Audi Q7 Service Bulletins (2009)
700 manufacturer communications on file.
- July 8, 2013•Document ID: 10124505Service Bulletin/Repair InstructionsPARKING BRAKE; ELECTRICAL SYSTEM
- Mfr Comm. #:
- A461347 2034387-
- Date Added:
- December 5, 2017
- Manufacturer:
- AUDI
SummaryCustomer may report sporadically hearing the parking brake being actuated after the vehicle has been switched off. If the customer does not identify the sound as the sound of the parking brake being actuated, he or she may simply complain of hearing noises from the rear brakes. Ignition is switched off. Steering is locked. Park is selected. Parking brake is not engaged. If the electro-mechanical parking brake is not operated for some time, the free play between brake pads and brake discs increases because of normal brake pad wear. The parking brake control unit performs an automatic correction about every 621 miles (1,000 km). On A8 models, the brake pad thickness is also calculated.
Associated Products (125)Associated Documents - July 1, 2013•Document ID: 10243787Service Bulletin/Repair InstructionsEQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
- Mfr Comm. #:
- Edition42
- Date Added:
- October 10, 2023
- Manufacturer:
- AUDI
SummaryAudi Elsa Newsletter
Associated Products (282)Associated Documents - June 21, 2013•Document ID: 10228314Service Bulletin/Repair InstructionsFUEL SYSTEM, GASOLINE
- Mfr Comm. #:
- 01130920147538
- Date Added:
- January 3, 2023
- Manufacturer:
- AUDI
SummaryThe use of contaminated gasoline or gasoline with a low content of deposit control additives may result in one or more conditions.
Associated Products (247)Associated Documents - June 21, 2013•Document ID: 10224993Service Bulletin/Repair InstructionsFUEL SYSTEM, GASOLINE
- Mfr Comm. #:
- 01130920147538
- Date Added:
- October 31, 2022
- Manufacturer:
- AUDI
SummaryThe use of contaminated gasoline or gasoline with a low content of deposit control additives may result in one or more conditions.
Associated Products (247)Associated Documents - June 21, 2013•Document ID: 10221966Service Bulletin/Repair InstructionsFUEL SYSTEM, GASOLINE
- Mfr Comm. #:
- 01130920147538
- Date Added:
- September 26, 2022
- Manufacturer:
- AUDI
SummaryThe use of contaminated gasoline or gasoline with a low content of deposit control additives may result in one or more conditions.
Associated Products (247)Associated Documents - June 21, 2013•Document ID: 10123591Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; FUEL SYSTEM, GASOLINE
- Mfr Comm. #:
- A011309 2014753-
- Date Added:
- November 17, 2017
- Manufacturer:
- AUDI
SummarySupersedes Technical Service Bulletin Group 00 number 10-01 dated February 5, 2010. Excessive accumulation of deposits on intake valves, intake manifold, fuel injectors and combustion chambers. Engine runs rough after cold start. Excessive engine cranking time. Hesitations while driving. Rough engine idle. Reduced engine performance. Poor fuel economy. Conditions may be severe enough to illuminate the MIL in conjunction with storage of DTCs for misfire (example: P0300, P030x) and / or lean fuel system (example: P0171, P0174, P1128, P1130, P1136, P1138) in the engine control module (ECM). Condition may be caused by use of contaminated gasoline. Condition may be caused by use of gasoline with a low content of deposit control additives.
Associated Products (165)Associated Documents - June 20, 2013•Document ID: 10123587Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- A191341 2025303-
- Date Added:
- November 17, 2017
- Manufacturer:
- AUDI
SummarySupersedes Technical Service Bulletin Group 19 number 13-35 dated March 25, 2013. Discontinuation and mixing of Audi-approved engine coolants. G11, G12, and G12+ coolants have been replaced by an improved version. G12++ coolant (for service available) has been introduced in MY 2005 for all engines. G13 has been introduced in MY 2008 as factory filling and service.
Associated Products (168)Associated Documents - June 20, 2013•Document ID: 10123558Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- A961364 2029384-
- Date Added:
- November 17, 2017
- Manufacturer:
- AUDI
SummarySupersedes Technical Service Bulletin Group 96 number 12-32 dated April 27, 2012. The customer is able to program one or more of the Homelink buttons using their garage door remote, but after a few days or weeks, one or more of the programmed Homelink buttons no longer function. The LED on the Homelink button that is no longer functioning now flashes slowly, indicating that no programming is stored. The customer?s transmitter operates at 295Mhz. At the workshop, the Homelink system can be programmed to the workshop garage door successfully. No trouble is found. No DTCs are stored in any control units. The garage door opener control module, J530, was designed with an operational frequency range in which the 295Mhz frequency works correctly during the initial programming of the system. Over time, the transmitting frequency can drift out of range (especially in warmer climates), causing the system to lose its programming.
