Ford Ranger Service Bulletins (2022)
87 manufacturer communications on file.
- March 17, 2022•Document ID: 10209218Service Bulletin/Repair InstructionsEQUIPMENT; VISIBILITY:DEFROSTER/DEFOGGER/HVAC SYSTEM
- Mfr Comm. #:
- SSM 50603
- Date Added:
- March 22, 2022
- Manufacturer:
- FORD
SummarySome 2019-2022 Ranger vehicles may experience condensation from the climate control system dripping on the driver's side floor and/or the driver's foot. This may be due to improper or poorly wrapped evaporator lines between the interior bulkhead and the climate control assembly case. Using a flashlight and a mirror, inspect the evaporator lines for being exposed or poorly wrapped. The cut ends of the mastic wrap should be on the top of the lines and have complete coverage. If an issue is found, cover the lines by manipulating the existing mastic wrap, or by adding more mastic to better insulate the lines and limit condensation.
Associated Products (4)Associated Documents - March 8, 2022•Document ID: 10209030Service Bulletin/Repair InstructionsEQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL; UNKNOWN OR OTHER
- Mfr Comm. #:
- SSM 50566
- Date Added:
- March 15, 2022
- Manufacturer:
- FORD
SummarySome 2022 Ford and Lincoln vehicles may need to perform A/C leak detection diagnostics. The 2022 Workshop Manual (WSM), Section 412-00 for A/C leak detection diagnosis is incomplete and is in the process of being updated. At this time, Pinpoint Test AN of Section 412-00 in the 2022 F-150 WSM can be used temporarily for the service procedure and specifications. Use the correct vehicle specific removal and replacement sections as needed. A new labor operation 19700A45 has also been released to align with the new procedure.
Associated Products (25)2022 Ford Bronco2022 Ford Bronco Sport2022 Ford E-1502022 Ford E-2502022 Ford E-3502022 Ford E-4502022 Ford Edge2022 Ford Escape2022 Ford Expedition2022 Ford Explorer2022 Ford F-2502022 Ford F-3502022 Ford F-4502022 Ford F-5502022 Ford F-6502022 Ford F-7502022 Ford Maverick2022 Ford Mustang2022 Ford Mustang Mach-E2022 Ford Ranger+ 5 moreAssociated Documents - February 21, 2022•Document ID: 10208143Service Bulletin/Repair InstructionsPOWER TRAIN
- Mfr Comm. #:
- TSB 22-2051
- Date Added:
- February 23, 2022
- Manufacturer:
- FORD
SummarySome 2019-2022 Ranger vehicles may exhibit a shudder/vibration when accelerating from a stop. This may be due to an excessive rear axle pinion angle. To correct the condition, follow the Service Procedure steps to adjust the rear axle pinion angle.
Associated Products (4)Associated Documents - February 17, 2022•Document ID: 10208146Service Bulletin/Repair InstructionsSEATS
- Mfr Comm. #:
- SSM 50502
- Date Added:
- February 23, 2022
- Manufacturer:
- FORD
SummarySome 2017-2018 Focus/MKX/C-MAX, 2017-2019 MKC/Taurus/Flex/MKT, 2017-2020 Fusion/MKZ/Continental, 2017-2022 Mustang/Edge/Explorer/Police Interceptor Utility/Escape/F-150/F-Super Duty, 2018-2022 Expedition/Navigator, 2019-2022 Ranger/Nautilus, 2020-2022 Corsair/Aviator, and 2021-2022 Mustang Mach-E vehicles may exhibit a noisy, incorrectly operating, and/or inoperative seat motor. This may be due to a damaged or inoperative seat track motor. A lower level service part has been released to correct noisy, incorrect operation/inoperative seat track motors.
Associated Products (112)2022 Ford Escape2022 Ford Expedition2022 Ford Explorer2022 Ford F-1502022 Ford F-2502022 Ford F-3502022 Ford F-4502022 Ford F-5502022 Ford Mustang2022 Ford Mustang Mach-E2022 Ford Ranger2022 Lincoln Aviator2022 Lincoln Corsair2022 Lincoln Nautilus2022 Lincoln Navigator2021 Ford Edge2021 Ford Escape2021 Ford Expedition2021 Ford Explorer2021 Ford F-150+ 92 moreAssociated Documents - February 4, 2022•Document ID: 10207891Service Bulletin/Repair InstructionsLATCHES/LOCKS/LINKAGES
- Mfr Comm. #:
- TSB 22-2026
- Date Added:
- February 16, 2022
- Manufacturer:
- FORD
SummarySome 2019-2022 Ranger crew cab vehicles may exhibit excessive latching effort when returning the rear seat backrest assembly to the upright position. This may be due to oversized rear seat backrest bumpers preventing latch to striker engagement. Vehicles built on or before 04-Feb-2019 may also have excessive deadening material inside the rear seat backrest latch. To correct this condition, follow the Service Procedure to replace the rear seat backrest bumpers and adjust the striker position.
Associated Products (4)Associated Documents - February 4, 2022•Document ID: 10207890Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; ENGINE AND ENGINE COOLING; POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM)
- Mfr Comm. #:
- TSB 22-2025
- Date Added:
- February 16, 2022
- Manufacturer:
- FORD
SummarySome 2019-2022 Ranger vehicles may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble codes (DTCs) P0300, P0301, P0302, P0303, P0304 and/or P0316 stored in the powertrain control module (PCM). This may be due to water build up in the spark plug well(s) which can lead to signs of corrosion on ignition system components. To correct the condition, follow the Service Procedure to resolve the source of all DTCs and to install an engine appearance cover.
Associated Products (4)Associated Documents - January 31, 2022•Document ID: 10207137Service Bulletin/Repair InstructionsEQUIPMENT; ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL
- Mfr Comm. #:
- SSM 50442
- Date Added:
- February 4, 2022
- Manufacturer:
- FORD
SummarySome 2019-2022 Ranger vehicles may experience an uneven and/or excessive gap existing between the instrument panel (IP) topper and the center tray/upfitter switch assembly. This may be due to a lack of rigidity in the IP topper not allowing the tray/upfitter switch assembly to latch properly. The following foam block service kits should be used to correct this condition. For vehicles equipped with an IP tray, order service part # KB3Z-2104338-AG, which includes a new IP tray and foam blocks. For vehicles equipped with the upfitter switch assembly, order service part # KB3Z-2104338-A, which only includes the foam blocks. If a new upfitter switch assembly is required, this must be ordered separately. Follow the installation instructions included with each kit to install the foam blocks and repair the vehicle.
Associated Products (4)Associated Documents