Audi TT Service Bulletins (2012)
701 manufacturer communications on file.
- September 23, 2013•Document ID: 10251000Service Bulletin/Repair InstructionsSTEERING
- Mfr Comm. #:
- 40133520231873
- Date Added:
- March 4, 2024
- Manufacturer:
- AUDI
SummarySqueaking noises when steering or maneuvering
Associated Products (102)Associated Documents - September 23, 2013•Document ID: 10250659Service Bulletin/Repair InstructionsSTEERING
- Mfr Comm. #:
- 4013352023187
- Date Added:
- February 26, 2024
- Manufacturer:
- AUDI
SummarySqueaking noises when steering or maneuvering
Associated Products (102)Associated Documents - September 23, 2013•Document ID: 10121365Service Bulletin/Repair InstructionsEQUIPMENT ADAPTIVE/MOBILITY
- Mfr Comm. #:
- A901341 2010353-
- Date Added:
- October 31, 2017
- Manufacturer:
- AUDI
SummarySupersedes Technical Service Bulletin Group 90 number 10-14 dated August 10, 2010. Cigarette lighter element will not lock into the lighter socket -U1- to begin the heating process, or the lighter element will not automatically release once the heating process has completed. As a result, the socket can become inoperative when used as a power outlet.
Associated Products (187)Associated Documents - September 23, 2013•Document ID: 10121332Service Bulletin/Repair InstructionsWHEELS; STEERING
- Mfr Comm. #:
- A401335 2023187-
- Date Added:
- October 31, 2017
- Manufacturer:
- AUDI
SummarySupersedes Technical Service Bulletin Group 40 number 12-23 dated May 14, 2012. Squeaking noises are heard when the steering wheel is turned or maneuvered. The noises may be more prevalent in wet weather. The folds of the outer rubber boots on the front axle shafts may come in contact with each other when the steering wheel is turned, causing squeaking noises. These noises are more likely to occur when the vehicle is new. The volume and occurrence of the noise will dissipate after a short break-in period.
Associated Products (64)Associated Documents - September 16, 2013•Document ID: 10228324Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING:ENGINE:ENGINE CONTROL MODULE (ECU/ECM); ENGINE AND ENGINE COOLING
- Mfr Comm. #:
- 01132920332232
- Date Added:
- January 3, 2023
- Manufacturer:
- AUDI
SummaryThe programmed values for the misfiring recognition are not automatically reset by deleting the memory once.
Associated Products (37)Associated Documents - September 16, 2013•Document ID: 10225003Service Bulletin/Repair InstructionsEQUIPMENT:ELECTRICAL
- Mfr Comm. #:
- 01132920332232
- Date Added:
- October 31, 2022
- Manufacturer:
- AUDI
SummaryThe programmed values for the misfiring recognition are not automatically reset by deleting the memory once.
Associated Products (37)Associated Documents - September 16, 2013•Document ID: 10221976Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- 01132920332232
- Date Added:
- September 26, 2022
- Manufacturer:
- AUDI
SummaryThe programmed values for the misfiring recognition are not automatically reset by deleting the memory once.
Associated Products (37)Associated Documents - September 16, 2013•Document ID: 10243780Service Bulletin/Repair InstructionsEQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
- Mfr Comm. #:
- Edition53
- Date Added:
- October 10, 2023
- Manufacturer:
- AUDI
SummaryAudi Elsa Newsletter
Associated Products (264)Associated Documents - September 16, 2013•Document ID: 10121320Service Bulletin/Repair InstructionsENGINE
- Mfr Comm. #:
- A011329 2033223-
- Date Added:
- October 31, 2017
- Manufacturer:
- AUDI
SummarySupersedes Technical Service Bulletin Group 01 number 13-73 dated March 7, 2013. The engine warning light is on after engine replacement. The engine is not running roughly. However, the engine control module, J623 (01), is storing one or more of the following engine misfire fault codes: DTCs P0300 - P0304. The fault codes occur at light load, between 8% and 14% accelerator pedal position. The programmed values for the misfiring recognition are not automatically reset by deleting the memory once.
