Audi Q5 Service Bulletins (2014)
1,411 manufacturer communications on file.
- August 5, 2015•Document ID: 10128404Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- A201547 2041594-
- Date Added:
- February 5, 2018
- Manufacturer:
- AUDI
SummaryThe MIL is on. DTC P046100 (Fuel level sensor, circuit range/performance) is stored in the engine control module (ECM), J623 (address word 01).
Associated Products (18)Associated Documents - August 5, 2015•Document ID: 10074501Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; ENGINE
- Mfr Comm. #:
- 2041594/1
- Date Added:
- June 22, 2016
- Manufacturer:
- AUDI
SummarySUMMARY TO BE PROVIDED ON A FUTURE DATE.
Associated Products (18)Associated Documents - August 4, 2015•Document ID: 10128405Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; ENGINE AND ENGINE COOLING:ENGINE:GASOLINE:TURBO/SUPERCHARGER
- Mfr Comm. #:
- A211522 2039006-
- Date Added:
- February 5, 2018
- Manufacturer:
- AUDI
SummarySupersedes Technical Service Bulletin Group 21 number 14-21 dated November 26, 2014. The MIL is on. Customer may report a reduction in power. DTC P029900 (Turbo/Super Charger Underboost) is stored in the engine control module (ECM), J623 (address word 01). The circlip connecting the turbo wastegate actuator rod and the wastegate flap lever can fall off due to low tension of the clip. Consequently, the wastegate linkage becomes disconnected, causing MIL on and DTC P029900.
Associated Products (10)Associated Documents - August 4, 2015•Document ID: 10128400Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- A011538 2041566-
- Date Added:
- February 5, 2018
- Manufacturer:
- AUDI
SummaryDTC P103200 (NOx sensor signal too high) is stored in the engine control module (ECM). Various parts have been replaced under warranty for the condition noted above, but no issues were identified with these parts.
Associated Products (11)Associated Documents - July 31, 2015•Document ID: 10128456Service Bulletin/Repair InstructionsVEHICLE SPEED CONTROL:CRUISE CONTROL
- Mfr Comm. #:
- A9115082033313-3
- Date Added:
- February 5, 2018
- Manufacturer:
- AUDI
SummarySupersedes Technical Service Bulletin Group 91 number 14-46 dated June 25, 2014. Adaptive Cruise Control (ACC) does not work. The message "ACC no sensor vision" appears in the cluster. DTCs are logged in the distance regulation control module.
Associated Products (12)Associated Documents - July 31, 2015•Document ID: 10058588Service Bulletin/Repair InstructionsFORWARD COLLISION AVOIDANCE: ADAPTIVE CRUISE CONTROL
- Mfr Comm. #:
- TSB-91-15-08
- Date Added:
- October 16, 2015
- Manufacturer:
- AUDI
SummaryAUDI: SOME VEHICLES EXPERIENCE A DEACTIVATION OF ADAPTED CRUISE CONTROL (ACC) DUE RADAR SENSOR FAILING TO SEE OBJECTS FOR PERIOD OF TIME WHEN SNOW, LEAVES, WATER SPRAY BLOCKS RADAR SENSOR VISION. MODEL 2013-16 A4, A5, CABRIOLET, Q5. *PE
Associated Products (9)Associated Documents - July 30, 2015•Document ID: 10130705Service Bulletin/Repair InstructionsSTEERING
- Mfr Comm. #:
- A481566 2034351-
- Date Added:
- April 2, 2018
- Manufacturer:
- AUDI
SummarySupersedes Technical Service Bulletin Group 48 number 15-65 dated March 23, 2015. Customer may report hearing creaking or squeaking noise from the steering column when steering slowly (the noise can be duplicated while the vehicle is stationary if the steering wheel is turned slowly). The noise may get louder at higher temperatures or when the vehicle is driven for a longer period of time. The noise comes from the sealing sleeve/steering column opening on the bulkhead. Insufficient lubrication of the intermediate steering shaft in the area of the sealing sleeve.
