Dodge Ram Service Bulletins (2012)
378 manufacturer communications on file.
- February 25, 2014•Document ID: 10063260Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:SOFTWARE
- Mfr Comm. #:
- 18-012-14
- Date Added:
- April 26, 2016
- Manufacturer:
- RAM
SummarySUMMARY TO BE PROVIDED ON A FUTURE DATE.
Associated Products (3)Associated Documents - February 12, 2014•Document ID: 10136937Service Bulletin/Repair InstructionsVISIBILITY:GLASS, SIDE/REAR
- Mfr Comm. #:
- 9002228
- Date Added:
- May 21, 2018
- Manufacturer:
- DODGE
SummaryPart Description: Rear Window Glass Assembly Issue Description: ISSUE 1: [P/N 55277406AA]~ It is not necessary to replace the entire rear power window glass assembly when the rubber channel on top of sliding glass is falling out. Order only the replacement rubber channel (P/N 68080080AA) or the plastic slider (P/N 68166526AA) depending on which part is damaged.
Associated Products (3)Associated Documents - December 3, 2013•Document ID: 10064542Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING:EXHAUST SYSTEM
- Mfr Comm. #:
- 25-006-13
- Date Added:
- May 13, 2016
- Manufacturer:
- RAM
SummarySUMMARY TO BE PROVIDED ON A FUTURE DATE.
Associated Products (9)Associated Documents - November 29, 2013•Document ID: 10069152Service Bulletin/Repair InstructionsPOWER TRAIN:AXLE HUBS
- Mfr Comm. #:
- D-13-45
- Date Added:
- June 2, 2016
- Manufacturer:
- DODGE
SummarySUMMARY TO BE PROVIDED ON A FUTURE DATE.
Associated Products (2)Associated Documents - October 19, 2013•Document ID: 10062717Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:SOFTWARE; EQUIPMENT:ELECTRICAL:NAVIGATIONAL SYSTEM(GLOBAL POSITIONING SYSTEM)
- Mfr Comm. #:
- 08-070-13REV.C
- Date Added:
- April 26, 2016
- Manufacturer:
- JEEP
SummarySUMMARY TO BE PROVIDED ON A FUTURE DATE.
Associated Products (9)Associated Documents - October 10, 2013•Document ID: 10062716Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:SOFTWARE
- Mfr Comm. #:
- 08-070-13REV.B
- Date Added:
- April 26, 2016
- Manufacturer:
- DODGE
SummarySUMMARY TO BE PROVIDED ON A FUTURE DATE.
Associated Products (9)Associated Documents - September 25, 2013•Document ID: 10062715Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:SOFTWARE
- Mfr Comm. #:
- 08-070-13REV.A
- Date Added:
- April 26, 2016
- Manufacturer:
- DODGE
SummarySUMMARY TO BE PROVIDED ON A FUTURE DATE.
Associated Products (6)Associated Documents - September 10, 2013•Document ID: 10062718Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:SOFTWARE
- Mfr Comm. #:
- 08-070-13
- Date Added:
- April 26, 2016
- Manufacturer:
- DODGE
SummarySUMMARY TO BE PROVIDED ON A FUTURE DATE.
Associated Products (9)Associated Documents - August 15, 2013•Document ID: 10064537Service Bulletin/Repair InstructionsENGINE
- Mfr Comm. #:
- 25-004-013
- Date Added:
- May 13, 2016
- Manufacturer:
- DODGE
SummarySUMMARY TO BE PROVIDED ON A FUTURE DATE.
Associated Products (3)Associated Documents - August 14, 2013•Document ID: 10062142Service Bulletin/Repair InstructionsEQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC.; ELECTRICAL SYSTEM
- Mfr Comm. #:
- 08-026-13REV.B
- Date Added:
- April 12, 2016
- Manufacturer:
- RAM
SummarySUMMARY TO BE PROVIDED ON A FUTURE DATE.
Associated Products (43)Associated Documents - August 1, 2013•Document ID: 10052923Service Bulletin/Repair InstructionsSTRUCTURE:FRAME AND MEMBERS; SUSPENSION:FRONT
- Mfr Comm. #:
- SR-N41
- Date Added:
- September 24, 2013
- Manufacturer:
- DODGE
SummaryDODGE: SEE DOCUMENT SEARCH BUTTON FOR OWNER LETTER. ON SOME TRUCKS, THE TRACK BAR TO FRAME BOLT, ON FRONT SUSPENSIONS HAVE INCORRECT LENGTH AND COULD CAUSE BOLT, WHILE DRIVING, TO BREAK AND/OR FALL OUT, WITH A LOSS OF DIRECTIONAL CONTROL. MODELS 2013 RAM 4500, 5500 CAB CHASSIS. *PE
Associated Products (1)Associated Documents - July 30, 2013•Document ID: 10061879Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- 07-001-13
- Date Added:
- April 12, 2016
- Manufacturer:
- DODGE
SummarySUMMARY TO BE PROVIDED ON A FUTURE DATE.
