Audi Q5 Service Bulletins (2013)
1,661 manufacturer communications on file.
- September 11, 2013•Document ID: 10226505Service Bulletin/Repair InstructionsLANE DEPARTURE; POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE:SOFTWARE; ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL
- Mfr Comm. #:
- 37131720290278
- Date Added:
- November 21, 2022
- Manufacturer:
- AUDI
SummaryTransmission warning message in cluster
Associated Products (17)Associated Documents - September 11, 2013•Document ID: 10121367Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- A911304 2013422-
- Date Added:
- October 31, 2017
- Manufacturer:
- AUDI
SummarySupersedes Technical Service Bulletin Group 91 number 12-49 dated July 31, 2012. The Bluetooth® telephone cannot be connected to the vehicle?s Infotainment system. Certain restrictions are present when a Bluetooth device is connected to the vehicle. The restrictions vary depending on the vehicle system present.
Associated Products (117)Associated Documents - September 11, 2013•Document ID: 10121362Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:WIRING
- Mfr Comm. #:
- A801305 2033806-
- Date Added:
- October 31, 2017
- Manufacturer:
- AUDI
SummarySupersedes Technical Service Bulletin Group 80 number 13-04 dated August 9, 2013. Malfunction Indicator Lamp is on. Climate system heating performance is insufficient. Coolant level warning is on. Engine temperature is elevated. ?Limp Home? mode is active. Faults are stored in the transmission control module. Coolant loss is found from one or more control valves: N82, N509, or N488. Coolant may have migrated into the wiring harness through the connector and into various control units. Climate system heating performance is insufficient due to coolant loss, or due to a faulty N82 control valve. Inspection of the coolant control valves N82, N509, or N488 reveals the presence of coolant inside the electrical connector as shown in the illustration. The connectors, wiring harness, and/or connected control units may have been damaged from exposure to coolant.
Associated Products (24)Associated Documents - September 11, 2013•Document ID: 10121329Service Bulletin/Repair InstructionsPOWER TRAIN
- Mfr Comm. #:
- A371317 2029027-
- Date Added:
- October 31, 2017
- Manufacturer:
- AUDI
SummarySupersedes Technical Service Bulletin Group 37 number 13-02 dated April 26, 2013. Customer may report transmission warning light is illuminated. In some cases, the vehicle will not move after being started and placed into gear. After key cycle, the vehicle drives without restriction. DTCs is stored in the transmission control module (TCM). If DFCCs do not match exactly, this TSB does not apply.
Associated Products (17)Associated Documents - September 11, 2013•Document ID: 10054865Service Bulletin/Repair InstructionsPOWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM)
- Mfr Comm. #:
- TSB-37-13-17
- Date Added:
- March 6, 2014
- Manufacturer:
- AUDI
SummaryAUDI: THE TRANSMISSION CONTROL MODULE SOFTWARE WOULD ILLUMINATE IN INSTRUMENT CLUSTER AND VEHICLE FAILS TO MOVE AFTER SHIFTING INTO GEAR AND NEW SOFTWARE IS NEEDED TO ADDRESS CONDITION. *PE
Associated Products (15)Associated Documents - September 10, 2013•Document ID: 10121363Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING:COOLING SYSTEM:HOSES/LINES/PIPING/FITTINGS
- Mfr Comm. #:
- A871345 2024644-
- Date Added:
- October 31, 2017
- Manufacturer:
- AUDI
SummarySupersedes Technical Service Bulletin Group 87 number 13-41 dated May 30, 2013. Moisture in the driver or front passenger foot well. Due to a faulty and/or incorrectly installed condensation drain hose, condensation from the evaporator could enter the front foot well areas through a gap between the body and the sealing surface of the drain hose.
Associated Products (26)Associated Documents - September 10, 2013•Document ID: 10121341Service Bulletin/Repair InstructionsSTEERING
- Mfr Comm. #:
- A481353 2035178-
- Date Added:
- October 31, 2017
- Manufacturer:
- AUDI
SummaryOn vehicles equipped with a manual transmission, a steering warning may briefly display in the instrument cluster when the engine is restarted after improper use of the clutch pedal. For example, the warning may appear when the engine is restarted after the clutch pedal has been released too quickly during low-RPM, low-speed parking lot maneuvers. A yellow steering warning symbol with the message ?Steering fault. You can continue driving.? A red steering warning symbol with the message ?Steering defective. Do not drive the vehicle.? Codes may be stored in the diagnostic log under the power steering control module. The vehicle system voltage drops when the starter motor is operating. Because the power steering control module has a parallel circuit with the starter motor (terminal 29), this normal voltage drop may set a symptom code within the scenario described in the Condition section of this bulletin.
