Bentley Flying Spur Service Bulletins (2021)
714 manufacturer communications on file.
- August 7, 2023•Document ID: 10241161Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; EXTERIOR LIGHTING
- Mfr Comm. #:
- 2070344/1
- Date Added:
- September 7, 2023
- Manufacturer:
- BENTLEY
SummaryHeadlamp control unit replacement - Bentayga and New Flying Spur. Customer statement: Headlamp is not working or the headlamp is flickering Workshop findings Headlamp assembly diagnosed as faulty. Technical background: It is not possible to determine between internal lamp defects and control unit failures therefore this TPI is to advise the replacement of the control unit in the first instance The complete headlamp assembly should only be replaced if control unit replacement was not successful.
Associated Products (5)Associated Documents - August 7, 2023•Document ID: 10240565Service Bulletin/Repair InstructionsVISIBILITY; VISIBILITY:DEFROSTER/DEFOGGER/HVAC SYSTEM; ELECTRICAL SYSTEM
- Mfr Comm. #:
- 2069806/2
- Date Added:
- September 7, 2023
- Manufacturer:
- BENTLEY
SummaryHVAC refrigerant leakage suspected Or reports of a damp/musty smell within the cabin - Diagnosis guidelines. Customer statement / workshop findings: HVAC not cooling / HVAC cooling less than expected / HVAC refrigerant leakage confirmed Or The customer reports a damp/musty smell within the cabin Note: For this scenario please see the pre requisites below - Should no HVAC leak be evident and a damp/musty smell has been reported/identified the operative should first confirm that water is not leaking into the cabin please refer to all VIN applicable TPIs particularly TPI 2062622/- - Should there be no water leaks evident, the operative should check the HVAC and body drains for blockages, in the event the drains are blocked the drains must be unblocked, once this has been completed the operative should confirm if the damp/musty smell is still evident. In the event that HVAC cleaning products are required, these MUST be sourced locally. Before using the cleaner the operative must inform the customer of the product which will be used, a neutral fragrance cleaner should be used as the customer may not like the smell of the cleaner should a fragranced product be used Please ensure all supporting information is included within the DISS query when requesting permission to clean the HVAC system including clear photographs and/or videos showing the reported issue, should the required information not be supplied the warranty claim could be cancelled.
Associated Products (9)Associated Documents - August 2, 2023•Document ID: 10240549Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 2071131/1
- Date Added:
- September 7, 2023
- Manufacturer:
- BENTLEY
SummaryMeasured values - Cycle recording instructions. Customer statement / workshop findings: In some cases Measured value traces may be requested in XML format for analysis by Product Support Technical background: The instructions within the Measure section of this TPI have been generated to guide operatives through the process for recording Measured values in cycles by using self diagnosis, the Instructions also detail how to locate corresponding files which are required for analysis Product Support will advise regarding the Measured values and cycle time required.
Associated Products (8)Associated Documents - July 28, 2023•Document ID: 10240226Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; SEAT BELTS
- Mfr Comm. #:
- 2071006/1
- Date Added:
- August 3, 2023
- Manufacturer:
- BENTLEY
SummaryRear seatbelt - Incorrect buckle status within the DIP - New Continental GT/C and New Flying Spur. Customer statement: Incorrect rear seatbelt buckle status shown within the DIP Workshop findings Although there is no occupant evident within the rear seats (2nd row) the rear seat is shown as occupied (Figure 1). Technical background: There is no specific DTC evident for the scenario described. The issue described is evident as the rear seat belt buckles are not resistor coded The system uses a non-resistor coded buckle strategy (zero-infinity or open-closed buckle) for the rear seats. In correct operation, a fastened seatbelt is open circuit and an un-fastened seatbelt is closed circuit If harness damage is present or an electrical connector joint is not properly engaged, an unintended open circuit occurs. This will give an incorrect buckle status reading within the DIP The advice within this TPI should be referred to first before conducting any further diagnosis or disassembly of the vehicles interior Previous assembly/disassembly may have caused an unintentional open circuit when operatives have been working on or around the rear seat belt assemblies.