Associated Products (4)Associated Documents - June 6, 2013•Document ID: 10220404Service Bulletin/Repair InstructionsAIR BAGS; POWER TRAIN
- Mfr Comm. #:
- N26060613
- Date Added:
- September 26, 2022
- Manufacturer:
- DODGE
SummaryNew Safety Recall Advanced Communication ? N26060613 Chrysler Group LLC (Chrysler) announced a safety recall on certain 2012 model year (DP) 4500/5500 series RAM 4x4 Trucks. Some of the above trucks may have a front axle with improper axle tube-to-differential housing welds. If the axle tube welds fail, the front axle differential housing could rotate relative to the axle tubes. This could cause the front propeller shaft to bind up or fracture the front propeller shaft universal joint. Chrysler will conduct a voluntary safety recall on all involved vehicles to either replace the front axle or install an axle brace to prevent differential housing rotation. Dealers will be notified of the launch of this safety recall by way of established methods used in the past. We ask that you please take the time to ensure that your personnel are aware of this communication and are prepared to execute a customer friendly process for inquiries on involved vehicles.
Associated Products (1)Associated Documents - June 6, 2013•Document ID: 10189172Service Bulletin/Repair InstructionsAIR BAGS; POWER TRAIN
- Mfr Comm. #:
- N26060613
- Date Added:
- March 22, 2021
- Manufacturer:
- DODGE
SummaryNew Safety Recall Advanced Communication ? N26060613 Chrysler Group LLC (Chrysler) announced a safety recall on certain 2012 model year (DP) 4500/5500 series RAM 4x4 Trucks. Some of the above trucks may have a front axle with improper axle tube-to-differential housing welds. If the axle tube welds fail, the front axle differential housing could rotate relative to the axle tubes. This could cause the front propeller shaft to bind up or fracture the front propeller shaft universal joint. Chrysler will conduct a voluntary safety recall on all involved vehicles to either replace the front axle or install an axle brace to prevent differential housing rotation. Dealers will be notified of the launch of this safety recall by way of established methods used in the past. We ask that you please take the time to ensure that your personnel are aware of this communication and are prepared to execute a customer friendly process for inquiries on involved vehicles.
Associated Products (1)Associated Documents - May 22, 2013•Document ID: 10216003Service Bulletin/Repair InstructionsSERVICE BRAKES; ELECTRICAL SYSTEM; EQUIPMENT
- Mfr Comm. #:
- 9002350
- Date Added:
- July 18, 2022
- Manufacturer:
- DODGE
SummaryPart Description: Integrated Trailer Brake Module Issue Description: Before replacing an Integrated Trailer Brake Module (ITBM) please review the following items.~ 1. The ITBM does not control the trailer lights. If the trailer lights are not working, do not change the ITBM.~ 2. If the Diagnostic Trouble Code(DTC) reported by the ITBM is C10C7-11 "Electronic Trailer Brake Control Output Short to Ground" or C10C7-12 "Electronic Trailer Brake Control Output Short to Battery", please verify the wiring on the trailer. The purpose of this faults is to protect the ITBM output from faulty trailer wiring.~ 3. If the customer complaint is ITBM not detecting the trailer connection. Do not change the ITBM until the system has been verified with load simulation and confirmed that ITBM is not recognizing the load. If load simulation indicates that the ITBM is operating properly, please verify the trailer wiring.~ 4. ITBM output will not be available if a trailer is not connect and plugged into the vehicle. The ITBM must detect a trailer before you will get trailer brake output.~ 5. Please follow the service manual procedures before changing the ITBM.~ This part can only be used as a replacement on vehicles with the Integrated Trailer Brake system already installed. Do not attempt to use this module for the purpose of adding the Integrated Trailer Brake system to a vehicle that was not originally equipped. You will encounter configuration difficulties. MOPAR has developed a kit, part number 82212548 to be used for installation of the Integrated Trailer Brake system on vehicles.
Associated Products (8)Associated Documents - May 22, 2013•Document ID: 10215990Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- 18-022-13
- Date Added:
- July 18, 2022
- Manufacturer:
- DODGE
SummaryCummins 6.7L Turbo Diesel Common Diagnostic Process New 6.7L Cummins®Turbo Diesel Common Diagnostic Process is now available as part of the standard diagnostic process located in TechCONNECT>Service Info.