Associated Products (3)Associated Documents - September 9, 2013•Document ID: 10243779Service Bulletin/Repair InstructionsEQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
- Mfr Comm. #:
- Edition52
- Date Added:
- October 10, 2023
- Manufacturer:
- AUDI
SummaryAudi Elsa Newsletter
Associated Products (15)Associated Documents - September 9, 2013•Document ID: 10121364Service Bulletin/Repair InstructionsELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL; ELECTRICAL SYSTEM:SOFTWARE
- Mfr Comm. #:
- A901340 2029781-
- Date Added:
- October 31, 2017
- Manufacturer:
- AUDI
SummarySupersedes Technical Service Bulletin Group 90 number 12-30 dated June 26, 2012. The driver information system (DIS) display screen is completely blank or appears to be all white The condition is intermittent and the DIS can function normally when the key is cycled off and back on. This condition only affects vehicles with the highline instrument cluster. The issue is attributed to incorrect software for clusters with the Hitachi display screen.
Associated Products (8)Associated Documents - September 5, 2013•Document ID: 10068104Service Bulletin/Repair InstructionsSEATS
- Mfr Comm. #:
- 2030729/3
- Date Added:
- May 23, 2016
- Manufacturer:
- AUDI
SummarySUMMARY TO BE PROVIDED ON A FUTURE DATE.
Associated Products (5)Associated Documents - September 5, 2013•Document ID: 10121354Service Bulletin/Repair InstructionsSEATS
- Mfr Comm. #:
- A721305 2030729-
- Date Added:
- October 31, 2017
- Manufacturer:
- AUDI
SummarySupersedes Technical Service Bulletin Group 72 number 12-04 dated November 30, 2012. Customer may report hearing squeak or rattle sounds coming from the rear seat area. The rattle sound may be caused from the pivot point of the torsion bar within the 2/3 rear seat backrest pivot assembly. The squeak noise may be coming from the rear seat armrest area, specifically from the contact surface between the armrest lock and the striker pin.
Associated Products (5)Associated Documents - September 5, 2013•Document ID: 10121344Service Bulletin/Repair InstructionsLATCHES/LOCKS/LINKAGES; ELECTRICAL SYSTEM
- Mfr Comm. #:
- A571393 2035173-
- Date Added:
- October 31, 2017
- Manufacturer:
- AUDI
SummaryCustomer may report that the automatic door lock function cannot be deactivated. The ?Lock when driving? (Autolock) configuration setting has been discontinued starting in some model year 2013 vehicles, and it is no longer available in the Car >> Vehicle Settings category in the MMI. The vehicle can still be unlocked while it is being driven, at any time, with the central locking switch in the door.
Associated Products (3)Associated Documents - September 5, 2013•Document ID: 10121324Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- A101310 2018288-
- Date Added:
- October 31, 2017
- Manufacturer:
- AUDI
SummarySupersedes Technical Service Bulletin Group 10 number 10-02 dated September 14, 2010. Prior to engine replacement, any debris lodged in transferred assemblies must be removed. If the vehicle's engine experienced a serious mechanical problem, it is possible that small pieces of metal debris resulting from the mechanical problem may have become deposited in the intake manifold, air intake hoses, exhaust manifolds, exhaust down-pipes, turbocharger, supercharger, and/or intercooler. If these pieces are not removed prior to the installation and operation of the replacement engine, the pieces may be drawn into the combustion chamber, which can cause a knocking noise and subsequent serious engine damage.
Associated Products (154)Associated Documents - September 3, 2013•Document ID: 10251021Service Bulletin/Repair InstructionsSTEERING
- Mfr Comm. #:
- 44134020277795
- Date Added:
- March 4, 2024
- Manufacturer:
- AUDI
SummarySteering rack control unit cannot be coded
Associated Products (12)Associated Documents - September 3, 2013•Document ID: 10121336Service Bulletin/Repair InstructionsSTEERING
- Mfr Comm. #:
- A441340 2027779-
- Date Added:
- October 31, 2017
- Manufacturer:
- AUDI
SummarySupersedes Technical Service Bulletin Group 48 number 12-33 dated October 22, 2012. After replacing the electromechanical steering with the control unit J500, the unit cannot be coded via SVM spec/actual. All new replacement power steering control units (J500) must be coded and parameterized using online SVM spec/actual or an SVM code. If the SVM spec/actual returns a response of ?Check Hardware?, then the SVM code is required to code and parameterize the new replacement control unit. The SVM code can be found in Parts Bulletin 9-97, which is available online through ETKA.
