Repair InstructionsUNKNOWN OR OTHER
- Mfr Comm. #:
- Update91i8
- Date Added:
- January 22, 2024
- Manufacturer:
- AUDI
SummaryGoogle Maps Street View (NVLW))
Associated Products (264)Associated Documents - May 2, 2014•Document ID: 10122472Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:SOFTWARE
- Mfr Comm. #:
- A641433 2029714-
- Date Added:
- November 8, 2017
- Manufacturer:
- AUDI
SummarySupersedes Technical Service Bulletin Group 64 number 12-22 dated July 5, 2012. After one or both of the front door control units (J386/J387) is replaced, one or both of the rear door control units (J3888/J389) cannot be coded or parameterized via an SVM specified vs. actual comparison (spec/actual). The parameter data in the software coding container has changed for the front and rear door control units. As a result, an SVM code is required to update the parameter data for any replacement control unit. Simply running an SVM spec/actual will not code nor update the parameter data in the new replacement control unit. A hardware change suggestion will be provided when an SVM spec/actual is executed. An additional hardware replacement is not required.
Associated Products (50)Associated Documents - April 17, 2014•Document ID: 10250982Service Bulletin/Repair InstructionsSTEERING
- Mfr Comm. #:
- 44144920225639
- Date Added:
- March 4, 2024
- Manufacturer:
- AUDI
SummarySteering wheel shimmy, vibration, and/or oscillation
Associated Products (128)Associated Documents - April 3, 2014•Document ID: 10216651Service Bulletin/Repair InstructionsBACK OVER PREVENTION:DISPLAY FUNCTION
- Mfr Comm. #:
- 144920284402
- Date Added:
- August 1, 2022
- Manufacturer:
- AUDI
SummaryThe customer complains of one or more of the following issues: ? When the vehicle is completely refueled, the vehicle range (?distance to empty?) that is displayed is different than the vehicle range that was displayed the last time the vehicle was completely refueled. ? The displayed vehicle range drops inconsistently. ? After the vehicle is refueled, the displayed vehicle range does not change for a long period of time. ? When the vehicle is driven on hilly roads for a long period of time, the displayed vehicle range suddenly changes by a significant amount. ? There are no DTCs related to fuel senders stored in the instrument cluster control module, J285 (address word 17). This condition does not involve or affect the accuracy of the fuel level indicator, but only the estimated distance to empty display on the on-board computer.
Associated Products (174)Associated Documents - April 3, 2014•Document ID: 10231131Service Bulletin/Repair InstructionsEQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
- Mfr Comm. #:
- Edition75
- Date Added:
- February 6, 2023
- Manufacturer:
- AUDI
SummaryTechnical bulletins and updates
Associated Products (166)Associated Documents - March 31, 2014•Document ID: 10231135Service Bulletin/Repair InstructionsEQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
- Mfr Comm. #:
- Edition79
- Date Added:
- February 6, 2023
- Manufacturer:
- AUDI
SummaryTechnical bulletins and updates
Associated Products (208)Associated Documents - March 31, 2014•Document ID: 10122295Service Bulletin/Repair InstructionsAIR BAGS:FRONTAL:SENSOR/CONTROL MODULE-INACTIVE; AIR BAGS
- Mfr Comm. #:
- A691428 2023323-
- Date Added:
- November 8, 2017
- Manufacturer:
- AUDI
SummarySupersedes Technical Service Bulletin Group 69 number 13-26 dated October 21, 2013. After the airbag control module (J234) has been replaced, the control unit cannot be coded via SVM spec/actual. An SVM code is required to code and parameterize the new service replacement airbag control module. Each model's SVM code is provided in a parts bulletin (GP bulletin), which should have been referenced through ETKA when the module was replaced. The control module cannot be coded until the SVM code has been executed. If the SVM code was not acquired through the GP bulletin in ETKA, follow the instructions in the Service section of this bulletin to update the control module.
Associated Products (97)Associated Documents - March 17, 2014•Document ID: 10231133Service Bulletin/Repair InstructionsEQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
- Mfr Comm. #:
- Edition77
- Date Added:
- February 6, 2023
- Manufacturer:
- AUDI
SummaryTechnical bulletins and updates
Associated Products (189)Associated Documents - February 20, 2014•Document ID: 10228292Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- 00145920297372
- Date Added:
- January 3, 2023
- Manufacturer:
- AUDI
SummaryWhen oil is drained through the drain plug, the oil might spill on components around the oil pan area. If it is not properly cleaned up, this spilled oil could drip after the procedure is complete, causing unnecessary customer complaints.
