Audi Q5 Service Bulletins (2013)
1,661 manufacturer communications on file.
- November 1, 2013•Document ID: 10250176Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:IGNITION
- Mfr Comm. #:
- Update28G6
- Date Added:
- February 12, 2024
- Manufacturer:
- AUDI
SummaryIgnition Coils
Associated Products (20)Associated Documents - November 1, 2013•Document ID: 10214978Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 28G6UPDATE
- Date Added:
- July 5, 2022
- Manufacturer:
- AUDI
SummaryUPDATE Ignition Coils.
Associated Products (12)Associated Documents - November 1, 2013•Document ID: 10204513Service Bulletin/Repair InstructionsEQUIPMENT:ELECTRICAL
- Mfr Comm. #:
- Upcoming Update
- Date Added:
- December 13, 2021
- Manufacturer:
- AUDI
SummaryUpcoming Update 28G6.
Associated Products (20)Associated Documents - November 1, 2013•Document ID: 10121521Service Bulletin/Repair InstructionsENGINE; ELECTRICAL SYSTEM:IGNITION
- Mfr Comm. #:
- Dealer Letter-Up
- Date Added:
- October 31, 2017
- Manufacturer:
- AUDI
SummaryThis communication is to inform you of upcoming Update 28G6. There are 79,232 Audi vehicles affected in the U.S. by this Update. Rough idle or reduced driving power and, in turn, an illuminated Malfunction Indicator Lamp (MIL) on the instrument cluster due to the presence of specific fault codes caused by this component. Inspect and replace ignition coils as required.
Associated Products (20)Associated Documents - November 1, 2013•Document ID: 10121479Service Bulletin/Repair InstructionsEQUIPMENT:ELECTRICAL
- Mfr Comm. #:
- Update Bulletin-
- Date Added:
- October 31, 2017
- Manufacturer:
- AUDI
SummaryRough idle or reduced driving power and, in turn, an illuminated Malfunction Indicator Lamp (MIL) on the instrument cluster due to the presence of specific fault codes caused by this component. This Update is in effect until removed. Procedure is valid only for vehicles that show the 28G6 code in the ElsaWeb Campaign/Action Information screen on the day of repair. Vehicle must be within the New Vehicle Limited Warranty. Procedure must be performed within the allotted time frame stated in this Technical Service Bulletin. Procedure must be performed on applicable vehicles in dealer inventory prior to sale. A faulty ignition coil can result in rough idling or reduced driving power and, in turn, cause the Malfunction Indicator Lamp (MIL) on the instrument cluster to illuminate due to the presence of specific fault codes caused by this component.
Associated Products (12)Associated Documents - October 30, 2013•Document ID: 10066995Service Bulletin/Repair InstructionsSTRUCTURE
- Mfr Comm. #:
- 2035626/1
- Date Added:
- May 23, 2016
- Manufacturer:
- AUDI
SummarySUMMARY TO BE PROVIDED ON A FUTURE DATE.
Associated Products (2)Associated Documents - October 30, 2013•Document ID: 10121315Service Bulletin/Repair InstructionsSTRUCTURE:BODY:DOOR
- Mfr Comm. #:
- A681312 2035626-
- Date Added:
- October 31, 2017
- Manufacturer:
- AUDI
SummaryCustomer may report hearing a buzzing or rattling noise from the driver side dash and/or door area when the vehicle is driven over bumpy roads. An improper bolt torque sequence at the knee bar support bracket can cause unwanted vibration.
Associated Products (2)Associated Documents - October 29, 2013•Document ID: 10121311Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- A571397 2022032-
- Date Added:
- October 31, 2017
- Manufacturer:
- AUDI
SummarySupersedes Technical Service Bulletin Group 57 number 13-92 dated August 1, 2013. The customer inquires about the operation of the vehicle locking, and may suggest that the vehicle ?locked itself?. The lock command history is stored in the convenience system control module (J393).
Associated Products (62)Associated Documents - October 28, 2013•Document ID: 10243776Service Bulletin/Repair InstructionsEQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
- Mfr Comm. #:
- Edition59
- Date Added:
- October 10, 2023
- Manufacturer:
- AUDI
SummaryAudi Elsa Newsletter
Associated Products (23)Associated Documents - October 23, 2013•Document ID: 10121987Service Bulletin/Repair InstructionsENGINE; EQUIPMENT; EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
- Mfr Comm. #:
- Reference-Oil Ca
- Date Added:
- November 3, 2017
- Manufacturer:
- AUDI
SummaryThis document contains the Audi oil capacity chart.
Associated Products (103)Associated Documents - October 22, 2013•Document ID: 10216646Service Bulletin/Repair InstructionsEQUIPMENT; BACK OVER PREVENTION
- Mfr Comm. #:
- 134420354631
- Date Added:
- August 1, 2022
- Manufacturer:
- AUDI
SummaryIn order to provide effective lubrication and cooling of internal engine components, all internal combustion engines consume a certain amount of engine oil. Oil consumption varies from engine to engine, and may change significantly over the life of the engine. Typically, engines with specified break-in periods consume more oil during the break-in period, and the oil consumption will stabilize after the break-in period. Refer to the Owner?s Manual for specific break-in procedures. Under normal conditions, the rate of oil consumption depends on the quality and viscosity of the oil, the RPM at which the engine is operated, and the ambient temperature and road conditions. Additional factors include the amount of oil dilution from water condensation or fuel residue and the oxidation level of the oil. Utilizing the advanced sensor technology integrated in models equipped with the 3.0 TFSI engine, it is possible to measure oil consumption electronically via a Guided Function test plan.