Associated Products (3)Associated Documents - July 25, 2023•Document ID: 10239719Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 2068946/3
- Date Added:
- August 3, 2023
- Manufacturer:
- BENTLEY
SummaryBentley dynamic ride system warning displayed - DTC P0B2500: Hybrid/EV Battery "A" Voltage low' stored (48 volt system). Customer statement: Bentley dynamic ride system: fault displayed within the Drivers Instrument Panel (DIP) Workshop findings: DTC P0B2500: Hybrid/EV Battery "A" Voltage low' stored within address 21-Battery Energy Control Module 2 Technical background: Possible internal fault with super capacitor - In the event that DTC P0B2500 is evident the operative must follow the steps within the Measure section to completion
Associated Products (6)Associated Documents - July 13, 2023•Document ID: 10239515Service Bulletin/Repair InstructionsSUSPENSION; ELECTRICAL SYSTEM
- Mfr Comm. #:
- 2070768/1
- Date Added:
- August 3, 2023
- Manufacturer:
- BENTLEY
SummaryNew Continental GT/C & New Flying Spur - Air suspension warning light in the DIP. Customer statement: Air suspension warning light within the DIP Workshop findings: Various suspension DTCs are evident within address 74 relating to the following: - Level control valve mechanical malfunction Or - Solenoid for the level control system (Open circuit). Technical background: NOTE: An electrical integrity check must be conducted before replacing any parts The solenoid valve block and/or control unit must be replaced first (symptom dependent) before replacing the air supply unit, in the event the issue is still evident and the air supply unit assembly is suspected as being at fault, the operative must request permission via DISS before replacing the air supply control unit assembly.
Associated Products (3)Associated Documents - July 13, 2023•Document ID: 10239487Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING; ELECTRICAL SYSTEM
- Mfr Comm. #:
- 2051187/9
- Date Added:
- August 3, 2023
- Manufacturer:
- BENTLEY
SummaryPoor Engine Running Complaints (Misfires) Petrol Engines Only. Customer statement / workshop findings: - Poor engine running - Reduced power - Engine warning lamp illuminated - Symptom related DTCs evident within the applicable engine control unit(s) Technical background: Technical Product Information (TPI) to assist retailers when diagnosing poor engine running or misfires.
Associated Products (7)Associated Documents - July 13, 2023•Document ID: 10239486Service Bulletin/Repair InstructionsEQUIPMENT; ELECTRICAL SYSTEM; BACK OVER PREVENTION: SENSING SYSTEM: CAMERA
- Mfr Comm. #:
- 2051045/8
- Date Added:
- August 3, 2023
- Manufacturer:
- BENTLEY
SummaryNight vision camera washer jet nozzle leaking. Customer statement / workshop findings: Washer fluid dripping/leaking from the night vision camera jet nozzle. Technical background: Please note: The photographs shown within this TPI are not based on a specific vehicle type, the procedure to replace the night vision non return valve is the same regardless of vehicle type In the event the afore mentioned symptom is evident the operative should refer to the Measure section of this TPI to replace the non return valve.
Associated Products (6)Associated Documents - July 13, 2023•Document ID: 10239485Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING; VISIBILITY:DEFROSTER/DEFOGGER/HVAC SYSTEM
- Mfr Comm. #:
- 2070682/1
- Date Added:
- August 3, 2023
- Manufacturer:
- BENTLEY
SummaryLoud ticking/clatter noise from the air conditioning compressor (HVAC). Customer statement Loud ticking/clatter noise can be heard from the front of the engine Workshop findings The noise is from the air conditioning compressor Technical background The operative should confirm the noise is from the compressor as detailed within the Measure section.
Associated Products (6)Associated Documents - July 7, 2023•Document ID: 10239709Service Bulletin/Repair InstructionsSTRUCTURE; VISIBILITY
- Mfr Comm. #:
- 2070638/1
- Date Added:
- August 3, 2023
- Manufacturer:
- BENTLEY
SummaryWater ingress into the front cabin footwell/bulkhead - Glass misting on the inside - Front carpets/mats wet. Customer statement: - Water ingress into the left and/or right hand foot well - Front carpets and/or foot mats are wet - The windows are misty due to water ingress Workshop findings - After conducting TPI 2062622/- water ingress was found at the location shown in Figure1 (Left hand A - Pillar seam). The cause of the ingress can be caused by missing sealant on the A - post pillar seam.
Associated Products (3)Associated Documents - July 7, 2023•Document ID: 10239484Service Bulletin/Repair InstructionsEQUIPMENT; ELECTRICAL SYSTEM
- Mfr Comm. #:
- 2063729/3
- Date Added:
- August 3, 2023
- Manufacturer:
- BENTLEY
SummaryFitment of control modules from donor vehicles for test purposes. Technical background: If an issue is suspected for one of the control modules listed below: - Onboard supply control unit (J519) - Convenience system central control unit (J393) - Data bus diagnostics interface (J533) - Control unit 1 for Information Electronics (J794) - Control unit in dash panel insert (J285) - Emergency call module control unit (J949) The fitment of donor parts from another vehicle is not advisable and only possible if approved from Product Support via an open DISS query. The donor of parts should only be used as a temporary test VERY IMPORTANT: The ODIS replace routine MUST NOT be carried out under any circumstances.