Associated Products (166)Associated Documents - February 20, 2014•Document ID: 10221944Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- 00145920297372
- Date Added:
- September 26, 2022
- Manufacturer:
- AUDI
SummaryWhen oil is drained through the drain plug, the oil might spill on components around the oil pan area. If it is not properly cleaned up, this spilled oil could drip after the procedure is complete, causing unnecessary customer complaints.
Associated Products (166)Associated Documents - January 23, 2014•Document ID: 10122206Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; EXTERIOR LIGHTING:BACK UP LIGHTS
- Mfr Comm. #:
- A941432 2017806-
- Date Added:
- November 8, 2017
- Manufacturer:
- AUDI
SummarySupersedes Technical Service Bulletin Group 94 number 13-19 dated May 23, 2013. The light bulb warning light is displayed in the instrument cluster with the ?Vehicle lights: malfunction? message. DTCs are stored in the vehicle electrical system control module. Exterior lights are functioning properly. If the headlight switch is moved to an intermediate position and remains there, the light bulb warning light and the error message appear after approximately ten seconds. Once displayed, the message turns off after approximately five seconds. The light bulb warning light turns off only after the headlight switch is turned to a defined position, and the status of DTC 03280 or DTC 01800 are changed to sporadic. After 40 driving cycles without an implausible signal detected, the DTCs are automatically cleared.
Associated Products (41)Associated Documents - January 20, 2014•Document ID: 10231122Service Bulletin/Repair InstructionsEQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
- Mfr Comm. #:
- Edition69
- Date Added:
- February 6, 2023
- Manufacturer:
- AUDI
SummaryTechnical bulletins and updates
Associated Products (165)Associated Documents - December 9, 2013•Document ID: 10251027Service Bulletin/Repair InstructionsWHEELS
- Mfr Comm. #:
- 44134620103345
- Date Added:
- March 4, 2024
- Manufacturer:
- AUDI
SummaryTightening wheel bolts
Associated Products (257)Associated Documents - December 3, 2013•Document ID: 10212669Service Bulletin/Repair InstructionsVEHICLE SPEED CONTROL:CRUISE CONTROL
- Mfr Comm. #:
- 27 13 20 2033524
- Date Added:
- May 31, 2022
- Manufacturer:
- AUDI
SummaryCruise control sporadically does not work, set button jams
Associated Products (18)Associated Documents - December 3, 2013•Document ID: 10210617Service Bulletin/Repair InstructionsPARKING BRAKE
- Mfr Comm. #:
- 27 13 20 2033524
- Date Added:
- May 2, 2022
- Manufacturer:
- AUDI
SummaryIncorrect tolerances of cruise control ?Set? button. Cruise control deactivates sporadically or cannot be activated. A new set speed cannot be saved. ?Set? button on cruise control stalk does not work.
Associated Products (18)Associated Documents - December 3, 2013•Document ID: 10121404Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- A271320 2033524-
- Date Added:
- October 31, 2017
- Manufacturer:
- AUDI
SummarySupersedes Technical Service Bulletin Group 27 number 13-17 dated April 5, 2013. Cruise control deactivates sporadically or cannot be activated. A new set speed cannot be saved. ?Set? button on cruise control stalk does not work. DTCs are present in the vehicle. Incorrect tolerances of cruise control ?Set? button.
Associated Products (20)Associated Documents - November 21, 2013•Document ID: 10251025Service Bulletin/Repair InstructionsSTEERING
- Mfr Comm. #:
- 44134420225638
- Date Added:
- March 4, 2024
- Manufacturer:
- AUDI
SummarySteering wheel shimmy, vibration and/or oscillation
Associated Products (144)Associated Documents - November 21, 2013•Document ID: 10204489Service Bulletin/Repair InstructionsSTEERING; SUSPENSION; TIRES; WHEELS
- Mfr Comm. #:
- 4413442022563 8
- Date Added:
- December 13, 2021
- Manufacturer:
- AUDI
SummaryCustomer feels vibration in the seat, vehicle floor, footwell, pedals, or steering wheel.
Associated Products (142)Associated Documents - November 6, 2013•Document ID: 10204503Service Bulletin/Repair InstructionsEQUIPMENT:ELECTRICAL
- Mfr Comm. #:
- 9113142013790 8
- Date Added:
- December 13, 2021
- Manufacturer:
- AUDI
SummaryThe navigation DVD or other CD/DVD cannot be ejected.
Associated Products (155)Associated Documents - November 4, 2013•Document ID: 10204514Service Bulletin/Repair InstructionsEQUIPMENT
- Mfr Comm. #:
- Audi Newsletter
- Date Added:
- December 13, 2021
- Manufacturer:
- AUDI
SummarySeveral weeks ago, the ODIS Quick Reference Guide was sent to all dealer technicians (non-corporate
Associated Products (143)Associated Documents