Associated Products (32)Associated Documents - September 13, 2013•Document ID: 10121342Service Bulletin/Repair InstructionsWHEELS; STEERING
- Mfr Comm. #:
- A481354 2028220-
- Date Added:
- October 31, 2017
- Manufacturer:
- AUDI
SummarySupersedes Technical Service Bulletin Group 48 number 12-30 dated June 25, 2012. Steering wheel appearance damaged due to external impact (e.g., contact with finger nails, zippers, watches, rings, etc.). External impact (e.g., contact with finger nails, zippers, watches, rings etc.) can cause damage to the appearance of the steering wheel. This type of damage is not warrantable, as numerous investigations have shown that there is no fault in material or workmanship.
Associated Products (112)Associated Documents - September 11, 2013•Document ID: 10121367Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- A911304 2013422-
- Date Added:
- October 31, 2017
- Manufacturer:
- AUDI
SummarySupersedes Technical Service Bulletin Group 91 number 12-49 dated July 31, 2012. The Bluetooth® telephone cannot be connected to the vehicle?s Infotainment system. Certain restrictions are present when a Bluetooth device is connected to the vehicle. The restrictions vary depending on the vehicle system present.
Associated Products (117)Associated Documents - September 11, 2013•Document ID: 10121362Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:WIRING
- Mfr Comm. #:
- A801305 2033806-
- Date Added:
- October 31, 2017
- Manufacturer:
- AUDI
SummarySupersedes Technical Service Bulletin Group 80 number 13-04 dated August 9, 2013. Malfunction Indicator Lamp is on. Climate system heating performance is insufficient. Coolant level warning is on. Engine temperature is elevated. ?Limp Home? mode is active. Faults are stored in the transmission control module. Coolant loss is found from one or more control valves: N82, N509, or N488. Coolant may have migrated into the wiring harness through the connector and into various control units. Climate system heating performance is insufficient due to coolant loss, or due to a faulty N82 control valve. Inspection of the coolant control valves N82, N509, or N488 reveals the presence of coolant inside the electrical connector as shown in the illustration. The connectors, wiring harness, and/or connected control units may have been damaged from exposure to coolant.
Associated Products (24)Associated Documents - September 5, 2013•Document ID: 10121324Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- A101310 2018288-
- Date Added:
- October 31, 2017
- Manufacturer:
- AUDI
SummarySupersedes Technical Service Bulletin Group 10 number 10-02 dated September 14, 2010. Prior to engine replacement, any debris lodged in transferred assemblies must be removed. If the vehicle's engine experienced a serious mechanical problem, it is possible that small pieces of metal debris resulting from the mechanical problem may have become deposited in the intake manifold, air intake hoses, exhaust manifolds, exhaust down-pipes, turbocharger, supercharger, and/or intercooler. If these pieces are not removed prior to the installation and operation of the replacement engine, the pieces may be drawn into the combustion chamber, which can cause a knocking noise and subsequent serious engine damage.
Associated Products (154)Associated Documents - September 3, 2013•Document ID: 10121347Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- A611321 2010342-
- Date Added:
- October 31, 2017
- Manufacturer:
- AUDI
SummarySupersedes Technical Service Bulletin Group 61 number 11-14 dated August 16, 2011. Convertible top exterior cloth appears soiled. The convertible top is made of durable fabric that has been treated at the factory with a compound that helps repel dirt and water. With proper care, the cloth will retain its function and proper appearance for a long time. It is normal, however, for the fabric to change color somewhat as it ages. This is particularly true of lighter-color tops. The cloth tension changes when the top is opened, which can cause kinks. When the top is closed, the kinks improve after a short time. However, these material-related kinks can never be completely avoided. In addition, dirt and dust can deposit in the kinks. If these dirt and dust deposits are not properly removed in a car wash, they can contribute to poor appearance
Associated Products (37)Associated Documents - August 30, 2013•Document ID: 10124638Service Bulletin/Repair InstructionsEQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC.