Associated Products (14)Associated Documents - October 22, 2013•Document ID: 10122046Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; ELECTRICAL SYSTEM:SOFTWARE
- Mfr Comm. #:
- Update Bulletin
- Date Added:
- November 3, 2017
- Manufacturer:
- AUDI
SummaryUnder certain conditions, permanent mode $0A DTC codes concerning the fuel pump power stage module may remain visible after the vehicle?s OBD system has run the proper monitors successfully to allow the DTC to be erased by the system, after a proper repair. This software malfunction may cause vehicle to not pass IM inspection programs. This software update eliminates specific permanent DTC codes stored in mode $0A of the ECM. All other DTC storage functions remain unaffected. This Update is in effect until removed. Procedure is valid only for vehicles that show the 24AD code in the ElsaWeb Campaign/Action Information screen on the day of repair. Vehicle must be within the Federal Emissions Warranty. Procedure must be performed within the allotted time frame stated in this Technical Service Bulletin. Procedure must be performed on applicable vehicles in dealer inventory prior to sale.
Associated Products (15)Associated Documents - October 22, 2013•Document ID: 10121302Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- A171344 2035463-
- Date Added:
- October 31, 2017
- Manufacturer:
- AUDI
SummaryIn order to provide effective lubrication and cooling of internal engine components, all internal combustion engines consume a certain amount of engine oil. Oil consumption varies from engine to engine, and may change significantly over the life of the engine. Typically, engines with specified break-in periods consume more oil during the break-in period, and the oil consumption will stabilize after the break-in period. Refer to the Owner?s Manual for specific break-in procedures. Under normal conditions, the rate of oil consumption depends on the quality and viscosity of the oil, the RPM at which the engine is operated, and the ambient temperature and road conditions. Additional factors include the amount of oil dilution from water condensation or fuel residue and the oxidation level of the oil. Utilizing the advanced sensor technology integrated in models equipped with the 3.0 TFSI engine, it is possible to measure oil consumption electronically via a Guided Function test plan. If the electronic oil consumption test is not available for this model, perform the test with the conventional scale/oil weighing method. See TSB 2018550 for instructions for the conventional scale/oil weighing method.
Associated Products (14)Associated Documents - October 21, 2013•Document ID: 10072123Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:SOFTWARE
- Mfr Comm. #:
- 10212013
- Date Added:
- June 17, 2016
- Manufacturer:
- AUDI
SummarySUMMARY TO BE PROVIDED ON A FUTURE DATE.
Associated Products (8)Associated Documents - October 21, 2013•Document ID: 10068111Service Bulletin/Repair InstructionsSEATS
- Mfr Comm. #:
- 2030729/4
- Date Added:
- May 23, 2016
- Manufacturer:
- AUDI
SummarySUMMARY TO BE PROVIDED ON A FUTURE DATE.
Associated Products (5)Associated Documents - October 21, 2013•Document ID: 10249076Service Bulletin/Repair InstructionsUNKNOWN OR OTHER; ENGINE AND ENGINE COOLING:ENGINE:ENGINE CONTROL MODULE (ECU/ECM):SOFTWARE
- Mfr Comm. #:
- Update24AD
- Date Added:
- January 22, 2024
- Manufacturer:
- AUDI
SummaryECM Software Update
Associated Products (10)Associated Documents - October 21, 2013•Document ID: 10243775Service Bulletin/Repair InstructionsEQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
- Mfr Comm. #:
- Edition58
- Date Added:
- October 10, 2023
- Manufacturer:
- AUDI
SummaryAudi Elsa Newsletter
Associated Products (198)Associated Documents - October 21, 2013•Document ID: 10121961Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:SOFTWARE; ELECTRICAL SYSTEM
- Mfr Comm. #:
- Dealer Letter -
- Date Added:
- November 3, 2017
- Manufacturer:
- AUDI
SummaryThis communication is to inform you of upcoming Update 24AD. Under certain conditions, permanent mode $0A DTC codes concerning the fuel pump power stage module may remain visible after the vehicle?s OBD system has run the proper monitors successfully to allow the DTC to be erased by the system, after a proper repair. This software malfunction may cause vehicle to not pass IM inspection programs. This software update eliminates specific permanent DTC codes stored in mode $0A of the ECM. All other DTC storage functions remain unaffected. Update the ECM software to latest levels via SVM.
Associated Products (10)Associated Documents - October 21, 2013•Document ID: 10121947Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING; EQUIPMENT:APPLIANCE:AIR CONDITIONER
- Mfr Comm. #:
- A871346 2035582-
- Date Added:
- November 3, 2017
- Manufacturer:
- AUDI
SummaryThe A/C Compressor has been diagnosed as faulty and will be replaced under warranty. When performing replacement of an A/C Compressor under warranty, the amount of refrigerant and oil recovered must be documented.
Associated Products (79)Associated Documents - October 21, 2013•Document ID: 10121944Service Bulletin/Repair InstructionsSEATS
- Mfr Comm. #:
- 721312 2030729-4
- Date Added:
- November 3, 2017
- Manufacturer:
- AUDI
SummarySupersedes Technical Service Bulletin Group 72 number 13-05 dated September 5, 2013. Customer may report hearing squeak or rattle sounds coming from the rear seat area. The rattle sound may be caused from the pivot point of the torsion bar within the 2/3 rear seat backrest pivot assembly. The squeak noise may be coming from the rear seat armrest area, specifically from the contact surface between the armrest lock and the striker pin.
Associated Products (5)Associated Documents