Associated Products (24)Associated Documents - July 29, 2015•Document ID: 10128397Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- A0115362041120-2
- Date Added:
- February 5, 2018
- Manufacturer:
- AUDI
SummarySupersedes Technical Service Bulletin Group 01 number 15-26 dated June 30, 2015. The MIL is on. DTC P042000 and/or P043000 (Catalyst system Bank 1/2, Efficiency below threshold) is stored in the engine control module (ECM). The diagnostic limitations were too narrow.
Associated Products (22)Associated Documents - July 22, 2015•Document ID: 10128394Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:SOFTWARE
- Mfr Comm. #:
- A0115322040962-2
- Date Added:
- February 5, 2018
- Manufacturer:
- AUDI
SummarySupersedes Technical Service Bulletin Group 01 number 15-25 dated June 19, 2015. The MIL is on. DTC P20E800 (Reductant pressure too low) is stored in the engine control module. No relevant component or electrical problems are found when Guided Fault Finding (GFF) is run on the stored fault codes. Hardware and software update is needed.
Associated Products (8)Associated Documents - July 22, 2015•Document ID: 10058587Service Bulletin/Repair InstructionsBACK OVER PREVENTION: CAMERA SYSTEM
- Mfr Comm. #:
- TSB-91-15-04
- Date Added:
- October 16, 2015
- Manufacturer:
- AUDI
SummaryAUDI: SOME VEHICLES EXPERIENCE, INTERMITTENTLY, THE MMI DISPLAY FAILING TO DISPLAY REARVIEW CAMERA IMAGE DUE TO POSSIBLE WIRING HARNESS ISSUE. MODEL 2013-16 A4, A5, A8, Q3, Q5, Q7. *PE
Associated Products (16)Associated Documents - July 21, 2015•Document ID: 10128360Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING; ELECTRICAL SYSTEM
- Mfr Comm. #:
- A0115312033806-7
- Date Added:
- February 5, 2018
- Manufacturer:
- AUDI
SummarySupersedes Technical Service Bulletin Group 80 number 14-07 dated August 11, 2014. The MIL is on. Climate system heating performance is insufficient. Coolant level warning is on. Engine temperature is elevated. ?Limp Home? mode is active. Faults may be stored in the transmission control module. Coolant loss is found from one or more control valves: N82, N509, or N488. Coolant may have migrated into the wiring harness through the connector and into various control units. Climate system heating performance is insufficient due to coolant loss as a result of coolant migration in the electrical harness, faults in 08-Heating and Air Conditioning Electronics that result from coolant migration in the electrical harness, or a faulty N82 control valve.
Associated Products (24)Associated Documents - July 21, 2015•Document ID: 10058574Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING:COOLING SYSTEM
- Mfr Comm. #:
- TSB-01-15-31
- Date Added:
- October 13, 2015
- Manufacturer:
- AUDI
SummaryAUDI: SOME VEHICLES WILL EXPERIENCE WARNING COOLANT LEVEL IS ON, ELEVATION OF ENGINE TEMPERATURE, AN ACTIVE LIMP HOME MODE DUE TO PERFORMANCE OF CLIMATE SYSTEM HEATING IS INSUFFICIENT DUE LOSS OF COOLANT RESULTING IN COOLANT MIGRATION OF ELECTRICAL HARNESS AND AIR CONDITIONING ELECTRONICS. MODEL 2010-14 A6, 7, 8, 4, 5, A5 CABRIOLET, TT, Q5, 7. *PE
Associated Products (23)Associated Documents - July 13, 2015•Document ID: 10128480Service Bulletin/Repair InstructionsLANE DEPARTURE: ASSIST
- Mfr Comm. #:
- A9615992038421-2
- Date Added:
- February 5, 2018
- Manufacturer:
- AUDI
SummarySupersedes Technical Service Bulletin Group 96 number 14-86 dated September 25, 2014. Customer reports that the side assist is providing warnings when no vehicles are present. The radar is reflected from the rear wheels back to the sensors, resulting in a false side assist warning.