- Mfr Comm. #:
- A911302 2018187-
- Date Added:
- December 5, 2017
- Manufacturer:
- AUDI
SummarySupersedes Technical Service Bulletin Group 91 number 11-20 dated October 21, 2011. Customer may report that cracking, grinding, rattling, humming, whining, or similar interference is coming from one or more speakers. Parts of the speakers (such as the brackets, cables, or covers) or parts of the interior fittings (such as door covers, rear shelf, facings, or covers) can vibrate at certain frequencies, causing noises. The radio tuner or other control modules may be affected by electromagnetic interference from aftermarket electronic devices.
Associated Products (125)Associated Documents - August 14, 2013•Document ID: 10124645Service Bulletin/Repair InstructionsVISIBILITY:WINDSHIELD
- Mfr Comm. #:
- A641329 2020552-
- Date Added:
- December 5, 2017
- Manufacturer:
- AUDI
SummaryWindshield is streaked, has a snakeskin appearance, or its surface feels rough. Residue from industrial fallout as well as normal road dirt and grime may accumulate on windshield.
Associated Products (144)Associated Documents - August 14, 2013•Document ID: 10124613Service Bulletin/Repair InstructionsSERVICE BRAKES
- Mfr Comm. #:
- Dealer Letter -
- Date Added:
- December 5, 2017
- Manufacturer:
- AUDI
SummaryThis communication is to inform you of Update 47I6. On Audi TTRS vehicles manufactured within a period brake noise may be present from the front brakes. Install updated brake components.
Associated Products (2)Associated Documents - August 9, 2013•Document ID: 10124649Service Bulletin/Repair InstructionsEQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
- Mfr Comm. #:
- A511306 2009967-
- Date Added:
- December 5, 2017
- Manufacturer:
- AUDI
SummarySupersedes Technical Service Bulletin Group 00 number 11-23 dated June 3, 2011. Instructions for vehicle inspection, protection removal, and detailing.
Associated Products (63)Associated Documents - August 9, 2013•Document ID: 10124643Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:WIRING; EQUIPMENT:APPLIANCE:AIR CONDITIONER
- Mfr Comm. #:
- A801304 2033806-
- Date Added:
- December 5, 2017
- Manufacturer:
- AUDI
SummarySupersedes Technical Service Bulletin Group 80 number 13-03 dated May 13, 2013. Malfunction Indicator Lamp is on. Climate system heating performance is insufficient. Coolant level warning is on. Engine temperature is elevated. "Limp Home" mode is active. Faults are stored in the transmission control module. Coolant loss is found from one or more control valves: N82, N509, or N488. Coolant may have migrated into the wiring harness through the connector and into various control units. Climate system heating performance is insufficient due to coolant loss, or due to a faulty N82 control valve. Inspection of the coolant control valves N82, N509, or N488 reveals the presence of coolant inside the electrical connector. The connectors, wiring harness, and/or connected control units may have been damaged from exposure to coolant.
Associated Products (19)Associated Documents - August 9, 2013•Document ID: 10053889Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING:COOLING SYSTEM
- Mfr Comm. #:
- TSB-80-13-04
- Date Added:
- December 2, 2013
- Manufacturer:
- AUDI
SummaryAUDI: PRESENCE OF COOLANT LOSS INSIDE ELECTRICAL CONNECTOR, CAUSES ENGINE WARNING LIGHT TO ILLUMINATE AND TEMPERATURE OF ENGINE TO ELEVATE AND FAILURE OF CLIMATE SYSTEM HEATING PERFORMANCE. MODEL 2010-2012 A6, A7, A8, Q7, A5 CABRIOLET, TT, A4, Q5. *PE
Associated Products (17)Associated Documents