Associated Products (17)Associated Documents - May 22, 2013•Document ID: 10188698Service Bulletin/Repair InstructionsELECTRICAL SYSTEM: INTEGRATED TRAILER BRAKE CONTROL; EQUIPMENT; ELECTRICAL SYSTEM
- Mfr Comm. #:
- 9002350
- Date Added:
- March 15, 2021
- Manufacturer:
- DODGE
SummaryPart Description: Integrated Trailer Brake Module Issue Description: Before replacing an Integrated Trailer Brake Module (ITBM) please review the following items.~ 1. The ITBM does not control the trailer lights. If the trailer lights are not working, do not change the ITBM.~ 2. If the Diagnostic Trouble Code(DTC) reported by the ITBM is C10C7-11 "Electronic Trailer Brake Control Output Short to Ground" or C10C7-12 "Electronic Trailer Brake Control Output Short to Battery", please verify the wiring on the trailer. The purpose of this faults is to protect the ITBM output from faulty trailer wiring.~ 3. If the customer complaint is ITBM not detecting the trailer connection. Do not change the ITBM until the system has been verified with load simulation and confirmed that ITBM is not recognizing the load. If load simulation indicates that the ITBM is operating properly, please verify the trailer wiring.~ 4. ITBM output will not be available if a trailer is not connect and plugged into the vehicle. The ITBM must detect a trailer before you will get trailer brake output.~ 5. Please follow the service manual procedures before changing the ITBM.~ This part can only be used as a replacement on vehicles with the Integrated Trailer Brake system already installed. Do not attempt to use this module for the purpose of adding the Integrated Trailer Brake system to a vehicle that was not originally equipped. You will encounter configuration difficulties. MOPAR has developed a kit, part number 82212548 to be used for installation of the Integrated Trailer Brake system on vehicles.
Associated Products (8)Associated Documents - May 22, 2013•Document ID: 10188685Service Bulletin/Repair InstructionsEQUIPMENT; ENGINE AND ENGINE COOLING:ENGINE:DIESEL
- Mfr Comm. #:
- 18-022-13
- Date Added:
- March 15, 2021
- Manufacturer:
- DODGE
SummaryCummins 6.7L Turbo Diesel Common Diagnostic Process New 6.7L Cummins®Turbo Diesel Common Diagnostic Process is now available as part of the standard diagnostic process located in TechCONNECT>Service Info.
Associated Products (17)Associated Documents - May 22, 2013•Document ID: 10136876Service Bulletin/Repair InstructionsTRAILER HITCHES; ELECTRICAL SYSTEM
- Mfr Comm. #:
- 9002350
- Date Added:
- May 21, 2018
- Manufacturer:
- DODGE
SummaryPart Description: Integrated Trailer Brake Module Issue Description: Before replacing an Integrated Trailer Brake Module (ITBM) please review the following items.~ 1. The ITBM does not control the trailer lights. If the trailer lights are not working, do not change the ITBM.~ 2. If the Diagnostic Trouble Code(DTC) reported by the ITBM is C10C7-11 "Electronic Trailer Brake Control Output Short to Ground" or C10C7-12 "Electronic Trailer Brake Control Output Short to Battery", please verify the wiring on the trailer. The purpose of this faults is to protect the ITBM output from faulty trailer wiring.~ 3. If the customer complaint is ITBM not detecting the trailer connection. Do not change the ITBM until the system has been verified with load simulation and confirmed that ITBM is not recognizing the load. If load simulation indicates that the ITBM is operating properly, please verify the trailer wiring.~ 4. ITBM output will not be available if a trailer is not connect and plugged into the vehicle. The ITBM must detect a trailer before you will get trailer brake output.~ 5. Please follow the service manual procedures before changing the ITBM.~ This part can only be used as a replacement on vehicles with the Integrated Trailer Brake system already installed. Do not attempt to use this module for the purpose of adding the Integrated Trailer Brake system to a vehicle that was not originally equipped. You will encounter configuration difficulties. MOPAR has developed a kit, part number 82212548 to be used for installation of the Integrated Trailer Brake system on vehicles.
Associated Products (3)Associated Documents - May 22, 2013•Document ID: 10136863Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING:ENGINE:DIESEL; FUEL SYSTEM, DIESEL
- Mfr Comm. #:
- 18-022-13
- Date Added:
- May 21, 2018
- Manufacturer:
- RAM
SummaryCummins 6.7L Turbo Diesel Common Diagnostic Process New 6.7L Cummins®Turbo Diesel Common Diagnostic Process is now available as part of the standard diagnostic process located in TechCONNECT>Service Info.
Associated Products (11)Associated Documents