2023 Alfa Romeo Stelvio ParkSense Inoperative TSB
A manufacturer communication, TSB 10243139, has been issued for the 2023 Alfa Romeo Stelvio regarding the ParkSense/Park Assist system becoming inoperative. This issue is typically caused by short or open circuit DTCs detected in the Park Assist Module (PAM) for all sensors.

Owners of the 2023 Alfa Romeo Stelvio may experience an issue where the ParkSense/Park Assist system becomes inoperative. This condition, detailed in Manufacturer Communication TSB 10243139, affects the vehicle's ability to detect obstacles and assist with parking maneuvers. The communication highlights specific diagnostic trouble codes (DTCs) related to the electrical integrity of the parking sensor system.
Symptoms
The primary symptom for this issue is the complete failure of the ParkSense/Park Assist system. Owners will notice that the system provides no feedback or warnings when attempting to use parking assistance features. The dashboard or infotainment system may display a warning message indicating that the system is inoperative. This means the 2023 Alfa Romeo Stelvio ParkSense inoperative state prevents the vehicle from providing crucial parking aid.
Fault Conditions
According to TSB 10243139, the inoperative condition is typically associated with the detection of specific electrical faults. These include a "Short Circuit To Ground" or an "Open Circuit" condition for all sensors connected to the Park Assist Module (PAM). When these conditions are present, the Park Assist Module (PAM) will set corresponding DTCs, disabling the entire system.
Affected Component
The core component implicated in this issue is the Park Assist Module (PAM). This module is responsible for processing signals from the parking sensors and providing the necessary warnings and assistance. Faults within the wiring leading to the sensors, or potentially within the module itself, can lead to the described short or open circuit conditions.
Repair Procedure Summary
While the specific repair steps are not detailed in the summary, the presence of TSB 10243139 indicates that Alfa Romeo has identified the root cause and has a recommended diagnostic and repair procedure for dealerships. Technicians will likely need to diagnose the electrical circuits for the parking sensors, checking for short circuits to ground or open circuits. This may involve inspecting wiring harnesses, connectors, and the sensors themselves, as well as the Park Assist Module (PAM).
Owner Action
If you own a 2023 Alfa Romeo Stelvio and are experiencing an inoperative ParkSense/Park Assist system, it is recommended to schedule an appointment with an authorized Alfa Romeo dealership. Inform them about the "Parksense/Park Assist Is Inoperative" condition and mention TSB 10243139. The dealership will be able to perform the necessary diagnostics and repairs under warranty if applicable.
Source: NHTSA ID: 10243139
Frequently Asked Questions
- What does 'Parksense/Park Assist Is Inoperative' mean for my 2023 Alfa Romeo Stelvio?
- This means your vehicle's parking assistance system, which uses sensors to detect obstacles, is not functioning. You will not receive visual or audible warnings when parking, increasing the risk of minor collisions.
- What causes the 2023 Alfa Romeo Stelvio ParkSense inoperative issue?
- According to TSB 10243139, the issue is typically caused by electrical faults such as a 'Short Circuit To Ground' or an 'Open Circuit' detected for all sensors connected to the Park Assist Module (PAM).
- Is there a specific DTC code for this ParkSense problem?
- The manufacturer communication mentions that DTCs related to 'Short Circuit To Ground' or 'Open Circuit' for all sensors in the Park Assist Module (PAM) will be set, indicating a general electrical fault rather than a single specific code like a P-code.
- What should I do if my 2023 Alfa Romeo Stelvio's ParkSense system is not working?
- You should contact your authorized Alfa Romeo dealership to schedule service. Inform them of the 'Parksense/Park Assist Is Inoperative' symptom and reference Manufacturer Communication TSB 10243139 for a proper diagnosis and repair.
Related Articles
2021-2025 Alfa Romeo Stelvio P1CEA Engine Light TSB
This manufacturer communication (TSB 9100325) details diagnostic steps for the 'Engine Light On with P1CEA (Boost Side EVAP Purge System Performance)' condition in 2021-2025 Alfa Romeo Stelvio and other vehicles. It advises checking for improperly connected or kinked purge hoses before replacing…
2021-2023 Alfa Romeo Stelvio / Jeep Renegade Radio Part TSB
A manufacturer communication, TSB 9100668, addresses proper part number ordering for replacement radios in 2021-2023 Alfa Romeo Stelvio and 2021 Jeep Renegade vehicles. It specifies using 'Z' part numbers for exchange orders and '68' part numbers for new, unsold units.
2013-2026 Stellantis Aluminum Body Panel Corrosion
Stellantis has issued TSB 31-001-25 REV. A regarding aluminum body panel corrosion on hoods, hinges, doors, fenders, swing gates, and liftgates for numerous 2013-2026 models. This bulletin is currently on hold.
2023 Alfa Romeo Stelvio P0606 PCM Software Update
Owners of 2023 Alfa Romeo Stelvio vehicles experiencing a Malfunction Indicator Lamp (MIL) illumination, DTC P0606 (Control Module Processor), or limp-in mode may need a Powertrain Control Module (PCM) software update as per TSB 18-003-25 REV. A.
2023 Alfa Romeo Stelvio P0606 MIL Illumination TSB
Owners of 2023 Alfa Romeo Stelvio vehicles experiencing a Malfunction Indicator Lamp (MIL) illumination with DTC P0606 or the vehicle entering limp-in mode may need a Powertrain Control Module (PCM) software update, as detailed in Technical Service Bulletin (TSB) 18-003-25.
Leave a comment
Comments are moderated and may take a moment to appear. Only your first name and the initial of your last name are shown publicly.
Comments
Be the first to comment.