Associated Products (9)Associated Documents - July 13, 2015•Document ID: 10058590Service Bulletin/Repair InstructionsLANE DEPARTURE: ASSIST
- Mfr Comm. #:
- TSB-96-15-99
- Date Added:
- October 16, 2015
- Manufacturer:
- AUDI
SummaryAUDI: SOME VEHICLES ARE EXPERIENCING A FALSE SIDE ASSIST WARNING WHEN RADAR REFLECTS FROM BACK OF REAR WHEELS TO SENSORS AND NO OTHER VEHICLES ARE PRESENT. MODEL 2009-17 Q5. *PE
Associated Products (7)Associated Documents - July 7, 2015•Document ID: 10128399Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- A1915612025303-5
- Date Added:
- February 5, 2018
- Manufacturer:
- AUDI
SummarySupersedes Technical Service Bulletin Group 19 number 14-50 dated June 20, 2014. Discontinuation and mixing of Audi-approved engine coolants. G11, G12, and G12+ coolants have been replaced by an improved version. G12++ coolant (for service available) has been introduced in MY 2005 for all engines. G13 has been introduced in MY 2008 as factory filling and service.
Associated Products (240)Associated Documents - July 1, 2015•Document ID: 10128471Service Bulletin/Repair InstructionsPOWER TRAIN; EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL; EQUIPMENT
- Mfr Comm. #:
- A301519 2019850-
- Date Added:
- February 5, 2018
- Manufacturer:
- AUDI
SummarySupersedes Technical Service Bulletin Group 30 number 11-10 dated December 2, 2011. Clutch is not operating properly. Clutch has a burnt smell. Clutch pedal does not fully return to starting position. Incorrect shifting, the revolutions of clutch plate and engine input shaft differ too much, excessive slipping of the clutch, and when the clutch is pressed and an incorrect lower gear is selected, can result in clutch damage.
Associated Products (115)Associated Documents - July 1, 2015•Document ID: 10128469Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; ENGINE
- Mfr Comm. #:
- A0115292041097-1
- Date Added:
- February 5, 2018
- Manufacturer:
- AUDI
SummaryThe MIL is on. Customer may report that the engine runs irregularly. DTCs are stored in the ECM. On the camshaft adjustment valve, the filter element can loosen. There is no consequential damage from loosened particles in the oil circuit. They are gathered by the oil filter.
Associated Products (32)Associated Documents - July 1, 2015•Document ID: 10058584Service Bulletin/Repair InstructionsENGINE
- Mfr Comm. #:
- SB-01-15-29
- Date Added:
- October 15, 2015
- Manufacturer:
- AUDI
SummaryAUDI: ENGINE, ON SOME VEHICLES, WOULD RUN IRREGULARLY OR HAVE MALFUNCTION INDICATOR LAMP (MIL) ON OR POSSIBLE FILTER ELEMENT FOR CAMSHAFT ADJUSTMENT VALVE CAN LOOSEN AND IN OIL CIRCUIT, THERE IS NO DAMAGE FROM LOOSENED PARTICLES. MODEL ALL. ALL YEARS. *PE
Associated Products (225)Associated Documents - June 30, 2015•Document ID: 10120804Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:SOFTWARE
- Mfr Comm. #:
- A011528 2040508-
- Date Added:
- October 27, 2017
- Manufacturer:
- AUDI
SummarySupersedes Technical Service Bulletin Group 01 number 15-21 dated April 29, 2015. The MIL is on. DTC P046100 (Fuel level sensor circuit Range/Performance) is stored in the engine control module (ECM), J623 (address word 01). DTC P046100 can be caused by miscalculations within the ECM software.
Associated Products (14)Associated Documents - June 30, 2015•Document ID: 10120746Service Bulletin/Repair InstructionsPOWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM)
- Mfr Comm. #:
- A011526 2041120-
- Date Added:
- October 25, 2017
- Manufacturer:
- AUDI
SummaryThe MIL is on. DTC P042000 and/or P043000 (Catalyst system Bank 1/2, Efficiency below threshold) is stored in the engine control module (ECM), J623 (address word 01). The diagnostic limitations were too narrow.
Associated Products (22)Associated Documents