Associated Products (35)Associated Documents - June 10, 2013•Document ID: 10243793Service Bulletin/Repair InstructionsEQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
- Mfr Comm. #:
- Edition39
- Date Added:
- October 10, 2023
- Manufacturer:
- AUDI
SummaryAudi Elsa Newsletter
Associated Products (56)Associated Documents - June 3, 2013•Document ID: 10243792Service Bulletin/Repair InstructionsEQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
- Mfr Comm. #:
- Edition38
- Date Added:
- October 10, 2023
- Manufacturer:
- AUDI
SummaryAudi Elsa Newsletter
Associated Products (46)Associated Documents - May 29, 2013•Document ID: 10210650Service Bulletin/Repair InstructionsSERVICE BRAKES
- Mfr Comm. #:
- 37 13 07 2033658
- Date Added:
- May 2, 2022
- Manufacturer:
- AUDI
SummaryThis condition may be caused when the brake pedal and the accelerator pedal are depressed simultaneously. Drivers who consciously or unconsciously drive with their left foot resting on the brake pedal are prone to experience this condition. With the introduction of Electronic Power Control (EPC) (no accelerator cable) to fuel injection systems, an engine RPM control feature has been incorporated into the engine electronic control system software. As a result, application of the brake and accelerator pedals at the same time (brake pedal with left foot and accelerator pedal with right foot) results in the following: ? Brake pedal function (normal at all times) overrides any throttle application. ? Diagnostic Trouble Codes (DTCs) will not be stored. ? When the brake pedal is applied while the accelerator is depressed, engine RPMs will return to idle speeds of 1400 RPMs after approximately two seconds. ? When the accelerator is applied while the brake pedal is depressed, the vehicle accelerates slower than usual (reduced engine torque).
Associated Products (223)Associated Documents - May 29, 2013•Document ID: 10052307Service Bulletin/Repair InstructionsVEHICLE SPEED CONTROL
- Mfr Comm. #:
- 37-13-07
- Date Added:
- July 10, 2013
- Manufacturer:
- AUDI
SummaryAUDI: SOME VEHICLES MAY LACK POWER OR WILL NOT MOVE AFTER STOP DUE TO SIMULTANEOUSLY DEPRESSING THE BRAKE AND ACCELERATOR PEDALS. *JS
Associated Products (157)Associated Documents - May 22, 2013•Document ID: 10068707Service Bulletin/Repair InstructionsEXTERIOR LIGHTING
- Mfr Comm. #:
- 2033675/2
- Date Added:
- June 2, 2016
- Manufacturer:
- AUDI
SummarySUMMARY TO BE PROVIDED ON A FUTURE DATE.
Associated Products (14)Associated Documents - May 22, 2013•Document ID: 10052245Service Bulletin/Repair InstructionsEXTERIOR LIGHTING:TAIL LIGHTS:SWITCH
- Mfr Comm. #:
- TSB-94-13-16
- Date Added:
- July 1, 2013
- Manufacturer:
- AUDI
SummaryAUDI: ON SOME VEHICLES, THE SWITCH BETWEEN REAR LID TAIL LAMP AND BUMPER, DOES NOT SWITCH OVER WHEN LID IS IN OPERATION, DUE TO PADDLE, OF REAR SILL TRIM, NOT CONTACTING OPPOSING LID LATCH POINTS, UNIFORMLY. MODELS 2007-2014 Q7, 2009-2014 Q5. *PE UPDATED 07/10/2013 *JS
Associated Products (12)Associated Documents - May 20, 2013•Document ID: 10228305Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- 01130020302923
- Date Added:
- January 3, 2023
- Manufacturer:
- AUDI
SummaryMoisture ingress due to inadequate internal sealing of some differential pressure sensors (G505) causes electronic failure of the sensors. Part analysis shows that this condition only affects parts that were produced on or before March 29, 2011.
Associated Products (3)Associated Documents - May 20, 2013•Document ID: 10224984Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; POWER TRAIN
- Mfr Comm. #:
- 01130020302923
- Date Added:
- October 31, 2022
- Manufacturer:
- AUDI
SummaryMoisture ingress due to inadequate internal sealing of some differential pressure sensors (G505) causes electronic failure of the sensors. Part analysis shows that this condition only affects parts that were produced on or before March 29, 2011.
Associated Products (3)Associated Documents - May 20, 2013•Document ID: 10221957Service Bulletin/Repair InstructionsPOWER TRAIN
- Mfr Comm. #:
- 01130020302923
- Date Added:
- September 26, 2022
- Manufacturer:
- AUDI
SummaryMoisture ingress due to inadequate internal sealing of some differential pressure sensors (G505) causes electronic failure of the sensors. Part analysis shows that this condition only affects parts that were produced on or before March 29, 2011.
Associated Products (3)Associated Documents - May 20, 2013•Document ID: 10065349Service Bulletin/Repair InstructionsENGINE
- Mfr Comm. #:
- AA011300-3
- Date Added:
- May 13, 2016
- Manufacturer:
- AUDI
SummarySUMMARY TO BE PROVIDED ON A FUTURE DATE.
Associated Products (3)Associated Documents - May 20, 2013•Document ID: 10124943Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- A011300 2030292-
- Date Added:
- December 5, 2017
- Manufacturer:
- AUDI
SummarySupersedes Technical Service Bulletin Group 26 number 12-14 dated August 31, 2012. MIL on. DTCs is stored in the engine control module (ECM). Moisture ingress due to inadequate internal sealing of some differential pressure sensors (G505) causes electronic failure of the sensors. Part analysis shows that this condition only affects parts that were produced on or before March 29, 2011.
Associated Products (3)Associated Documents - May 14, 2013•Document ID: 10228289Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- 00134920335761
- Date Added:
- January 3, 2023
- Manufacturer:
- AUDI
SummaryAlthough the correct amount of oil was added to the engine during an oil change service, a check of the oil level shows that the oil level is not okay.
Associated Products (125)Associated Documents