Associated Products (7)Associated Documents - June 26, 2023•Document ID: 10238927Service Bulletin/Repair InstructionsEQUIPMENT; ENGINE AND ENGINE COOLING
- Mfr Comm. #:
- 2070699.1
- Date Added:
- July 8, 2023
- Manufacturer:
- BENTLEY
SummaryEngine oil pan (sump) requires removal - Visual checks required once the oil pan is removed (SC23/18) -Technical Background: -The engine oil pan requires removal, once removed a visual check is required to confirm if a desiccant bag and/or debris is evident
Associated Products (2)Associated Documents - June 26, 2023•Document ID: 10238922Service Bulletin/Repair InstructionsSUSPENSION:REAR:SPRINGS:AIR SUSPENSION SYSTEM; SUSPENSION
- Mfr Comm. #:
- 2070030.1
- Date Added:
- July 8, 2023
- Manufacturer:
- BENTLEY
SummaryKnocking noise from rear the rear air springs - Up to approximately 30 kmh/18mph Customer Statement: -During light acceleration up to 30kmh/18mph a noise may be heard from the rear air springs
Associated Products (3)Associated Documents - June 22, 2023•Document ID: 10238921Service Bulletin/Repair InstructionsSEAT BELTS
- Mfr Comm. #:
- 2070675.1
- Date Added:
- July 8, 2023
- Manufacturer:
- BENTLEY
SummaryDTC's stored for the 3rd row rear seat belts although the vehicle does not have a 3rd row Customer Statement: -One or a combination of the following DTCâÂÂs are evident within the airbag control unit J234
Associated Products (3)Associated Documents - June 22, 2023•Document ID: 10238905Service Bulletin/Repair InstructionsBACK OVER PREVENTION: SENSING SYSTEM: CAMERA; ELECTRICAL SYSTEM:ADAS:REAR OCCUPANT ALERT (ROA):CAMERA/SENSOR; ELECTRICAL SYSTEM
- Mfr Comm. #:
- 2055254.4
- Date Added:
- July 8, 2023
- Manufacturer:
- BENTLEY
SummaryTop view/Rear view camera - guidelines not visible Customer Statement: -Guidelines not showing on display screen when reverse gear selected.
Associated Products (5)Associated Documents - June 21, 2023•Document ID: 10238906Service Bulletin/Repair InstructionsVISIBILITY:POWER WINDOW DEVICES AND CONTROLS; ELECTRICAL SYSTEM
- Mfr Comm. #:
- 2070519.1
- Date Added:
- July 8, 2023
- Manufacturer:
- BENTLEY
SummaryWindow lift switch is loose within the switch carrier and/or a rattle noise can be heard from the switch Customer Statement: -Window lift switch is loose within the door aperture -Or The window lift switch rattles when the door is closed
Associated Products (6)Associated Documents - June 21, 2023•Document ID: 10238904Service Bulletin/Repair InstructionsSTEERING
- Mfr Comm. #:
- 2062095.3
- Date Added:
- July 8, 2023
- Manufacturer:
- BENTLEY
SummaryDTC's B14BF01 and /or B14A854 evident in address 0009 - Steering column will not adjust Customer Statement: -Steering column will not adjust in any direction
Associated Products (6)Associated Documents - June 20, 2023•Document ID: 10238920Service Bulletin/Repair InstructionsEQUIPMENT
- Mfr Comm. #:
- 2051937.8
- Date Added:
- July 8, 2023
- Manufacturer:
- BENTLEY
SummaryFront centre console lid (cup holder assembly) fails to latch/unlatch -Technical Background: -Application of grease to both of the centre console storage box frame ribs (Figure 1) as described within the Measure section is required
Associated Products (3)Associated Documents - June 20, 2023•Document ID: 10238919Service Bulletin/Repair InstructionsSTEERING
- Mfr Comm. #:
- 2060446.7
- Date Added:
- July 8, 2023
- Manufacturer:
- BENTLEY
SummaryClicking noise from the front wheels when conducting a static lock to lock steering manoeuvre -Technical Background: -Verify the customer complaint matches the video within the Bentley Hub - Reference TPI Transaction number 2060446/-
Associated Products (3)Associated Documents - June 19, 2023•Document ID: 10238926Service Bulletin/Repair InstructionsPARKING BRAKE; ELECTRICAL SYSTEM
- Mfr Comm. #:
- 2066556.2
- Date Added:
- July 8, 2023
- Manufacturer:
- BENTLEY
SummaryElectronic Park Brake (EPB) actuator replacement (SC22/12) -Technical Background: -A small batch of Electronic Park Brake actuators (EPB) require replacement, the specific batch of parts were identified during a supplier quality inspection
Associated Products (1)Associated Documents