Associated Products (14)Associated Documents - August 30, 2013•Document ID: 10124638Service Bulletin/Repair InstructionsEQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC.
- Mfr Comm. #:
- A911302 2018187-
- Date Added:
- December 5, 2017
- Manufacturer:
- AUDI
SummarySupersedes Technical Service Bulletin Group 91 number 11-20 dated October 21, 2011. Customer may report that cracking, grinding, rattling, humming, whining, or similar interference is coming from one or more speakers. Parts of the speakers (such as the brackets, cables, or covers) or parts of the interior fittings (such as door covers, rear shelf, facings, or covers) can vibrate at certain frequencies, causing noises. The radio tuner or other control modules may be affected by electromagnetic interference from aftermarket electronic devices.
Associated Products (125)Associated Documents - August 29, 2013•Document ID: 10124673Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- A011326 2033919-
- Date Added:
- December 5, 2017
- Manufacturer:
- AUDI
SummarySupersedes Technical Service Bulletin Group 01 number 13-20 dated August 2, 2013. MIL on. DTCs are stored in the engine control module. There may be slight power reduction at high RPMs. One of the vacuum actuators on intake runner bank 1 or bank 2 is defective. It is possible that the membrane on the vacuum actuator may tear. As a result, the intake manifold flaps do not function.
Associated Products (6)Associated Documents - August 29, 2013•Document ID: 10124672Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- A011327 2033768-
- Date Added:
- December 5, 2017
- Manufacturer:
- AUDI
SummarySupersedes Technical Service Bulletin Group 01 number 13-89 dated May 2, 2013. MIL on. A cylinder misfire fault (DTC P0301 - P0306) with DTC P130A is stored in the engine control module (ECM), J623 (address word 01).
Associated Products (15)Associated Documents - August 26, 2013•Document ID: 10124641Service Bulletin/Repair InstructionsEQUIPMENT:APPLIANCE:AIR CONDITIONER
- Mfr Comm. #:
- A871344 2020124-
- Date Added:
- December 5, 2017
- Manufacturer:
- AUDI
SummarySupersedes Technical Service Bulletin Group 87 number 13-43 dated July 12, 2013. Air conditioning is inoperative. The HVAC blower functions normally. The A/C pressure/temperature sensor, G395, leaks refrigerant. This causes sensor G395 to show an incorrect or implausible value when reading MVBs. An incorrect signal or a low refrigerant level in the system can cause the air conditioning compressor to deactivate. Battery discharged; however, when charged, there is no bus silence when vehicle ignition is off. The LIN cable connecting the vehicle electrical system control module, J519, to sensor G395 is pinched or cut. This affects the A4/S4, A5/S5 Coupe and Cabriolet, and Q5 vehicles. The A6 and A8 are not affected by this type of failure. The pressure sensor G395/G65 sends an incorrect signal that prevents bus silence and the battery is discharged. Sensor G395 is a LIN slave of the vehicle electrical system control module. The vehicle electrical system control module transfers the information provided by the sensor via the comfort data bus to the climate control module, J255.
Associated Products (39)Associated Documents - August 26, 2013•Document ID: 10124631Service Bulletin/Repair InstructionsLANE DEPARTURE: ASSIST; ELECTRICAL SYSTEM:SOFTWARE
- Mfr Comm. #:
- A961372 2035047-
- Date Added:
- December 5, 2017
- Manufacturer:
- AUDI
SummaryAudi Lane Change Assistant deactivates or is sporadically inoperative when the vehicle is driven in slow-moving stop-and-go traffic, especially on roads with multiple lanes. The message "Audi side assist unavailable: Sensors blocked" appears in the driver information system. The system is able to be activated approximately ten minutes after the traffic condition is removed, or after an ignition cycle. Audi Lane Change Assistant can be activated without issue. No obstructions can be found. DTCs are stored in the Lane Change Assistance control module. The control module mounting brackets are securely fastened to the lower rear bumper, and no damage is found to the rear bumper area, on the inside or outside. (If any damage is found, it is not covered under warranty.) The control module mounting brackets are not broken or loose. If a loose bracket is found, repair as necessary using the Elsa Repair Manual. Submit a separate warranty claim, as this TSB does not cover this repair. The software of the Lane Change Assistance control module can deactivate the Audi Side Assist system in certain normal driving conditions because the nature of these driving conditions make it difficult for the Audi Side Assist system to track vehicles.
Associated Products (8)Associated Documents